Joseph Williams

Mr. Joseph Williams

orcid

Research Focus & Metrics

Academic Career Length

24Years (2003-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2006
Verified
Conference Paper
Closed access
PDF file
RERyan G. Edmonds
Ryan G. Edmonds
RSRobert C J Steele
Robert C J Steele
JWJoseph Williams
Joseph Williams
DSDouglas L. Straub
Douglas L. Straub
KCKent H. Casleton
Kent H. Casleton
ABAvtar Bining
Avtar Bining
An ultra lean-premixed Advanced Vortex Combustor (AVC) has been developed and tested. The natural gas fueled AVC was tested at the U.S. Department of Energy’s National Energy Technology Laboratory (USDOE NETL) test facility in Morgantown (WV). All testing was performed at elevated pressures and inlet temperatures and at lean fuel-air ratios representative of industrial gas turbines. The improved AVC design exhibited simultaneous NOx/CO/UHC emissions of 4/4/0 ppmv (all emissions are at 15% O2 dry). The design also achieved less than 3 ppmv NOx with combustion efficiencies in excess of 99.5%. The design demonstrated tremendous acoustic dynamic stability over a wide range of operating conditions which potentially makes this approach significantly more attractive than other lean premixed combustion approaches. In addition, a pressure drop of 1.75% was measured which is significantly lower than conventional gas turbine combustors. Potentially, this lower pressure drop characteristic of the AVC concept translates into overall gas turbine cycle efficiency improvements of up to one full percentage point. The relatively high velocities and low pressure drops achievable with this technology make the AVC approach an attractive alternative for syngas fuel applications.

22 July 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JWJoseph Williams
Joseph Williams
JFJon Francombe
Jon Francombe
DMDamian Murphy
Damian Murphy
Camera-based solutions can be a convenient means of collecting physiological measurements indicative of psychological responses to stimuli. However, the low illumination playback conditions commonly associated with viewing screen-based media oppose the bright conditions recommended for accurately recording physiological data with a camera. A study was designed to determine the feasibility of obtaining physiological data, for psychological insight, in illumination conditions representative of real world viewing experiences. In this study, a novel method was applied for testing a first-of-its-kind system for measuring both heart rate and facial actions from video footage recorded with a single discretely placed camera. Results suggest that conditions representative of a bright domestic setting should be maintained when using this technology, despite this being considered a sub-optimal playback condition. Further analyses highlight that even within this bright condition, both the camera-measured facial action and heart rate data contained characteristic errors. In future research, the influence of these performance issues on psychological insights may be mitigated by reducing the temporal resolution of the heart rate measurements and ignoring fast and low-intensity facial movements.

20 January 2003
Verified
Conference Paper
Closed access
CFC.B. Foltz
C.B. Foltz
JWJoseph Williams
Joseph Williams
SWS.C. West
S.C. West
DFD.G. Fabricant
D.G. Fabricant
HMH.M. Martin
H.M. Martin

16 August 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JWJoseph Williams
Joseph Williams
JFJon Francombe
Jon Francombe
DMDamian Murphy
Damian Murphy
Audio presentation is often attributed as being capable of influencing a viewer’s feeling of immersion during an audiovisual experience. However, there is limited empirical research supporting this claim. This study aimed to explore this effect by presenting a clip renowned for its immersive soundtrack to two groups of participants with either high-end or basic audio presentation. To measure immersion, a novel method is applied, which utilises a camera instead of an electroencephalogram (ECG) for acquiring a heart rate synchronisation feature. The results of the study showed no difference in the feature, or in the responses to an established immersion questionnaire, between the two groups of participants. However, the camera-sourced HR synchronicity feature correlated with the results of the immersion questionnaire. Moreover, the camera-sourced HR synchronicity feature was found to correlate with an equivalent feature sourced from synchronously recorded ECG data. Hence, this shows the viability of using a camera instead of an ECG sensor to quantify heart rate synchronisation but suggests that audio presentation alone is not capable of eliciting a measurable difference in the feeling of immersion in this context.

15 December 2020
Verified
Conference Paper
Closed access
RORicardo Ortiz
Ricardo Ortiz
WGWilliam Goble
William Goble
JWJoseph Williams
Joseph Williams
Long-term reflectivity and scattering data of MMT primary mirror (M1) coating from 2016 to the present suggest minimal optical degradation, resulting, in part, from periodic wet cleaning of the coating. This extended (approximately four-year) period of coating maintenance and accompanying optical sampling provides a more complete picture of M1 coating performance and of the contribution of periodic cleaning to that performance. Semi-annual, soap-and-water cleanings have helped maintain the coating’s optical quality. Techniques for cotton swab cleaning and for optical sampling of the aluminum coating with a Konica-Minolta CM-600d Spectrophotometer are discussed. These results imply that periodic, well-controlled cleaning has significantly extended the useful life of the 2016 MMT primary mirror coating. With the goal of maintaining a five to six year coating cycle.