This research designed an energy management system involving a battery-supercapacitor Hybrid Energy Storage System (HESS) for electric vehicles (EV). The objective is to improve the performance of the HESS by combining battery and supercapacitor features, accounting for topographical information to guarantee continuous hybridization during the drive cycle. Contour Positioning System (CPS) was used to determine the slope of the rode travelled by the vehicle. Two adaptive algorithms were designed for a rule-based controller to control the energy shared between the battery and the supercapacitor; an optimal adaptive controller and fuzzy adaptive controller. The HESS model, electric vehicle and controllers were tested using MATLAB/Simulink with three real drive cycles, namely, uphill, downhill and city tour, in three different speeds 50Km/h, 60Km/h and 70 Km/h. The results proved the controllers managed to extend battery life-cycle by reducing the stress on the battery for the drive cycles. The results were compared in terms of energy consumption for the optimal adaptive rule-based controller and fuzzy adaptive rule-based controller. The optimal adaptive rule-based controller guaranteed the HESS was able to operate continuously and extend the number of drive cycles in a wide range of speeds and road slopes.
The energy storage system (ESS) plays a crucial role in electric vehicles (EVs), impacting their performance and efficiency. While batteries are the standard choice for energy storage, they come with drawbacks like low power density and limited life cycles, which can hinder pure battery electric vehicles (PBEVs). To address these issues, a hybrid energy storage system (HESS) that combines a battery with a supercapacitor provides a more effective solution. The battery delivers consistent power, while the supercapacitor manages peak power demands and regenerative braking energy. This study proposes a new energy management strategy for the HESS, an advanced adaptive rule-based algorithm. The results of the standard rule-based and adaptive rule-based algorithms are used to verify the proposed control algorithm. The system was modeled in MATLAB/Simulink and evaluated across three driving cycles—UDDS, NYCC, and Japan1015—while varying states of charge for the supercapacitors. The findings indicate that the HESS significantly alleviates battery stress compared to a pure battery system, enhancing both efficiency and lifespan. Among the algorithms tested, the advanced adaptive rule-based algorithm yielded the best results, increasing the number of viable drive cycles.
This paper proposes a neural-network-based framework using Convolutional Neural Network and Long-Short Term Memory (CNN-LSTM) for detecting faults and recovering signals from Hall sensors in brushless DC motors. Hall sensors are critical components in determining the position and speed of motors, and faults in these sensors can disrupt their normal operation. Traditional fault-diagnosis methods, such as state-sensitive and transition-sensitive approaches, and fault-recovery methods, such as vector tracking observer, have been widely used in the industry but can be inflexible when applied to different models. The proposed fault diagnosis using the CNN-LSTM model was trained on the signal sequences of Hall sensors and can effectively distinguish between normal and faulty signals, achieving an accuracy of the fault-diagnosis system of around 99.3% for identifying the type of fault. Additionally, the proposed fault recovery using the CNN-LSTM model was trained on the signal sequences of Hall sensors and the output of the fault-detection system, achieving an efficiency of determining the position of the phase in the sequence of the Hall sensor signal at around 97%. This work has three main contributions: (1) a CNN-LSTM neural network structure is proposed to be implemented in both the fault-diagnosis and fault-recovery systems for efficient learning and feature extraction from the Hall sensor data. (2) The proposed fault-diagnosis system is equipped with a sensitive and accurate fault-diagnosis system that can achieve an accuracy exceeding 98%. (3) The proposed fault-recovery system is capable of recovering the position in the sequence states of the Hall sensors, achieving an accuracy of 95% or higher.
Three-phase motors find extensive applications in various industries. Open-circuit faults are a common occurrence in inverters, and the open-circuit fault diagnosis system plays a crucial role in identifying and addressing these faults to enhance the safety of motor operations. Nevertheless, the current open-circuit fault diagnosis system faces challenges in precisely detecting specific faulty switches. The proposed work presents a neural network-based open-circuit fault diagnosis system for identifying faulty power switches in inverter-driven motor systems. The system leverages trained phase-to-phase voltage data from the motor to recognize the type and location of faults in each phase with high accuracy. Employing separate neural networks for each of the three phases in a three-phase permanent magnet synchronous motor, the system achieves an outstanding overall fault detection accuracy of approximately 99.8%, with CNN and CNN-LSTM architectures demonstrating superior performance. This work makes two key contributions: (1) implementing neural networks to significantly improve the accuracy of locating faulty switches in open-circuit fault scenarios, and (2) identifying the optimal neural network architecture for effective fault diagnosis within the proposed system.
6 December 2013 in Applied Mechanics and Materials
The conventional distance estimation system only uses a constant speed and a constant level of road elevation to estimate the driving mileage for a vehicle. This technique leads to a low accuracy. In the current project, a new estimation technique namely; the Contour Positioning System (CPS) for an electric vehicle has been proposed. The CPS has a better estimation on the electric vehicle battery usage because of the consideration of road elevation, regenerative energy etc. In order to perform the CPS calculation, the elevation profile of the selected destination must be known. In this paper, the technique to extract the elevation profile i.e. latitude, longitude and altitude has been performed and evaluated using Google Maps or Google EarthÒ. This method enables the user to obtain the road information and compute the amount of energy needed to reach the said destination.