In this paper, we propose a novel multi-functional reconfigurable intelligent surface (MF-RIS) that supports signal reflection, refraction, amplification, and target sensing simultaneously. Our MF-RIS aims to enhance integrated communication and sensing (ISAC) systems, particularly in multi-user and multi-target scenarios. Equipped with reflection and refraction components (i.e., amplifiers and phase shifters), MF-RIS is able to adjust the amplitude and phase shift of both communication and sensing signals on demand. Additionally, with the assistance of sensing elements, MF-RIS is capable of capturing the echo signals from multiple targets, thereby mitigating the signal attenuation typically associated with multi-hop links. We propose a MF-RIS-enabled multi-user and multi-target ISAC system, and formulate an optimization problem to maximize the signal-to-interference-plus-noise ratio (SINR) of sensing targets. This problem involves jointly optimizing the transmit beamforming and MF-RIS configurations, subject to constraints on the communication rate, total power budget, and MF-RIS coefficients. We decompose the formulated non-convex problem into three sub-problems, and then solve them via an efficient iterative algorithm. Simulation results demonstrate that: 1) The performance of MF-RIS varies under different operating protocols, and energy splitting (ES) exhibits the best performance in the considered MF-RIS-enabled multi-user multi-target ISAC system; 2) Under the same total power budget, the proposed MF-RIS with ES protocol attains 52.2%, 73.5%, and 60.86% sensing SINR gains over active RIS, passive RIS, and simultaneously transmitting and reflecting RIS (STAR-RIS), respectively; 3) The number of sensing elements will no longer improve sensing performance after exceeding a certain number.
23 July 2024 in IEEE Transactions on Wireless Communications
Integrated sensing and communication (ISAC) opens up new service possibilities for sixth-generation (6G) systems, where both communication and sensing (C&S) functionalities co-exist by sharing the same hardware platform and radio resource. In this paper, we investigate the waveform design problem in a downlink multi-user and multi-target ISAC system under different C&S performance preferences. The multi-user interference (MUI) may critically degrade the communication performance. To eliminate the MUI, we employ the constructive interference mechanism into the ISAC system, which saves the power budget for communication. However, due to the conflict between C&S metrics, it is intractable for the ISAC system to achieve the optimal performance of C&S objective simultaneously. Therefore, it is important to strike a trade-off between C&S objectives. By virtue of the multi-objective optimization theory, we propose a weighted Tchebycheff-based transformation method to re-frame the C&S trade-off problem as a Pareto-optimal problem, thus effectively tackling the constraints in ISAC systems. Finally, simulation results reveal the trade-off relation between C&S performances, which provides insights for the flexible waveform design under different C&S performance preferences in MIMO-ISAC systems.
Unmanned aerial vehicle (UAV)-assisted relay mobile edge computing (MEC) network is a prominent concept, where network deployment is flexible and network coverage is wide. In scenarios such as emergency communications and low-cost coverage, optimization of offloading methods and resource utilization are important ways to improve system effectiveness due to limited terminal and UAV energy and hardware equipment. A multilevel edge computing network resource optimization model on the basis of UAV fusion that provides relay forwarding and offload services is established by considering the initial energy state of the UAV, the green energy charging function, and the reliability of computing offload. With normalized system utility function maximization as the goal, a Markov decision process algorithm meets the needs of the practical application scene and provides a flexible and effective unloading mode. This algorithm is adopted to solve the optimal offloading mode and the optimal resource utilization scheme. Simulations verify the effectiveness and reliability of the proposed multilevel offloading model. The proposed model can optimize system resource allocation and effectively improve the utility function and user experience of computing offloading systems.
With the continuous development of Internet of Things, data transmission presents an exponential rising trend. Due to the limited energy storage and low transmission power of sensor nodes, it is impossible to continuously transmit a large amount of collected data to the remote cloud center for a long time. To guarantee the data reliability and extend the lifetime of sensor nodes, we use unmanned aerial vehicle (UAV) assisted data collection for data transmission to improve the performance of the network. As each sensor node has a certain business requirement for unloaded data volume, the flight trajectory and node access scheme are jointly optimized to minimize the energy consumed by all the sensing nodes. First, a model regarding the minimization problem of the maximum energy consumption was constructed. To effectively solve this nonconvex problem, the block coordinate descent method and slack variable method are used to transform the original optimization problem into two subproblems: trajectory optimization problem and node access scheme optimization problem. Second, an algorithm is proposed using the successive convex approximation to jointly optimize the flight trajectory and node access scheme. This algorithm acquires the optimal node access scheme and UAV flight trajectory successively in each iteration. When the number of iterations is great enough, the minimum–maximum energy consumption of sensing nodes is gradually converged. The simulation results showed that in comparison with the basic UAV flight scheme, the proposed algorithm can effectively reduce the energy consumption of nodes and improve the data transmission rate, and meanwhile, this algorithm is characterized by favorable convergence and tolerable complexity.
Heterogeneous network, which is a key technology of fifth generation(5G) mobile communication system, can effectively solve the spectrum resource shortage in the communication system. However, with densified deployment of base stations (BSs) and growth of user quantity and communication data size, the system energy consumption of BSs has imposed enormous economic pressure on network operators. As a result, energy consumption decreases and cost of communication system becomes a problem that requires urgent solutions. Renewable energy power generation devices of BSs have provided an opportunity for solving this problem with the development of smart power grids. However, the production rate of renewable energy sources presents intense volatility because of the influence of weather factors. This condition brings new challenges to the energy allocation of communication system. Therefore, an energy sharing link between BSs was established in a heterogeneous wireless network, and the distance between macro-BS and micro-BS was taken as an index. The energy consumption-based energy and user joint allocation method and energy cost-based energy and user joint allocation method were proposed. The two multi-objective optimization problems were converted into two convex optimization problems, and the optimal allocation strategies were solved using convex optimization toolbox. Simulation results indicate that the energy consumption-based allocation method takes energy consumption as the optimization objective and makes the shared link transmit energy sources as few as possible. This way reduces energy consumptions of the link and the system. Starting from the economic angle, the energy cost-based allocation method considers the influence of energy price, coordinates energy allocation between BSs based on energy cost using the shared link, and optimizes energy allocation among BSs at each time slot. Therefore, the method can reduce the energy cost of the system by a large margin.
16 April 2024 in IEEE Transactions on Vehicular Technology
In this paper, we investigate a relay-assisted cooperative ambient backscatter communication network, where the primary transmitter (PT) and the backscatter transmitter (BT) transmit a long packet with an infinite blocklength and a short packet with a finite blocklength to an information receiver (IR) with the aid of a relay node, respectively. Considering the energy causality constraint and the decoding error in the process of successive interference cancellation (SIC), we derive the expressions for PT's outage probability and BT's average block error rate (BLER). The analytical results show that the fixed SIC decoding scheme considered at IR may lead to a poor performance for both the outage probability and the average BLER. To address it, we propose an improved SIC decoding scheme and evaluate its achievable transmission performance by deriving the expressions for PT's outage probability and BT's average BLER. Computer simulations verify our derivations, confirm the superior performance of the improved SIC decoding scheme compared to the fixed one, and provide insights into the influences of different parameters (e.g., PT's transmission power, BT's power reflection coefficient, power allocation of the relay node) on the achievable outage probability and average BLER. Particularly, increasing the short-packet blocklength enhances the BLER performance of BT. However, it does not necessarily improve the outage performance of PT.