Circumferential milling is used in wood processing, yet it generates vast quantities of dust and chips in a single pass, highlighting the need to predict chip dispersion and prevent associated hazards. This article presents findings from a theoretical and experimental analysis of chip size and kinematics of pine wood during cutting. A chip diffusion boundary surface model was established and its key parameters were determined through CCD testing. Results reveal that chip diffusion can be divided into three distinct areas based on motion state: main diffusion, random diffusion, and vortex. Notably, spindle speed and feed rate are most influential on the orthogonal diffusion angle of the main diffusion zone, whereas cutting depth most heavily impacts the top view diffusion angle. Chip scattering on the table showed an exponential increase in average chip size with sampling distance, whereas the boundary surface model accurately characterizes chip motion and demonstrates a reasonable degree of reliability, offering potential in predicting chip morphology and diffusion state. This model has important implications for wood milling practices, particularly in controlling chip dispersion.
Due to their outstanding properties, bamboo-based fiber composites are gaining significant traction in the fields of construction and decoration. Among the crucial process steps in their production, hot pressing stands out as a pivotal one. Temperature, being a key parameter in hot pressing, and its stability of control exert a profound impact on the finished mechanical properties and associated indices of bamboo-based fiber composites. In this investigation, we introduce an active disturbance rejection control (ADRC) methodology specifically tailored for the hot-pressing temperature of bamboo-based fiber composites. A mathematical model encompassing the motor, steam regulating valve, and, ultimately, the hot-pressing temperature is formulated, with the transfer functions at each level being precisely determined through parameter identification techniques. The simulation outcomes reveal that in the absence of signal interference, sinusoidal signal interference, or random signal interference, the ADRC method outperforms the traditional PID algorithm in the realm of hot-pressing temperature control for bamboo-based fiber composites. This approach effectively reduces the temperature fluctuations of the PID algorithm, thereby averting issues such as premature curing or board bursting. In summary, this study holds significant implications for enhancing the mechanical properties of bamboo-based fiber composites.