The operational modal analysis methods based on output-only measurements are well-known and applied in linear systems. However, they are not so well developed for nonlinear systems. Thus, this paper proposes an approach for nonlinear system identification using output-only data. In the conventional Volterra series, the outputs of the system are computed by multiple convolutions between the excitation force and the Volterra kernels. However, in this paper at least two time series measured in different placements are used to compute the multiple convolutions and the excitation signals are not required. The novel kernels identified can be used to characterize nonlinear behavior through a model using only output data. A numerical example based on a Duffing oscillator with two degrees-of-freedom (2DOF) and experimental vibration data from a buckled beam with hardening nonlinearities are used to illustrate the proposed method. The prediction results using output-only data are similar to the conventional Volterra kernels based on input and output data.
The frequency range of the leak noise in buried water pipes, measured using acoustic correlators, depends significantly on the type of pipe and its location as well as the type of sensors used. Having a rough idea of this frequency range can be beneficial for operators prior to conducting tests; however, there is currently no method of predicting it except through practical experience, and no model-based approach yet exists. This issue is addressed in the present paper by using a concise and relatively simple analytical model of the water-pipe–soil system combined with the sensors’ frequency response. The influence of the various physical parameters of the system, such as the pipe and soil properties and the sensor type, on the cross-power spectral density (CPSD) of leak noise signals and, furthermore, the frequency range are investigated. The main factors that affect the bandwidth are the distance between the sensors, wave speed of the predominantly fluid-borne wave in the pipe and the attenuation of this wave. It is shown that the external medium has a profound effect on the propagation and, in turn, on the bandwidth. The approach to predicting this bandwidth is validated using experimental data from three different test sites.