Optimal power dispatch is essential to improve the power system’s safety, stability, and optimal operation. The present research proposes a multi-objective optimization methodology to solve the real and reactive power dispatch problem by minimizing the active power losses and generation costs based on mixed-integer nonlinear programming (MINLP) using the epsilon constraint method and fuzzy satisficing approach. The proposed methodology was tested on the IEEE 30-bus system, in which each objective function was modeled and simulated independently to verify the results with what is obtained via Digsilent Power Factory and then combined, which no longer allows for the simulation of Digsilent Power Factory. One of the main contributions was demonstrating that the proposed methodology is superior to the one available in Digsilent Power Factory, since this program only allows for the analysis of single-objective problems.
15 April 2026 in Simposio Internacional sobre la Calidad de la Energía Eléctrica - SICEL
The coordination of inverse-time overcurrent protection relays (51 relays) requires careful consideration to achieve an appropriate balance of selectivity, speed, and reliability when the system is subjected to faults. This study presents an evaluation of optimization algorithms using both linear and nonlinear programming methods available in Python’s SciPy library. The setting parameters considered are the Time Dial Setting (TDS), Pickup Setting (PS), and Time-Current Characteristic (TCC) curves, which must be efficiently configured. Several solvers were analyzed, including: highs, highs-ds, highs-ipm, simplex, revised simplex, interior-point, COBYLA, SLSQP, and trust-constr. Each was evaluated based on three criteria: relay operating time, sensitivity to fault current, and computational efficiency. The results indicate that the differences in total solver execution times are minimal, on the order of 1×10⁻⁷ seconds. However, highs-ipm and COBYLA demonstrated superior performance in terms of both speed and accuracy. Moreover, the inclusion of multiple setting parameters significantly enhances the overall effectiveness of the protection system. The study concludes that the optimal solver choice depends on the trade-off between computational time and solution accuracy. This research lays a strong foundation for future work involving the application of linear and nonlinear programming techniques in relay protection settings.
15 April 2026 in Simposio Internacional sobre la Calidad de la Energía Eléctrica - SICEL
The increase in integration of renewable energy sources (RESs) for sustainable and environmentally friendly power generation has led to significant changes in traditional power systems. Due to the variability of the primary resources used by RESs, battery energy storage systems (BESSs) have been implemented as a solution to address the aforementioned issue. In general, BESSs are used to provide ancillary services and participate in electricity markets, among other applications. In this context, their use can cause both technical and economic benefits, making essential a proper management of these systems. Therefore, this study presents a literature review of the most relevant aspects related to BESS architecture and asset management. Through this review, the objective is to identify the value that this asset can provide to the responsible entity for its operation, in order to achieve technical and economic benefits.