This brief proposes a fully digital background estimation technique for timing mismatch in time-interleaved analog-to-digital converters (TIADCs). The improved estimation technique is a feedback method based on statistics and Taylor series expansion. Besides, an exponential moving average (EMA) with adaptive coefficient is introduced to prevent performance degradation near specific frequencies, which improves the robustness of calibration. This estimation method can maintain high performance of accuracy and convergence speed across nearly the entire input frequency band. Furthermore, it is not restricted to the number of channels, amplitude, and frequency of the input signal. The effectiveness of this technique is demonstrated through off-chip calibration of a commercial 12-bit four-channel 3 GS/s TIADC using a 1.01 GHz input signal. Results indicate that the proposed method converges after approximately 3000 samples, reducing spurious signals stemming from timing mismatch by 20.6, 19.3, and 18.5 dB, respectively.
Timing-mismatch errors among channels in time-interleaved analog-to-digital converters (TIADCs) greatly degrade the whole performance of the system. Therefore, techniques for calibrating timing mismatch are indispensable, and a new fully-digital calibration technique is presented in this article. Based on a Hilbert filter, modified moving averagers (MMAs) and inverse cosine functions, the proposed estimation algorithm is fast (within 1200 sample points) and accurate. Meanwhile, the coordinate rotational digital computer (CORDIC) algorithm, which is used to implement inverse cosine functions, is also improved, giving it higher precision. In addition, a compensation method based on second-order Taylor series approximation with less hardware resource consumption is provided. Through analyses and simulations, this calibration technique proved to be suitable for TIADCs with an arbitrary number of channels, in which the signal-to-noise and distortion ratio (SNDR) and the spurious-free dynamic range (SFDR) were, respectively, improved from 24.06 dB and 24.57 dB to 67.96 dB and 85.69 dB.
This paper presents a novel digital background calibration technique for timing mismatches in time-interleaved analog-to-digital converters (TIADCs). We reconstruct and eliminate the timing mismatch based on the theory of timing-mismatch-induced spurious signals in the frequency domain. The proposed compensation algorithm utilizes the conjugate property between spurious signals to achieve low complexity. A coarse-fine correction architecture is adopted to eliminate higher-order time-skew errors. A novel feedforward estimation algorithm based on the correlation of adjacent channels is proposed to extract the time-skew errors. Our proposed calibration technique is suitable for an arbitrary number of channels. The simulation results demonstrate that the utilization of the proposed calibration technique yields significant improvements in both the signal-to-noise-and-distortion ratio (SNDR) and spurious-free dynamic range (SFDR). The SNDR and SFDR are improved from 55.82 dB and 56.64 dB to 79.92 dB and 105.98 dB, respectively.
A quantitative structure property relationship (QSPR) study was performed in this work to develop models for predicting reaction rate constants for reductive debromination of polybrominated diphenyl ethers (PBDEs) by zero-valent iron (ZVI). Both multiple linear regression (MLR) and artificial neural network (ANN) methods were employed for QSPR studies based on the experimental kinetic data of the fourteen PBDE congeners. Both the developed MLR and ANN models could give satisfactory prediction abilities, and the performance of the ANN model seems slightly better than that of the MLR model. In addition, energy of lowest unoccupied molecular orbital (ELUMO) and total energy (TE) were found to be the two relatively important variables in the ANN model via the assessment using both the Garson’s algorithm and connection weight approach.
This paper proposes an all-digital calibration algorithm that utilizes a reference channel to suppress the timing mismatch in the Time-Interleaved Analog-to-Digital Converter (TIADC). The output of the reference channel is aligned with each sub-channel in turn, therefore enabling the simultaneous sampling and conversion of the same input signal. First, the statistical characteristics across the channels are employed for estimating the timing mismatch; then, by comparing the output difference between the reference channel and the sub-channels that are sampled simultaneously, the deviation of the derivator can be calibrated. Finally, combining both calibration results yields an accurate final output. This proposed algorithm provides an effective solution to improve TIADC performance in high-speed data acquisition systems. The proposed architecture is applied to a 12-bit 2.4 GS/s four-channel TIADC model, and then its effectiveness is verified. The simulation results exhibit that the Effective Number Of Bits (ENOB) at an input signal frequency of 984 MHz shows a remarkable improvement from 6.88 bits to 11.92 bits. The effectiveness of this technique is also demonstrated through the off-chip calibration of a commercial 12-bit four-channel 2 GS/s TIADC using a 680 MHz input signal that is based on the actual chip results.