Wahyono Suprapto

Prof. Dr. Wahyono Suprapto

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 March 2018 in Engineering review
Verified
Journal Article
Open access
PDF file
WSWahyono Suprapto
Wahyono Suprapto
RSRudy Soenoko
Rudy Soenoko
FGFemiana Gapsari
Femiana Gapsari
Corrosion in the reservoir and transport vessel often causes a leak that leads to disaster. Data prediction and experimental corrosion in storage technology is very important to prevent damage and reduce maintenance costs. Theoretically, steel tank corrosion by sulfuric acid working medium can be minimized with the formation of sediments oxide by oxidation-reduction reaction. Behavioral inhibition of bee wax propolis on the 304SS in 0.5 M sulfuric acid was carried by potentiodynamic polarization. Based on the polarization testing the corrosion rate of the 304SS in a solution of 0.5 M H2SO4 is at 0.349 g/m2d with the missing mass amounted 5.21 x10 -9 g/s. In experiments, the inhibitor causing less mass loss is equal to 2.28 x 10 -11 g/s. Mass lost without and with inhibitor in this study is also known by theoretical calculations. The mass losses can be used to determine the inhibition efficiency. The calculation of the efficiency theoretically and experimentally gives the same result.

29 March 2019 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
WSWahyono Suprapto
Wahyono Suprapto
Generally, an expired structure aluminum is recycled into raw materials for the next casting process or component products. Slag and aluminum left in the ladle caused low melting efficiency. Microstructure formed in the castings components solidification process is often used to control mechanical properties and the castings fabrication. The purpose of this study is to improve structure aluminum recycling process quality. This recycling study used structure aluminum raw materials with recycling levels variations in the 1st, 2nd, 3rd, and 4th. In the first recycling, the structure aluminum pieces as melting raw materials weighing 2 kg were put in the induction furnace for melting. Let the aluminum pieces melted in the furnace and the temperature continued to rise to 700oC. Next, separated and took the floating slag on top of liquid aluminum, lifted the ladle from the furnace and poured the aluminum in the ingot mold from the permanent mold. After the ingots in the mold were being frozen and cooled, removed the ingots from the mold to be weighed and tested for microstructure. In the second recycling, the melted raw material was the first recycling ingot with the same procedure. In the third recycle, the melted raw material was the second recycling ingot with the same procedure; and the third recycling, the raw material that was melted was the third recycling ingot with the same procedure. Then the slag and ingot was weighed, and microstructure photos from the ingots were taken. From the microstructural photographs results, a calculation process can be performed to determine the grain size of each specimen. For smelting efficiency testing results at each recycling stages respectively 1st, 2nd, 3rd, and 4th were 76.23%, 82.64%, 85.17%, and 89.55%. The largest microstructure diameter at the first recycling for the surface part was 42,512 µm and the center was 43,314 µm. The smallest grain diameter of the 3rd recycling for the surface part was 42,164 µm and the center was 42,346 µm.

5 March 2018 in Matéria (Rio de Janeiro)
Verified
Journal Article
Open access
PDF file
SRSri Mulyo Bondan Respati
Sri Mulyo Bondan Respati
RSRudy Soenoko
Rudy Soenoko
YIYudy Surya Irawan
Yudy Surya Irawan
WSWahyono Suprapto
Wahyono Suprapto
Natural zeolite ceramic is a material that can be used as bioceramics but it is fragile to crack. The weakness of ceramics can be overcome by making ceramic metals. The use of SS316 (stainless steel 316) fiber to strengthen the zeolite ceramic had been done in order to determine the interfacial relationship by using a fiber pull-out test. The content of SS316 fiber in the zeolite ceramic matrix, before and after the sintering, had been examined by using atomic absorption spectrum tests. The content of the elements in SS316 fiber, zeolite ceramic matrix and the interface layer was became clear by using EDX and XRD test. The results showed that the higher the sintering temperature, the higher the interfacial shear stress on pull-out test as well. However, at a temperature of 900°C, the interfacial shear stress on pull-out test became low because of the Fe, FeNi, and CrFe was arisen in a thin layer of the interface. The optimum of the temperature sintering for making ceramic zeolite matrix and SS16 fibers was 850°C because of the highest interfacial shear stress.

21 December 2019 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
YIYudy Surya Irawan
Yudy Surya Irawan
FRFakhri Razaq
Fakhri Razaq
WSWahyono Suprapto
Wahyono Suprapto
BWBayu Satriya Wardhana
Bayu Satriya Wardhana
Tensile strength and fatigue crack growth rate of chamfered and clamped A6061 friction weld joints

15 December 2019 in Jurnal Rekayasa Mesin
Verified
Journal Article
Open access
PDF file
MPMuhammad Rezki Fitri Putra
Muhammad Rezki Fitri Putra
WSWahyono Suprapto
Wahyono Suprapto
ASAchmad As'Ad Sonief
Achmad As'Ad Sonief
Pengaruh Kecepatan Pengadukan Proses Rheocasting terhadap Struktur Mikro dan Fluiditas Paduan Al-Cu