The first objective of this study is to highlight the effect of the rejuvenator on the linear viscoelastic (LVE) properties of various blends of a fresh 50/70 binder and a reclaimed asphalt pavement (RAP) binder, with a rejuvenator (a mixture of vegetal oils). A total of 17 binders (including pure fresh and RAP binders) produced as blends of two base binders and a rejuvenator in various proportions were tested. Dynamic shear rheometer tests were performed, and the experimental results were modelled using the 2S2P1D model. The second main objective was to present and analyse two different approaches for estimation of 2S2P1D parameters and temperature shift factors of binder blends, based on reduced experimental data (only data for the base constituents). Good correlation was found between the direct determination and the estimated results. However, a more accurate estimation was performed with the second approach.
1 February 2021 in Construction and Building Materials
The rheological behaviour of various blends of a fresh binder (50/70 penetration grade) and a RAP-extracted binder, with and without regenerating agent, was studied. A mixture of vegetal oils was used as regenerating agent in different dosages (0%, 5%, 10% and 15% by mass of RAP binder). The RAP binder content used for blends was calculated in order to reproduce the exact amount of RAP binder within a mixture containing 50% of RAP material, according to its binder content. A total of 6 binders were tested, including 4 blends (corresponding to 4 regenerating agent contents) and pure fresh and RAP binders. Penetration, softening point and elongation tests were performed. Rheological behaviour was characterized in terms 14of complex shear modulus by means of Dynamic Shear Rheometer (DSR) tests. The steady-shear viscosity of all binders was calculated from complex modulus test results and its relation with penetration was studied.
The purpose of this study was to evaluate the influence of anti-stripping green additives on the behaviour of a fresh binder. Firstly, the adhesiveness (spectrophotometric method) and affinity (rolling bottles method) of a binder with a penetration grade of 50/70 on two types of aggregates (natural quarry aggregates from two different sources) were investigated. The results show a weak bond and stripping between the 50/70 binder and the aggregates. Therefore, two different anti-stripping green additives (named A and B) were used in three percentages. A total of six blends were tested to establish the optimal content of the additive by performing a series of conventional tests combined with the adhesiveness test and the affinity test. Finally, the rheological behaviour of the optimal blends and of the fresh binder was investigated by performing DSR tests. The 0.4% dosage of green additive B was considered the most effective due to the fact that this dosage did not have a significant influence on the conventional properties and rheological behaviour of the 50/70 binder but had a major impact on the adhesiveness (15% increase), affinity after 6 h (13% increase), and affinity after 24 h (25% increase).
This study focuses on the investigation of the effect of a reclaimed asphalt material (RAP) and a bio-rejuvenator (mix of vegetable oils) on the stiffness modulus and indirect tensile strength (ITS) values of eight bituminous mixtures produced by using three types of compaction, with different RAP amounts (25% and 50%) and rejuvenator (0%, 0.20%, 0.40% and 0.60% by mass of RAP). A conventional hot mix asphalt was considered as the reference mix. All tests were performed on cylindrical samples produced using: Marshall compaction with 50 blows/side, cored cylindrical specimens from slabs compacted using a roller compactor (39 passes), and, respectively, gyratory compaction on 80 gyrations. Stiffness modulus and ITS values showed strong linear variation with the increase in rejuvenator content, independently of test temperature and type of compaction. The rejuvenating effect of the bio-rejuvenator was observed to counterbalance the impact of RAP. The results at 20 °C for gyratory specimens for the mix with 50% RAP and 0.40% bio-rejuvenator were comparable/closer (under 5% relative difference) to those obtained for the reference mix. A strong correlation between stiffness modulus values of mixes and penetration values of the corresponding binder blends was obtained ().