Growing environmental awareness and scarcity of natural resources are forcing the world to migrate from linear to circular economies. The possibility of partially replacing cement with ceramic-based waste from construction and demolition waste (C&DW) is a government and industry focus. The present study analyzes the effects of including finely ground complete walls of ceramic blocks (including masonry mortars) as supplementary cementing materials (SCM) on the physical, mechanical, and transport properties (water absorption and permeability) of concrete. The replacement ratio employed was 25% by weight of cement. Studies of the hydration evolution of cement pastes support the described properties of concretes. The findings reveal that the ground ceramic-based waste from C&DW stimulates hydration at all ages. Initially, this stimulation is predominantly physical (filler effect), but in later stages, it becomes chemical (pozzolanic reaction). Based on the results obtained in this study, it is possible to produce concrete with mechanical properties comparable to those of conventional concrete at 28 days.
2 January 2022 in Journal of Sustainable Cement-Based Materials
Environmental conservation is mandatory for the sustainable development of the construction industry. A large amount of ceramic waste results from construction and demolition waste (C&DW). In addition, the extended service life of the structure is essential. This paper assesses the effectiveness of powder ceramic wastes (PCWs) from C&DW to improve the durable performance (chloride diffusion, sulfate resistance, and alkali–silica reaction) of blended cement (replacement 24% by mass). The suitability of blended cement is supported by the proven pozzolanicity (Frattini test, XRD, FTIR, and nonevaporable water content). Additionally, PCWs incorporation effect on the life cycle analysis of concrete is included. All samples containing ceramic waste show pozzolanic activity at 28 days, significantly reduce the apparent chloride diffusion coefficient, present good performance against the sulfate attack and reduce the expansion caused by ASR. In addition, PCWs reduce CO2 emissions. Results reveal a comparable performance of PCWs, indicating the unnecessary classification of them.
This study compares the pozzolanic activity of kaolinitic and illite clays after calcination as they are the most abundant types of clays worldwide. The impact of calcined clays on microstructure development was tested by determining the porosity of cement paste as well as by phase and optical analysis of the cement matrix and the interfacial transition zone of concrete. As water transportation with damaging carbonate or chloride ions is the main reason for reduced durability of reinforced concrete, the results were complemented with water absorption tests on blended concretes. At 28 days, the system with calcined kaolinitic clay revealed a higher densification of its microstructure with a lower water absorption rate compared with plain concrete and concrete with calcined illite clay, which is related to its higher pozzolanic reactivity. Nonetheless, calcined illite clays can be considered as a low-cost clinker replacement as a significant pozzolanic contribution is detectable and after 90 days, the water absorption behaviour is comparable to those of the other systems investigated.
10 October 2019 in Journal of Sustainable Cement-Based Materials
A large amount of ceramic sanitary ware wastes (SW) results from the production and after demolition processes. This study proposes the use of SW as supplementary cementing materials (SCM) in concrete to contribute with construction and demolition waste management. Experiments were carried out on concretes and pastes using different proportions of SW-replacement. Physical, mechanical, and durable behavior of concrete was evaluated and how concrete was affected by the cement hydration process. The incorporation of SW to Portland cement to make concrete reduces the permeability in the matrix and refines the capillary pores, improving the mechanical properties and the behavior in aggressive environments, such as chlorides. The results show that it is recommended the use of SW as SCM to produce concretes with mechanical properties and durability comparable to those of a conventional concrete, at 28 days.
Demolition ceramic wastes (DCWs) were investigated in order to determine their potential use as supplementary cementitious materials in Portland Blended Cements (PBCs). For this purpose, three ceramic wastes were investigated. After characterization of the materials used, the effect of ceramic waste replacement (8, 24 and 40% by mass) was analyzed. Pozzolanic activity, hydration progress, workability and compressive strength were determined at 2, 7 and 28 days. The results showed that the ground wastes behave as filler at an early age, but as hydration progresses, the pozzolanic activity of ceramic waste contributes to the strength requirement.