QAZWAN ABDULLAH TARBOSH

Mr. QAZWAN ABDULLAH TARBOSH

was born in Taiz, Yemen and received his bachelor’s degree of Electrical and electronic engineering from Universiti Tan Hussein Onn Malaysia (UTHM) in 2013. Also received his Master of Science in Electrical and Electronic Engineering in 2015 from the same
+1
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 March 2021 in IEEE Access
Verified
Journal Article
Open access
Adeb Ali Mohammed SalhAdeb Ali Mohammed Salh
Adeb Ali Mohammed Salh
LALukman Audah
Lukman Audah
Nor Shahida Mohd ShahNor Shahida Mohd Shah
Nor Shahida Mohd Shah
Abdulraqeb AlhammadiAbdulraqeb Alhammadi
Abdulraqeb Alhammadi
QAZWAN ABDULLAH TARBOSHQAZWAN ABDULLAH TARBOSH
QAZWAN ABDULLAH TARBOSH
AAAkram A Almohammadi
Akram A Almohammadi
The sixth generation (6G) wireless communication network presents itself as a promising technique that can be utilized to provide a fully data-driven network evaluating and optimizing the end-to-end behavior and big volumes of a real-time network within a data rate of Tb/s. In addition, 6G adopts an average of 1000+ massive number of connections per person in one decade (2030 virtually instantaneously). The data-driven network is a novel service paradigm that offers a new application for the future of 6G wireless communication and network architecture. It enables ultra-reliable and low latency communication (URLLC) enhancing information transmission up to around 1 Tb/s data rate while achieving a 0.1 millisecond transmission latency. The main limitation of this technique is the computational power available for distributing with big data and greatly designed artificial neural networks. The work carried out in this paper aims to highlight improvements to the multi-level architecture by enabling artificial intelligence (AI) in URLLC providing a new technique in designing wireless networks. This is done through the application of learning, predicting, and decision-making to manage the stream of individuals trained by big data. The secondary aim of this research paper is to improve a multi-level architecture. This enables user level for device intelligence, cell level for edge intelligence, and cloud intelligence for URLLC. The improvement mainly depends on using the training process in unsupervised learning by developing data-driven resource management. In addition, improving a multi-level architecture for URLLC through deep learning (DL) would facilitate the creation of a data-driven AI system, 6G networks for intelligent devices, and technologies based on an effective learning capability. These investigational problems are essential in addressing the requirements in the creation of future smart networks. Moreover, this work provides further ideas on several research gaps between DL and 6G that are up-to-date unknown.

28 February 2020 in IEEE Access
Verified
Journal Article
Open access
QAZWAN ABDULLAH TARBOSHQAZWAN ABDULLAH TARBOSH
QAZWAN ABDULLAH TARBOSH
ÖAÖmer Aydoğdu
Ömer Aydoğdu
NFNabil Farah
Nabil Farah
HTHairul Nizam Talib
Hairul Nizam Talib
Adeb Ali Mohammed SalhAdeb Ali Mohammed Salh
Adeb Ali Mohammed Salh
Akif DurduAkif Durdu
Akif Durdu
The use of Fuzzy Logic Controller (FLC) as speed controller for Induction Motor (IM) drives is garnering strong researchers’ interest since it has proven to achieve superior performance compared to conventional controllers. The aim of this study is to review and investigate the design, operations, and effects of rules reduction for FLC in IM drives. Based on the literature, the most commonly used technique to design FLC Membership Functions (MFs) rule-base and control model is based on engineering skills and experienced behavioral aspects of the controlled system. Simplified fuzzy rules approaches have been introduced to reduce the number of fuzzy rules in order to realize hardware implementation. This study discusses different simplified rules methods applied to IM drives. Most of the proposed methods shared a common drawback in that they lacked systematic procedures for designing FLC rule base. Therefore, this research proposed a methodological approach to designing and simplifying the FLC rule-base for IM drives based on dynamic step response and phase plane trajectory of the second order representation of IM drives systems. The proposed method presents guidance for designing FLC rule-base based on general dynamic step response of the controlled system. Following the proposed method procedures, a (9, 25, 49) rules size has been designed and simplified to a (5, 7, 9) rules size. The effectiveness and accuracy of the designed rules as well as the simplified rules were verified by conducting simulation analysis of IM drives using MATLAB/Simulink environment. Step speed command performance comparisons were achieved with both standard designed and simplified rules at various speed demands. The simulation results showed that the simplified rules maintain the drive performance and produced similar behavior as the standard designed rules.

26 November 2020 in IEEE Access
Verified
Journal Article
Open access
TSTaha Sadeq
Taha Sadeq
CKChew Kuewwai
Chew Kuewwai
EMEzra Morris
Ezra Morris
QAZWAN ABDULLAH TARBOSHQAZWAN ABDULLAH TARBOSH
QAZWAN ABDULLAH TARBOSH
ÖAÖmer Aydoğdu
Ömer Aydoğdu
This research designed an energy management system involving a battery-supercapacitor Hybrid Energy Storage System (HESS) for electric vehicles (EV). The objective is to improve the performance of the HESS by combining battery and supercapacitor features, accounting for topographical information to guarantee continuous hybridization during the drive cycle. Contour Positioning System (CPS) was used to determine the slope of the rode travelled by the vehicle. Two adaptive algorithms were designed for a rule-based controller to control the energy shared between the battery and the supercapacitor; an optimal adaptive controller and fuzzy adaptive controller. The HESS model, electric vehicle and controllers were tested using MATLAB/Simulink with three real drive cycles, namely, uphill, downhill and city tour, in three different speeds 50Km/h, 60Km/h and 70 Km/h. The results proved the controllers managed to extend battery life-cycle by reducing the stress on the battery for the drive cycles. The results were compared in terms of energy consumption for the optimal adaptive rule-based controller and fuzzy adaptive rule-based controller. The optimal adaptive rule-based controller guaranteed the HESS was able to operate continuously and extend the number of drive cycles in a wide range of speeds and road slopes.

25 May 2021 in IEEE Access
Verified
Journal Article
Open access
Abdu Ahmed SaifAbdu Ahmed Saif
Abdu Ahmed Saif
KDKaharudin Dimyati
Kaharudin Dimyati
Kamarul Ariffin NoordinKamarul Ariffin Noordin
Kamarul Ariffin Noordin
Deepak GCDeepak GC
Deepak GC
Nor Shahida Mohd ShahNor Shahida Mohd Shah
Nor Shahida Mohd Shah
MMMahathir Mohamad
Mahathir Mohamad
The energy consumption and coverage range of unmanned aerial vehicles (UAVs) are major challenges in UAV-based postdisaster communications. To address these challenges, energy harvesting is employed to power communication devices and prolong the lifetime of the wireless communication network during a disaster. In addition, clustering techniques and device-to-device (D2D) communication are needed to increase the overall network coverage and provide sustainable connectivity during the disaster and postdisaster phases. We have proposed a novel emergency communication system (ECS) using the optimal cluster head (CH) technique to improve the energy transfer efficiency for sustainable network connectivity. We have developed a UAV deployment model assisted by the clustering technique and D2D links that is capable of harvesting energy to increase the network lifetime. This new approach is expected to enhance the reliability of the network in disaster situations. The proposed methods have been evaluated by measuring the energy efficiency performance and the network outage probability. The simulation results demonstrate improved performance with the deployment of optimal CHs, while the outage probability has been effectively reduced. Moreover, the proposed approach has been proven to reduce the computational complexity. In conclusion, UAV deployment with the optimal CH algorithm is a suitable network design to recover from natural disasters and potentially save many lives.

10 December 2019 in IEEE Access
Verified
Journal Article
Open access
Adeb Ali Mohammed SalhAdeb Ali Mohammed Salh
Adeb Ali Mohammed Salh
Nor Shahida Mohd ShahNor Shahida Mohd Shah
Nor Shahida Mohd Shah
LALukman Audah
Lukman Audah
QAZWAN ABDULLAH TARBOSHQAZWAN ABDULLAH TARBOSH
QAZWAN ABDULLAH TARBOSH
Waheb A. JabbarWaheb A. Jabbar
Waheb A. Jabbar
MMMahathir Mohamad
Mahathir Mohamad

25 April 2022 in IEEE Access
Verified
Journal Article
Open access
ASAdeeb Salh
Adeeb Salh
LALukman Audah
Lukman Audah
MAMohammed Alhartomi
Mohammed Alhartomi
KKKwang Soon Kim
Kwang Soon Kim
SASaeed Alsamhi
Saeed Alsamhi
HAhaneen algethami
haneen algethami
The convergence of Artificial Intelligence (AI) can overcome the complexity of network defects and support a sustainable and green system. AI has been used in the Cognitive Internet of Things (CIoT), improving a large volume of data, minimizing energy consumption, managing traffic, and storing data. However, improving smart packet transmission scheduling (TS) in CIoT is dependent on choosing an optimum channel with a minimum estimated Packet Error Rate (PER), packet delays caused by channel errors, and the subsequent retransmissions. Therefore, we propose a Generative Adversarial Network and Deep Distribution Q Network (GAN-DDQN) to enhance smart packet TS by reducing the distance between the estimated and target action-value particles. Furthermore, GAN-DDQN training based on reward clipping is used to evaluate the value of each action for certain states to avoid large variations in the target action value. The simulation results show that the proposed GAN-DDQN increases throughput and transmission packet while reducing power consumption and Transmission Delay (TD) when compared to fuzzy Radial Basis Function (fuzzy-RBF) and Distributional Q-Network (DQN). Furthermore, GAN-DDQN provides a high rate of 38 Mbps, compared to actor-critic fuzzy-RBF’s rate of 30 Mbps and the DQN algorithm’s rate of 19 Mbps.