As a laser technology, the femtosecond laser is used in biomedical fields due to its excellent performance—its ultrashort pulses, high instantaneous power, and high precision. As a surface treatment process, the femtosecond laser can prepare different shapes on metal surfaces to enhance the material’s properties, such as its wear resistance, wetting, biocompatibility, etc. Laser-induced periodic surface structures (LIPSSs) are a common phenomenon that can be observed on almost any material after irradiation by a linearly polarized laser. In this paper, the current research state of LIPSSs in the field of biomedicine is reviewed. The influence of laser parameters (such as laser energy, pulse number, polarization state, and pulse duration) on the generation of LIPSSs is discussed. In this paper, the applications of LIPSSs by femtosecond laser modification for various purposes, such as in functional surfaces, the control of surface wettability, the surface colonization of cells, and the improvement of tribological properties of surfaces, are reviewed.
This study explores the effect of introducing additional alloy elements not only in a different order but also at different stages of the Ruhrstahl-Heraeus (RH) process of low-carbon silicon steel production. A more economical method, described as “pre-alloying”, has been introduced. The evolution of MnO-FeO inclusions produced by pre-alloying was investigated. Results show that spherical 3FeO·MnO inclusions form first, then shelled FeO·zMnO (z = 0.7–4) inclusions nucleate on the surface of pre-existing 3FeO·MnO. Spherical FeO·zMnO (z = 3–5) is further evolved from shelled 3FeO·MnO by diffusion. Because these MnO-FeO inclusions float up into the slag before degassing, the pre-alloying process does not affect the quality of the melt in the end. Both carbon content and inclusion size conform to industry standards.