Sliding mode control is widely used to enhance the speed control performance of permanent magnet synchronous motors (PMSM). However, the slow reaching onto the sliding surface and chatting phenomena of conventional sliding mode reaching law (SMRL) is still a challenging issue. This article proposes a novel adaptive SMRL (ASMRL) to solve these problems. This ASMRL includes the system state variables, an exponential function term bounded by the absolute value of the switching function, and an adaptive switching gain term influenced by the convergence of the system state. This approach efficiently accelerates the velocity at which the system state reaches the sliding mode surface and effectively suppresses chattering. Then an enhanced sliding mode controller is designed for the speed regulation of PMSM systems. Finally, mathematical stability analysis, numerical analysis, simulation, and experimental validation are conducted to demonstrate the effectiveness of the proposed method.
11 February 2022 in IEEE Transactions on Power Electronics
A dc-excited Vernier reluctance machine (DC-VRM) using a 12-slot/10-pole-pair design exhibits the advantages of small torque ripple and a robust structure, which has good potential to be applied as an aerospace integrated starter/generator. By eliminating vulnerable position sensors, system reliability can be further improved by sensorless startup. However, driven by the traditional three-phase inverter, the phase inductance of the 12/10 DC-VRM becomes constant due to its complementary characteristic, which means the saliency effect in DC-VRM is obliterated, and thereby a sensorless operation using self-inductance detection cannot be applied. To release the machine saliency effect and further improve sensorless drive performance, a dual-inverter sensorless drive structure is introduced to reconstruct the machine saliency by using separated dual three-phase inverters. The released series inductance model with mutual inductance coupling is established through a piecewise function, and an accurate position estimation method without finite-element analysis or complex measurements is introduced. Moreover, by further analyzing the linearity of series inductance, the full-cycle inductance high-linearity range is composed of dual-inverter complementary features, and thus position estimation accuracy can be guaranteed. Through this feature, a predictive-position-based pulse injection sensorless drive method is proposed to improve acceleration performance with detection time reduction. Based on the predictive position, the detection pulses are only injected into one inverter whose corresponding phases are located at the inductance high-linearity range, thus decreasing the detection time and improving acceleration performance.
21 June 2023 in IEEE Transactions on Power Electronics
Model predictive torque control (MPTC) is highly regarded for its simple structure, rapid dynamic response, and optimized control performance when applied to actual motor driving systems. However, conventional MPTC techniques often lead to undesirable effects in three-phase inverter-based surface-mounted permanent magnet synchronous motors (SPMSMs), such as high electromagnetic torque, stator flux ripples, and significant current harmonic distortion. Notably, the generalized MPTC approach generates a substantial common mode voltage (CMV) that can cause damage to the motor bearing and winding insulation in SPMSMs. To address these issues, this article proposes a three-stage duty cycle-based deadbeat predictive torque control (DCDPTC) technique for SPMSMs. The proposed technique leverages the volt-second equilibrium theorem by aligning the duty cycles with the predicted electromagnetic torque, stator flux, and their respective target values while accounting for extreme cases, accordingly, electromagnetic torque and stator flux ripples as well as the total harmonic distortion (THD) of the stator current are minimized. In order to improve the system robustness, the duty cycle is limited to avoid the overmodulation. Furthermore, optimized switching sequences are meticulously arranged to ensure the CMV is lowered and the minimum number of switching transitions is maintained while utilizing a fixed switching frequency. The proposed technique is simplified. Its resultant performance is validated by experimental results.
13 June 2022 in IEEE Transactions on Power Electronics
Multiphase dc-excited Vernier reluctance machine (DC-VRM) exhibits the merits of robust structure, small torque ripple, and good fault-tolerant ability. Developing advanced sensorless drive methods can further promote its application in the safety-critical system. In this article, pulse injection sensorless drive methods are optimized in a six-phase DC-VRM parallel H-bridge drive system to strengthen their acceleration performance and fault-tolerant ability. The acceleration performance studied in this article corresponds to the acceleration speed during the startup stage. By the full-phase alternative pulse injection method (APIM), each phase can be excited independently to avoid mutual-inductance influence on position estimation, but this method suffers from a long communication delay and relatively poor acceleration performance. A reduced-phase APIM can reduce detection time, but the lack of detected phase may influence position estimation accuracy and fault-tolerant ability. To solve these problems, a novel vertical-axis synchronous pulse injection method is proposed and compared with previous methods in this article. The key is to inject detection pulses into vertical-axis phases simultaneously, thus reducing the detection time and improving the torque generation. It is proved that the influence of mutual inductance on position estimation can be ignored, and the detection accuracy and acceleration performance can be improved without deterioration of fault-tolerant ability.
14 April 2022 in IEEE Transactions on Energy Conversion
DC-Excited vernier reluctance machine (DC-VRM) using a 12-slot/10-pole-pair design, exhibits the advantages of small torque ripple and low cogging torque due to the inherent commentary characteristic. However, the inherent saliency is canceled out by a 12/10 pole combination of machine design driven by a traditional three-phase inverter. As a result, the sensorless operation in zero/low-speed regions becomes difficult because the position estimation methods using self-inductance detection cannot be applied. To tackle this problem, we first analyzed the saliency annihilation phenomenon through Fourier analysis that the odd-order harmonics in self-inductance are canceled. Moreover, reconstructing saliency method is proposed by splitting a phase winding into two sub-phase coils and using parallel H-bridge converters to supply sub-phase coils and achieve sensorless drive. Through this method, the saliency effect is recovered in self-inductance, thereby pulse injection sensorless drive can be applied. The constructed 12/10 DC-VRM sensorless drive shows good fault-tolerant ability and can be applied in safety-critical industry applications such as aerospace propulsion. Analysis and experiments are performed in the initial position detection, start-up and free-running stages to verify the feasibility of the proposed solution. A sector estimation accurate to 6° can be achieved.
27 October 2022 in IEEE Transactions on Power Electronics
This letter presents a novel mutual inductance detection method by integrating sensing coil function into field winding for the initial position estimation of nonsalient DC-excited vernier reluctance machines (DC-VRM). The key is to reutilize the field winding as a sensing coil by operating the power transistor states, and then the induced currents can be detected from the closed sensing coil when detection pulses are injected into the armature windings. Combined with the established mutual inductance model, reliable position estimation is easily achieved without additional detection circuits. The proposed method has good potential to be applied to a group of nonsalient machines with independent field and armature windings.