Marica Falzarano

Marica Falzarano


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 March 2023 in Journal of Hazardous Materials
Verified
Journal Article
Open access
MBMaria Paola Bracciale
Maria Paola Bracciale
GGGiorgia De Gioannis
Giorgia De Gioannis
MFMarica Falzarano
Marica Falzarano
AMAldo Muntoni
Aldo Muntoni
APAlessandra Polettini
Alessandra Polettini
TZTatiana Zonfa
Tatiana Zonfa
In the present study commercial Polylactic Acid-based disposable cups and plates were selected for lab scale anaerobic degradability tests. The experiments were carried out under thermophilic conditions at different inoculum to substrate ratios and test material sizes, and the specific biogas production and associated kinetics were evaluated. Maximum biogas production was comparable for almost all the experimental runs (1620 and 1830 NmL/gTOCPLA) and a biodegradation degree in the range 86-100% was attained. Moreover, physical, chemical and microscopical analyses were used to characterize the tested materials before and after the degradation. The products composition was assessed and the presence of some additives (mainly Ca-based) was detected. Potential correlations among the process parameters and product composition were derived and a delay in process kinetics with increasing amount of additives embedded in the polymeric matrix was observed, confirming the relevant influence of the chemical blend on the biodegradation process.

9 March 2023 in Materials
Verified
Journal Article
Open access
PDF file
MFMarica Falzarano
Marica Falzarano
APAlessandra Polettini
Alessandra Polettini
Raffaella PomiRaffaella Pomi
Raffaella Pomi
ARAndreina Rossi
Andreina Rossi
TZTatiana Zonfa
Tatiana Zonfa
Bioplastics have entered everyday life as a potential sustainable substitute for commodity plastics. However, still further progress should be made to clarify their degradation behavior under controlled and uncontrolled conditions. The wide array of biopolymers and commercial blends available make predicting the biodegradation degree and kinetics quite a complex issue that requires specific knowledge of the multiple factors affecting the degradation process. This paper summarizes the main scientific literature on anaerobic digestion of biodegradable plastics through a general bibliographic analysis and a more detailed discussion of specific results from relevant experimental studies. The critical analysis of literature data initially included 275 scientific references, which were then screened for duplication/pertinence/relevance. The screened references were analyzed to derive some general features of the research profile, trends, and evolution in the field of anaerobic biodegradation of bioplastics. The second stage of the analysis involved extracting detailed results about bioplastic degradability under anaerobic conditions by screening analytical and performance data on biodegradation performance for different types of bioplastic products and different anaerobic biodegradation conditions, with a particular emphasis on the most recent data. A critical overview of existing biopolymers is presented, along with their properties and degradation mechanisms and the operating parameters influencing/enhancing the degradation process under anaerobic conditions.

19 June 2024 in Chemosphere
Verified
Journal Article
Open access
MFMarica Falzarano
Marica Falzarano
AMA. Marìn
A. Marìn
Luis Cabedo MasLuis Cabedo Mas
Luis Cabedo Mas
APAlessandra Polettini
Alessandra Polettini
RPR. Pomi
R. Pomi
TZTatiana Zonfa
Tatiana Zonfa
Four different end-of-life options for disposable bioplastic cups were investigated and compared based on their environmental implications. Two products with distinct polymeric composition were tested simulating the following scenarios at laboratory scale: i) industrial composting (180 days at 58 °C); ii) anaerobic digestion followed by industrial composting (45 days at 55 °C and 180 days at 58 °C); iii) anaerobic digestion followed by direct digestate use on soil for agricultural purposes (45 days at 55 °C and 180 days at 25 °C); iv) uncontrolled release into a soil environment (180 days at 25 °C). Ecotoxicity tests were run at the end of each experiment to investigate the effects of the materials on three main groups of terrestrial model organisms: plants, earthworms and nitrifying bacteria. Complete biodegradation of the cups was observed in 180 days in the scenarios involving composting environment. A low degree of biodegradation (22.9 ± 4.5%) of the digestates in soil was observed, warning for a potential micro-bioplastics discharge into the environment. No degradation was observed for the cups in soil during the same testing period. Ecotoxicity tests revealed a negative effect on plants biomass growth across all samples, which was 17-30% lower compared to the blank sample. The experimental campaign highlighted the need for a systematic assessment of controlled treatment of bioplastics, as well as the need for a harmonized legislative framework.

10 August 2023 in Fuel
Verified
Journal Article
Open access
MBMaria Paola Bracciale
Maria Paola Bracciale
GGGiorgia De Gioannis
Giorgia De Gioannis
MFMarica Falzarano
Marica Falzarano
AMAldo Muntoni
Aldo Muntoni
APAlessandra Polettini
Alessandra Polettini
TZTatiana Zonfa
Tatiana Zonfa

21 March 2023 in Fermentation
Verified
Journal Article
Open access
PDF file
TZTatiana Zonfa
Tatiana Zonfa
TKTheofilos Kamperidis
Theofilos Kamperidis
MFMarica Falzarano
Marica Falzarano
Gerasimos LyberatosGerasimos Lyberatos
Gerasimos Lyberatos
APAlessandra Polettini
Alessandra Polettini
Asimina TremouliAsimina Tremouli
Asimina Tremouli
The present work investigates a two-stage process scheme for cheese whey valorization through energy recovery in different forms by means of bio-electrochemical systems. The first stage consisted of an integrated bio-electrochemical process for H2 and electricity production. This combined dark fermentation with an electrochemical system with the aim of overcoming the typical thermodynamic/biochemical limitations of fermentation and enhancing H2 recovery. The second treatment stage involved a single-chamber microbial fuel cell, featuring an innovative configuration consisting of four air cathodes with fly ash as the oxygen reduction catalyst. The bio-electrochemical process performed in the first stage achieved promising results, displaying a three-times higher H2 production yield compared to conventional dark fermentation. In addition, the experiments using the MFC in the second stage were found to successfully exploit the effluent from the first stage, with COD removal yields of 86% ± 8% and energy recovery with a maximum current output of 1.6 mA and a maximum power density of 1.2 W/m3.

6 March 2025 in Materials
Verified
Journal Article
Open access
PDF file
MFMarica Falzarano
Marica Falzarano
APAlessandra Polettini
Alessandra Polettini
Raffaella PomiRaffaella Pomi
Raffaella Pomi
ARAndreina Rossi
Andreina Rossi
TZTatiana Zonfa
Tatiana Zonfa
Jacopo TirillòJacopo Tirillò
Jacopo Tirillò
The viability of anaerobic degradation treatment as an end-of-life option for commercial disposable bioplastic tableware, typically certified as compostable, was assessed. Two types of polylactic acid-based items were selected and tested under mesophilic conditions (38 °C) for 155 days, until reaching a plateau. Advanced chemical characterization of the products was performed with a combination of analytical techniques, i.e., microscopy, spectroscopy, and thermogravimetry. Two methods for calculating the biodegradation degree of the products were discussed and compared, using the biogas generated in the test and the total organic carbon (TOC) removal, respectively. The method based on TOC removal, resulting in a biodegradation degree ranging from 80.5% to 88.9%, was considered to more accurately describe the process. Given the complexity of assessing the biodegradation of a bioplastic product, an effort was made to derive correlations among the chemical–physical composition of the product, the biodegradation conditions, and the biodegradation yields/kinetics, with an aim to describe the process comprehensively. Statistical tools were also applied to derive additional considerations regarding the influence of the polymeric blend and digestion parameters on the biodegradation of bioplastic products. The identified data clusters, which were found to be grouped by the digestion temperature and the type of bioplastic, indicated specific biodegradation features of the investigated materials.