Rui Wang

Dr. Rui Wang


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 April 2023 in Coatings
Verified
Journal Article
Open access
PDF file
ZHZhenyi Huang
Zhenyi Huang
HHHuaqin Huang
Huaqin Huang
HHHao He
Hao He
Zhaoyang WuZhaoyang Wu
Zhaoyang Wu
XWXuesong Wang
Xuesong Wang
RWRui Wang
Rui Wang
Iron-based soft magnetic composites (SMCs) are the key components of high-frequency electromagnetic systems. Selecting a suitable insulating oxide layer and ensuring the integrity and homogeneity of the heterogeneous core–shell structure of SMCs are essential for optimizing their magnetic properties. In this study, four types of SMCs—Fe-Si-Cr/ZrO2, Fe-Si-Cr/TiO2, Fe-Si-Cr/MgO, and Fe-Si-Cr/CaO—were prepared via ball milling, followed by hot-press sintering. The differences between the microscopic morphologies and magnetic fproperties of the Fe-Si-Cr/AOx SMCs prepared using four different metal oxides were investigated. ZrO2, TiO2, MgO, and CaO were successfully coated on the surface of the Fe-Si-Cr alloy powders through ball milling, forming a heterogeneous Fe-Si-Cr/AOx core–shell structure with the Fe-Si-Cr alloy powder as the core and the metal oxide as the shell. ZrO2 is relatively hard and less prone to breakage and refinement during ball milling, resulting in a lower degree of agglomeration on the surface of the composites and prevention of peeling and collapse during hot-press sintering. When ZrO2 was used as the insulation layer, the magnetic dilution effect was minimized, resulting in the highest resistivity (4.2 mΩ·cm), lowest total loss (580.8 kW/m3 for P10mt/100kHz), and lowest eddy current loss (470.0 kW/m3 for Pec 10mt/100kHz), while the permeability stabilized earlier at lower frequencies.

30 May 2023 in Magnetochemistry
Verified
Journal Article
Open access
PDF file
ZHZhenyi Huang
Zhenyi Huang
HHHuaqin Huang
Huaqin Huang
HHHao He
Hao He
KLKaixuan Li
Kaixuan Li
Zhaoyang WuZhaoyang Wu
Zhaoyang Wu
RWRui Wang
Rui Wang
Soft magnetic composites (SMCs) are composed of alloy materials with the core and insulating layers as the shell. These composites exhibit high saturation magnetic sensitivity and low hysteresis loss, making them a promising material for various applications. The investigation of double layers is considered valuable as it can effectively address the issues of low resistivity and high dynamic loss that arise from non-uniform insulating layers in SMCs. In this study, Fe-Si-Cr/SiO2 particles with a core–shell heterostructure were produced via chemical vapor deposition (CVD). The Fe-Si-Cr/SiO2 materials were coated with different weight percentages (1–6%) of sodium silicate (SS). Subsequently, Fe-Si-Cr-based SMCs were synthesized through high-pressure molding and heat treatment. The effect of the SS weight percentage on microscopic changes and magnetic characteristics was investigated. These findings indicated that a concentration of 4 wt% of SS was the most effective at enhancing magnetic characteristics. The resultant SMCs exhibited high resistivity (21.07 mΩ·cm), the lowest total loss (P10 mt/300 kHz of 44.23 W/kg), a relatively high saturation magnetization (181.8 emu/g), and permeability (35.9). Furthermore, it was observed that the permeability exhibited stabilization at lower frequencies. According to these findings, the combination of CVD and double layers could lead to the further development of SMCs in a variety of applications.

30 March 2024 in Magnetochemistry
Verified
Journal Article
Open access
PDF file
YLYang Liu
Yang Liu
RWRui Wang
Rui Wang
KLKaixuan Li
Kaixuan Li
RCRan Chen
Ran Chen
Zhaoyang WuZhaoyang Wu
Zhaoyang Wu
YLYang Li
Yang Li
This study proposes the thermal decomposition of salt compounds and doping of carbonyl iron powders (CIPs) to optimize the preparation of an insulating layer through the solid-phase interface reaction. First, (Fe–Si–Cr + CIPs)/ZnSO4 composite powders were synthesized using the hydrothermal method and (Fe–Si–Cr + CIPs)/ZnO·SiO2·Cr2O3 SMCs with a ZnO·SiO2·Cr2O3 composite insulation layer were prepared through heat treatment and cold pressing. The effect of the CIP doping content on the microstructure and magnetic properties of the (Fe–Si–Cr + CIPs)/ZnO·SiO2·Cr2O3 SMCs were then investigated. During the heat treatment, ZnSO4 decomposed into solid ZnO and gaseous SO2 and O2. The O2 drives the solid-phase reaction, prompting the migration of nonmagnetic Si and Cr atoms from the interior of the Fe–Si–Cr soft magnetic powder to the surface insulation layer, finally forming the ZnO·SiO2·Cr2O3 insulation layer. The doped CIPs also show good plasticity during the coating process, combining with the coating layer to fill the internal pores of SMCs. Moreover, as the particles are small with a high surface area, they increase the number of reaction sites for ZnSO4 decomposition and facilitate the growth of the composite insulation layer, promoting its uniform distribution on the surfaces of the soft magnetic powders and CIPs. The lattice mismatch between the insulation layer and soft magnetic powder is reduced while the magnetic-phase content is increased, allowing the effective doping of CIPs sin the insulation layer. The magnetic properties of SMCs can be precisely regulated by changing the doping amount of CIPs. Unlike other insulating layer–preparation strategies based on the interfacial solid-phase reaction, the proposed method exploits the high plasticity and specific surface area of CIPs and removes the lattice mismatch between the insulation layer and soft magnetic powder.

12 August 2025 in Journal of Electronic Materials
Verified
Journal Article
Open access
PDF file
JJJixiang Jia
Jixiang Jia
HWHaiwei Wang
Haiwei Wang
GYGuang Yang
Guang Yang
ZLZhihao Lu
Zhihao Lu
RWRui Wang
Rui Wang
Zhaoyang WuZhaoyang Wu
Zhaoyang Wu
Preparing insulating layers via interfacial solid-phase reactions is regarded as one of the most effective strategies for enhancing the magnetic performance of soft magnetic powder cores (SMPCs). However, mismatches in lattice structures between the insulating layer and the magnetic powder can cause cracking in the insulating layer, thereby compromising the stability and performance of SMPCs under operational conditions. This study presents a refined method for preparing insulating layers based on solid-phase reactions, utilizing the thermal decomposition of salt compounds in combination with powders of differing particle sizes: 99.4 μm (S1) and 8.9 μm (S2). Initially, the FeSiCr(S1+S2)/ZnSO4 composite powder was synthesized through a hydrothermal method. Subsequently, FeSiCr(S1+S2)-based SMPCs with a SiO2@Cr2O3@ZnO (SCZ) composite insulating layer were successfully prepared by a combination of heat treatment and cold pressing. Then, we investigated the effect of varying powder ratios of different particle sizes on the microstructure and magnetic performances of FeSiCr(S1+S2)/SCZ SMPCs, and the results revealed that ZnSO4 decomposes into solid-phase ZnO and gaseous SO2 and O2 during heat treatment. Among these, O2 triggers the solid-phase reaction, causing non-magnetic Si and Cr atoms from the soft magnetic powder to migrate to the surface, leading to the formation of a composite insulating layer. The smaller FeSiCr(S2) powder fills gaps within the SMPCs and provides more sites for ZnSO4 decomposition and insulating layer formation. This process allows for the uniform growth of an insulating layer on the surface of the magnetic powder, thereby reducing the lattice mismatch while simultaneously increasing the magnetic phase content. The optimal magnetic performance was achieved at a powder ratio of 60:40 wt% (S1:S2), with maximum saturation magnetization (172.9 emu/g), magnetic permeability (31.3 at 10 mT, 500 kHz) and low core loss (465.62 kW/m3 at 30 mT, 200 kHz). These findings suggest that the optimized SMPCs are promising candidates for high-performance electromagnetic components. Graphical Abstract

23 August 2024 in Journal of Materials Science: Materials in Electronics
Verified
Journal Article
Closed access
PDF file
LLLi Liu
Li Liu
XWXingyi Wu
Xingyi Wu
KLKaixuan Li
Kaixuan Li
BFBo Feng
Bo Feng
RWRui Wang
Rui Wang
Zhaoyang WuZhaoyang Wu
Zhaoyang Wu

24 April 2026 in Journal of Materials Science: Materials in Electronics
Verified
Journal Article
Closed access
PDF file
KLKaixuan Li
Kaixuan Li
LLLi Liu
Li Liu
JLJiang Li
Jiang Li
ZHZe Hu
Ze Hu
RWRui Wang
Rui Wang
Zhaoyang WuZhaoyang Wu
Zhaoyang Wu