We study the dynamics of the gas flow discontinuities after pulse ionization of a half space in front of a flat shock wave moving in a channel. Pulse volumetric electric discharge initiated in the vicinity of the shock concentrates in front of the shock and heats the gas there. The heating is shown to be very rapid. We use the shadow imaging technique and a high speed camera to study the flow pattern evolution after the discharge. The pattern consists of two shocks separated by a contact surface. This structure corresponds to the classical Riemann problem formulation. Based on the observed pattern, we estimate the amount of discharge energy converted to heat during the discharge time: the rate of temperature increase is in the order of several degrees K per nanosecond.
An experimental study of the plasma-gas dynamic fluid formed after pulse ionization of the gas flow with a plane shock wave with Mach number 2.2–4.8 is carried out. Nanosecond volume discharge with UV preionization was switched on when the shock moved in a tube channel test section. Energy input occurs in the low-pressure gas volume separated by the shock surface within a time less than 200–300 ns; a single shock wave breaks into three discontinuities in accordance with the 1D Riemann problem solution. The initial (plasma-dynamic) stage of the flow in the nanosecond time range is visualized by glow recording; the supersonic gas processes in the microsecond time range are recorded using high-speed shadow imaging. Quantitative information about the dynamics of the shocks and contact surface (plots of horizontal distance) was obtained within time up to 25 µs. A region with an increased gas-discharge plasma glow intensity, after the discharge electric current termination, was recorded in the time interval from 0.3 to 1.5 µs; it was explained by a jump in gas temperature and density between the new shock wave and the contact discontinuity.
We have studied the dynamics of the plasma glow of pulsed discharges (sliding surface discharge and combined volume discharge with plasma electrodes) in the nanosecond range (100–12 000 ns) in...
The paper studies, both experimentally and numerically, a high-speed transient flow induced by a pulsed volume discharge in still air at low pressure. It is shown that, in the constricted mode, the discharge is capable of producing uniform deposition of the electrical energy into a long (24 mm in length), thin (less than 2 mm in radius) plasma column. Flow visualization experiments using particle image velocimetry (PIV) and high-speed shadow imaging indicate that this pulsed localized energy deposition generates a highly symmetrical cylindrical shock wave expanding at an average speed of 550 m/s within the first 40 μs after the discharge. Three-dimensional computational fluid dynamics (CFD) simulations successfully reproduce the experimentally observed flow structures and provide better insight into the complex discharge-induced flow. Modeling the trajectories of “virtual” particles within the CFD-predicted flow yields excellent agreement between numerical and PIV flow velocity profiles, and this comparison is used to quantify the rates of “rapid” energy thermalization in the pulsed discharge.
Schlieren, shadowgraph and other types of refraction-based techniques have been often used to study gas flow structures. They can capture strong density gradients, such as shock waves. Shock wave detection is a very important task in analyzing unsteady gas flows. High-speed imaging systems, including high-speed cameras, are widely used to record large arrays of shadowgraph images. To process large datasets of the high-speed shadowgraph images and automatically detect shock waves, convective plumes and other gas flow structures, two computer software systems based on the edge detection and machine learning with convolutional neural networks (CNN) were developed. The edge-detection software utilizes image filtering, noise removing, background image subtraction in the frequency domain and edge detection based on the Canny algorithm. The machine learning software is based on CNN. We developed two neural networks working together. The first one classifies the image dataset and finds images with shock waves. The other CNN solves the regression task and defines shock wave position (single number) based on image pixels tensor (3-D array of numbers) for each image. The supervised learning code based on example input-output pairs was developed to train models. It was shown, that the machine learning approach gives better results in shock wave detection accuracy, especially for low-quality images with a strong noise level. Software system for automated shadowgraph images processing and x-t curves of the shock wave and convective plume movement plotting was developed.
1 December 2019 in Experimental Thermal and Fluid Science