Chengxing Li

Chengxing Li


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 July 2025 in Nature Communications
Verified
Journal Article
Open access
PDF file
JZJia Zheng
Jia Zheng
RWRuobing Wang
Ruobing Wang
WFWencheng Fang
Wencheng Fang
CLChengxing Li
Chengxing Li
JZJiarui Zhang
Jiarui Zhang
ZSZhitang Song
Zhitang Song
Phase change memory has been regarded as a promising candidate for storage class memory application. However, the high switching current and limited switching endurance remain a critical challenge. In this work a switching endurance beyond 1.1 × 1011 cycles is demonstrated in the mushroom-type memory device with nano-cofined structure and carbon-doped GeSbTe material. The over-programming of the memory cell induced by excessive RESET current gives rise to the recrystallization of the active phase change volume which accelerates the inward migration of carbon atoms to the bottom heater. The cyclic switching exacerbates the over-programming effect with denser carbon cluster accumulated at the boundary of the active region which causes the stuck-RESET failure. The nano-confined cell structure enables efficient heating by relocating the melt-quench region away from the interface to the dielectric layer which substantially reduces the RESET energy and, consequently, mitigates the over-programming effect and significantly extends the switching cycles.

1 February 2022 in Materials Science in Semiconductor Processing
Verified
Journal Article
Closed access
ZCZi-Jing Cui
Zi-Jing Cui
DCDao-Lin Cai
Dao-Lin Cai
YLYang Li
Yang Li
CLChengxing Li
Chengxing Li
ZSZhi-Tang Song
Zhi-Tang Song

1 July 2021 in ECS Journal of Solid State Science and Technology
Verified
Journal Article
Closed access
CLChengxing Li
Chengxing Li
DCDaolin Cai
Daolin Cai
DFDaohuan Feng
Daohuan Feng
ZCZijing Cui
Zijing Cui
WLWeili Liu
Weili Liu
ZSZhitang Song
Zhitang Song
Titanium nitride (TiN) is preferred for use as the bottom electrode contact due to its excellent thermal stability and suitable electrical conductivity. We have studied the effect of using potassium permanganate (KMnO 4 ), L-Aspartic Acid (L-Asp) and alumina abrasives as slurry in chemical mechanical polishing (CMP) of TiN film. Different concentrations of potassium permanganate and different concentrations of L-aspartic acid additives were applied to the CMP of TiN. The results show that KMnO 4 and L-Asp can increase removal rate and improve the surface smoothness of TiN. The removal mechanism of TiN was analyzed by XPS and electrochemical tests, and the TiN film was characterized by atomic force microscope and scanning electron microscope.

15 March 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
JZJiarui Zhang
Jiarui Zhang
WFWencheng Fang
Wencheng Fang
RWRuobing Wang
Ruobing Wang
CLChengxing Li
Chengxing Li
JZJia Zheng
Jia Zheng
XZXilin Zhou
Xilin Zhou
High density phase change memory array requires both minimized critical dimension (CD) and maximized process window for the phase change material layer. High in-wafer uniformity of the nanoscale patterning of chalcogenides material is challenging given the optical proximity effect (OPE) in the lithography process and the micro-loading effect in the etching process. In this study, we demonstrate an approach to fabricate high density phase change material arrays with half-pitch down to around 70 nm by the co-optimization of lithography and plasma etching process. The focused-energy matrix was performed to improve the pattern process window of phase change material on a 12-inch wafer. A variety of patternings from an isolated line to a dense pitch line were investigated using immersion lithography system. The collapse of the edge line is observed due to the OPE induced shrinkage in linewidth, which is deteriorative as the patterning density increases. The sub-resolution assist feature (SRAF) was placed to increase the width of the lines at both edges of each patterning by taking advantage of the optical interference between the main features and the assistant features. The survival of the line at the edges is confirmed with around a 70 nm half-pitch feature in various arrays. A uniform etching profile across the pitch line pattern of phase change material was demonstrated in which the micro-loading effect and the plasma etching damage were significantly suppressed by co-optimizing the etching parameters. The results pave the way to achieve high density device arrays with improved uniformity and reliability for mass storage applications.

10 October 2022 in Journal of Materials Chemistry C
Verified
Journal Article
Closed access
PDF file
JZJia Zheng
Jia Zheng
WFWencheng Fang
Wencheng Fang
CLChengxing Li
Chengxing Li
WLWeili Liu
Weili Liu
SSSannian Song
Sannian Song
XZXilin Zhou
Xilin Zhou
Chemical mechanical planarization (CMP) is receiving a growing interest in the fabrication of phase change memory in order to achieve a highly scaled confined cell structure and global planarization within wafers of up to 12 inches in diameter. In this work the H2O2 containing slurry with colloidal silica abrasive was investigated in the CMP of a carbon-doped Ge2Sb2Te5 (C-GST) film at various pH levels. In a slurry of pH 2, Ge and Sb were oxidized while Te remained unchanged. Under alkaline conditions, the dissolution effect of the slurry on the oxide layer enhanced, leading to the mechanical polishing mechanism. In a slurry of pH 5, the lowest surface roughness (0.517 nm) was achieved. Electrochemical impedance spectroscopy analysis indicated that the pH level of slurry affects the equilibrium of passivation and corrosion reaction on the surface of the C-GST film. The ndl in equivalent element circuits is related to the surface roughness of the film. This work shows an insight into the chemical effects of slurry pH in the CMP process of phase change materials through electrochemical means, which will benefit the development of a niche slurry for the integration of high density phase change memory devices.

1 August 2022 in ECS Journal of Solid State Science and Technology
Verified
Journal Article
Closed access
CLChengxing Li
Chengxing Li
DCDaolin Cai
Daolin Cai
WLWeili Liu
Weili Liu
WFWencheng Fang
Wencheng Fang
ZCZijing Cui
Zijing Cui
ZSZhitang Song
Zhitang Song
For improving the three-dimensional structure of phase-change memory devices, Ovonic threshold switch devices have received renewed attention as selectors owing to a simple production process, good scalability, and excellent performance. It can replace transistors and diodes in the available technology. In this article, we studied the GeSe-based chemical mechanical polishing process. The different concentrations of hydrogen peroxide and lysine interacting with GeSe in chemical mechanical polishing were investigated. Material characterization was performed by scanning electron microscopy and atomic force microscopy. In addition, the reaction mechanism in the chemical mechanical polishing process was analyzed by electrochemical experiments and X-ray photoelectron spectroscopy.