This work demonstrates that, despite the existence of a significant number of works on PLA crystallization, there is still a relatively simple way, different from those already described, in which its complex kinetics can be observed. The X-ray diffraction (XRD) results presented here confirm that the PLLA under study crystallizes mostly in the α and α′ forms. An interesting observation is that at any temperature in the studied range of the patterns, the X-ray reflections stabilize with a given shape and at a given angle, different for each temperature. That means that both α and α′ forms coexist and are stable at the same temperatures so that the shape of each pattern results from both structures. However, the patterns obtained at each temperature are different because the predominance of one crystal form over the other depends on temperature. Thus, a two-component kinetic model is proposed to account for both crystal forms. The method involves the deconvolution of the exothermic DSC peaks using two logistic derivative functions. The existence of the rigid amorphous fraction (RAF) in addition to the two crystal forms increases the complexity of the whole crystallization process. However, the results presented here show that a two-component kinetic model can reproduce the overall crystallization process fairly well over a broad range of temperatures. The method used here for PLLA may be useful for describing the isothermal crystallization processes of other polymers.
Hydrodynamic coefficients determine the behavior of all simulated underwater vehicles. Therefore, it is essential to precisely define their values when aiming to replicate a real vehicle. Generally established procedures for obtaining them tend to have limitations, especially in transient responses. To address these issues, this paper proposes a comprehensive methodology for obtaining the hydrodynamic coefficients of an underwater vehicle. The main novelty is the combination of empirical measurements as a first step and evolutionary algorithms as a final step for optimizing the coefficients. The proposed methodology is described and applied to a commercially available remotely operated vehicle (ROV) BlueROV2, followed by analyzing the results in detail and including several tests that compare it to the real vehicle to validate its adequacy.