1 February 2022 in Materials Science in Semiconductor Processing
1 July 2021 in ECS Journal of Solid State Science and Technology
Titanium nitride (TiN) is preferred for use as the bottom electrode contact due to its excellent thermal stability and suitable electrical conductivity. We have studied the effect of using potassium permanganate (KMnO 4 ), L-Aspartic Acid (L-Asp) and alumina abrasives as slurry in chemical mechanical polishing (CMP) of TiN film. Different concentrations of potassium permanganate and different concentrations of L-aspartic acid additives were applied to the CMP of TiN. The results show that KMnO 4 and L-Asp can increase removal rate and improve the surface smoothness of TiN. The removal mechanism of TiN was analyzed by XPS and electrochemical tests, and the TiN film was characterized by atomic force microscope and scanning electron microscope.
31 August 2021 in Semiconductor Science and Technology
The blade bottom electrode contact (BEC) can significantly reduce the programming current of the phase change memory (PCM) and achieve low power consumption compared with the typical T-shaped PCM cell. The method of controlling the electrode width by controlling the thickness of the deposited layer can make the size break through the limit of photolithography. This paper proves that the RESET programming current and power consumption of the PCM decrease linearly with the decrease of the blade BEC width, and builds a theoretical model to verify it by simulating the distribution internal temperature field. Based on the above research, the cell life of PCM with different electrode widths was tested, and it was proved that the endurance of PCM increased with the decrease of the width of the blade electrode, caused by the lower power consumption of the narrower electrode.
1 August 2022 in ECS Journal of Solid State Science and Technology
For improving the three-dimensional structure of phase-change memory devices, Ovonic threshold switch devices have received renewed attention as selectors owing to a simple production process, good scalability, and excellent performance. It can replace transistors and diodes in the available technology. In this article, we studied the GeSe-based chemical mechanical polishing process. The different concentrations of hydrogen peroxide and lysine interacting with GeSe in chemical mechanical polishing were investigated. Material characterization was performed by scanning electron microscopy and atomic force microscopy. In addition, the reaction mechanism in the chemical mechanical polishing process was analyzed by electrochemical experiments and X-ray photoelectron spectroscopy.