A multi-parameter sensor based on dumbbell-shaped double-cladding fiber (DCF) structure cascaded long period fiber grating (LPFG) is proposed and fabricated. It is formed by discharging between single mode fiber (SMF) and DCF to form a waist-enlarged taper and then cascading two LPFGs. When the fiber is affected by the thermal expansion effect, thermo-optic effect and elasto-optic effect, the resonant peaks formed by inter-mode interference will shift, and the shifts generated by different resonant peaks are also different. By demodulating the wavelength shift of the three resonant peaks, the temperature, refractive index and axial strain can be measured by using the coefficient sensitivity matrix. The experimental results show that the temperature sensitivity of the three resonance peaks is 14.79pm/°C, 69.07pm/°C and 89.83pm/°C in the range of 25°C~80°C. The refractive index sensitivities of three resonance peaks are 14.27nm/RIU, -71.39nm/RIU and -141.07nm/RIU in the range of 1.3355~1.3715. The axial strain sensitivities of three resonance peaks are -2.26pm/με, -2.5pm/με and -3.14pm/με in the range of 75με~525με. The corresponding resolutions are 0.6905°C, 0.00054RIU and 36.323με, respectively. The sensor is simple and has good linearity. It can be widely used in environmental monitoring for different parameter.
A highly sensitive temperature probe based on a liquid cladding elliptical micro/nanofiber is proposed, which exploits a fiber loop mirror with an output port probe for remote and highly-sensitive measurements based on evanescent field coupling. The thermo-optical effective liquid cladding avoids the influence of other environmental parameters (except for temperature), while protecting the micro/nanofibers from external disturbance and contamination. This renders the sensing probe only sensitive to temperature changes, making it suitable for real-world temperature measurements. An isopropanol cladding elliptical microfiber with a diameter of 3.4 µm demonstrated a sensitivity of −16.38 nm/°C for a remote temperature measurement.
This Letter proposes a highly birefringent one-air-hole panda fiber, which is fabricated by corroding a single stress zone of the traditional panda-type polarization-maintaining fiber (PMF). An additional geometric asymmetry is induced in the fiber to increase the birefringence effect and enhance the light–matter interaction, which improves the performance of the sensor and the device applications of the special fiber. A theoretical and experimental analysis of the one-air-hole panda fiber demonstrates that the birefringence of the fiber can be of the order of 10−3, which is one order of magnitude higher than that of the traditional panda-type fiber. The corroded region provides a microchannel to be filled with a functional material to compose optical fiber sensors; a sample of a salt solution was filled into the microchannel to measure the refractive index with a sensitivity of 3760 nm/RIU (refractive index units).