Post-transfer annealing affects optical properties of monolayer WS 2 /Ge(100) 2D/3D heterostructures. Stronger van der Waals interactions change the electronic band structure of WS 2 , narrowing its gap and largely quenching the photoluminescence.
12 June 2024 in Journal of Vacuum Science & Technology B
We experimentally demonstrate a low-cost transfer process of GeSn ribbons to insulating substrates for short-wave infrared (SWIR) sensing/imaging applications. By releasing the original compressive GeSn layer to nearly fully relaxed state GeSn ribbons, the room-temperature spectral response of the photodetector is further extended to 3.2 μm, which can cover the entire SWIR range. Compared with the as-grown GeSn reference photodetectors, the fabricated GeSn ribbon photodetectors have a fivefold improvement in the light-to-dark current ratio, which can improve the detectivity for high-performance photodetection. The transient performance of a GeSn ribbon photodetector is investigated with a rise time of about 40 μs, which exceeds the response time of most GeSn (Ge)-related devices. In addition, this transfer process can be applied on various substrates, making it a versatile technology that can be used for various applications ranging from optoelectronics to large-area electronics. These results provide insightful guidance for the development of low-cost and high-speed SWIR photodetectors based on Sn-containing group IV low-dimensional structures.
The rapid expansion of the applications of infrared (IR) sensing in the commercial market has driven the need to develop new materials and detector designs for enhanced performance. In this work, we describe the design of a microbolometer that uses two cavities to suspend two layers (sensing and absorber). Here, we implemented the finite element method (FEM) from COMSOL Multiphysics to design the microbolometer. We varied the layout, thickness, and dimensions (width and length) of different layers one at a time to study the heat transfer effect for obtaining the maximum figure of merit. This work reports the design, simulation, and performance analysis of the figure of merit of a microbolometer that uses GexSiySnzOr thin films as the sensing layer. From our design, we obtained an effective thermal conductance of , a time constant of , responsivity of , and detectivity of considering a bias current.
The microbolometer is an important device that has a variety of civilian, industrial, and military applications, especially in remote sensing and night vision. Microbolometers are sensor elements in uncooled infrared sensors, which makes the uncooled infrared sensors have the advantage of being smaller in size, light in weight and less expensive compared with cooled infrared sensors. If the microbolometers are arranged in a two-dimensional array, a thermo-graph of the object can be determined using a microbolometer based uncooled infrared sensor. Building the electro-thermal modeling over the microbolometer pixel is essential to determine the uncooled infrared sensor's performance, optimize the sensor's design structure and monitor its condition. Due to the fact that the knowledge for the complex semiconductor-material-based microbolometers over various kinds of design structures with the adjustable thermal conductance is limited so far, this work focuses on the thermal distribution first by considering factors of the radiation absorption, thermal conductance, convection feature and joule heating on varied geometry design structures using Finite Element Analysis (FEA) methods. Then the change of thermal conductance is depicted when the simulated voltage is applied quantitatively between the microplate and electrode through the dynamic interaction of the electro force and the structure deformation via the electro particles redistribution balance by utilizing the Microeletromechanical system (MEMS). In addition, a more accurate contact voltage is derived through the numerical simulation compared with the previous theoretical value and is also verified by the experiment.