Díaz-Díaz Ana-María

Dr. Díaz-Díaz Ana-María

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 July 2021 in Processes
Verified
Journal Article
Open access
PDF file
JLJorge López-Beceiro
Jorge López-Beceiro
DADíaz-Díaz Ana-María
Díaz-Díaz Ana-María
AGAna Álvarez García
Ana Álvarez García
JTJavier Tarrío-Saavedra
Javier Tarrío-Saavedra
SFSalvador Naya Fernández
Salvador Naya Fernández
RARamón Pedro Artiaga
Ramón Pedro Artiaga
Thermal degradation of lignin in nitrogen atmosphere is evaluated by linear heating and isothermal tests. While linear heating suggests that thermal decomposition in the 200–400 °C range mainly consists of a single step, a careful analysis of isothermal tests points to different lignin fractions having different stabilities. This is an important point for practical predictions, since kinetics obtained as if the degradations at different temperatures were the same would lack practical utility. Instead, stairway type tests are proposed to evaluate the degradation rates and sample quantities involved at the temperatures of interest.

Verified
Journal Article
Open access
PDF file
CCCarolina Camba
Carolina Camba
JMJose L. Mier
Jose L. Mier
Luis CarralLuis Carral
Luis Carral
María Isabel Lamas GaldoMaría Isabel Lamas Galdo
María Isabel Lamas Galdo
JÁJosé-Carlos Álvarez-Feal
José-Carlos Álvarez-Feal
JTJavier Tarrío-Saavedra
Javier Tarrío-Saavedra
This work proposes a green material for artificial reefs to be placed in Galicia (northwest Spain) taking into account the principles of circular economy and sustainability of the ecosystem. New concrete formulations for marine applications, based on cement and/or sand replacement by mussel shells, are analyzed in terms of resistance to abrasion. The interest lies in the importance of the canning industry of Galicia, which generates important quantities of shell residues with negative environmental consequences. Currently, the tests to determine the abrasion erosion resistance of concrete on hydraulic structures involve large and complex devices. According to this, an experimental test has been proposed to estimate and compare the wear resistance of these concretes and, consequently, to analyze the environmental performance of these structures. First, a numerical analysis validated with experimental data was conducted to design the test. Subsequently, experimental tests were performed using a slurry tank in which samples with conventional cement and sand were partially replaced by mussel shell. The abrasive erosion effect of concrete components was analyzed by monitoring the mass loss. It shows an asymptotic trend with respect to time that has been modeled by Generalized Additive Model (GAM) and nonlinear regression models. The results were compared to concrete containing only conventional cement and sand. Replacing sand and/or cement by different proportions of mussel shells has not significantly reduced the resistance of concrete against erosive degradation, except for the case where a high amount of sand (20 wt.%) is replaced. Its resistance against the erosive abrasion is increased, losing between 0.1072 and 0.0310 wt.% lower than common concrete. In all the remaining cases (replacements of the 5–10 wt.% of sand and cement), the effect of mussel replacement on erosive degradation is not significant. These results encourage the use of mussel shells in the composition of concrete, taking into account that we obtain the same degradation properties, even more so considering an important residue in the canning industry (and part of the seabed) that can be valorized.

14 April 2023 in Polymers
Verified
Journal Article
Open access
PDF file
JLJorge López-Beceiro
Jorge López-Beceiro
DADíaz-Díaz Ana-María
Díaz-Díaz Ana-María
EPEnrique Fernández Pérez
Enrique Fernández Pérez
IFIgnatius Ferreira
Ignatius Ferreira
WFWalter W. Focke
Walter W. Focke
RARamón Pedro Artiaga
Ramón Pedro Artiaga
This work demonstrates that, despite the existence of a significant number of works on PLA crystallization, there is still a relatively simple way, different from those already described, in which its complex kinetics can be observed. The X-ray diffraction (XRD) results presented here confirm that the PLLA under study crystallizes mostly in the α and α′ forms. An interesting observation is that at any temperature in the studied range of the patterns, the X-ray reflections stabilize with a given shape and at a given angle, different for each temperature. That means that both α and α′ forms coexist and are stable at the same temperatures so that the shape of each pattern results from both structures. However, the patterns obtained at each temperature are different because the predominance of one crystal form over the other depends on temperature. Thus, a two-component kinetic model is proposed to account for both crystal forms. The method involves the deconvolution of the exothermic DSC peaks using two logistic derivative functions. The existence of the rigid amorphous fraction (RAF) in addition to the two crystal forms increases the complexity of the whole crystallization process. However, the results presented here show that a two-component kinetic model can reproduce the overall crystallization process fairly well over a broad range of temperatures. The method used here for PLLA may be useful for describing the isothermal crystallization processes of other polymers.

28 September 2021 in Molecules
Verified
Journal Article
Open access
PDF file
AMAntonio Benjamim Mapossa
Antonio Benjamim Mapossa
JLJorge López-Beceiro
Jorge López-Beceiro
DADíaz-Díaz Ana-María
Díaz-Díaz Ana-María
RARamón Pedro Artiaga
Ramón Pedro Artiaga
DMDennis Simbarashe Moyo
Dennis Simbarashe Moyo
WFWalter W. Focke
Walter W. Focke
Poly(lactic acid) (PLA) is an attractive candidate for replacing petrochemical polymers because it is fully biodegradable. This study investigated the potential of PLA as a sustainable and environmentally friendly alternative material that can be developed into commercially viable wearable mosquito repellent devices with desirable characteristics. PLA strands containing DEET and IR3535 were prepared by twin screw extrusion compounding and simultaneously functioned as plasticizers for the polymer. The plasticizing effect was investigated by thermal and rheological studies. DSC studies showed that the addition of DEET and IR3535 into PLA strands reduced the glass transition temperature consistent with predictions of the Fox equation, thus proving their efficiency as plasticizers. The rheology of molten samples of neat PLA and PLA/repellents blends, evaluated at 200 °C, was consistent with shear-thinning pseudoplastic behaviour. Raman studies revealed a nonlinear concentration gradient for DEET in the PLA strand, indicating non-Fickian Type II transport controlling the desorption process. Release data obtained at 50 °C showed initial rapid release followed by a slower, near constant rate at longer times. The release rate data were fitted to a novel modification of the Peppas-Sahlin desorption model.

20 March 2021 in Processes
Verified
Journal Article
Open access
PDF file
JLJorge López-Beceiro
Jorge López-Beceiro
DADíaz-Díaz Ana-María
Díaz-Díaz Ana-María
AGAna Álvarez García
Ana Álvarez García
JTJavier Tarrío-Saavedra
Javier Tarrío-Saavedra
SFSalvador Naya Fernández
Salvador Naya Fernández
RARamón Pedro Artiaga
Ramón Pedro Artiaga
A kinetic model is proposed to fit isothermal thermogravimetric data obtained from cellulose in an inert atmosphere at different temperatures. The method used here to evaluate the model involves two steps: (1) fitting of single time-derivative thermogravimetric curves (DTG) obtained at different temperatures versus time, and (2) fitting of the rate parameter values obtained at different temperatures versus temperature. The first step makes use of derivative of logistic functions. For the second step, the dependence of the rate factor on temperature is evaluated. That separation of the curve fitting from the analysis of the rate factor resulted to be very flexible since it proved to work for previous crystallization studies and now for thermal degradation of cellulose.