Many practical applications require flexible high-sensitivity pressure sensors. However, such sensors are difficult to achieve using conventional materials. Engineering the morphology of the electrodes and the topography of the dielectrics has been demonstrated to be effective in boosting the sensing performance of capacitive pressure sensors. In this study, a flexible capacitive pressure sensor with high sensitivity was fabricated by using three-dimensional vertical graphene (VG) as the electrode and micro-pyramidal polydimethylsiloxane (PDMS) as the dielectric layer. The engineering of the VG morphology, size, and interval of the micro-pyramids in the PDMS dielectric layer significantly boosted the sensor sensitivity. As a result, the sensors demonstrated an exceptional sensitivity of up to 6.04 kPa−1 in the pressure range of 0–1 kPa, and 0.69 kPa−1 under 1–10 kPa. Finite element analysis revealed that the micro-pyramid structure in the dielectric layer generated a significant deformation effect under pressure, thereby ameliorating the sensing properties. Finally, the sensor was used to monitor finger joint movement, knee motion, facial expression, and pressure distribution. The results indicate that the sensor exhibits great potential in various applications, including human motion detection and human-machine interaction.
In high lumen laser projectors, it is required to use laser diodes coupled to multi-mode fibers (MMFs) to obtain a high power illumination module. In this paper, we have fabricated an electromagnetic micro-scanning mirror (EM-MSM), and we have firstly demonstrated a speckle reduction method by the combination of the EM-MSM and the MMF. With the help of a condenser lens, laser beams modulated and reflected from the EM-MSM are coupled into the MMF within its acceptance angle. Because the fast scanning behavior of the EM-MSM results in the phase modulation and mode coupling among the MMF guided modes, the light intensity field distributions at the exit aperture of the MMF are changing. During the charge-coupled device (CCD) integration time, the random speckle patterns are integrated and homogenized by the CCD camera, and hence speckle is reduced. By driving the EM-MSM in raster scan, the lowest compound speckle contrast ratio at 0.0794 is obtained, where the EM-MSM half scanning angles are 0.4 ° and the optical power loss is lower than 4.5%. The demonstrated technique is compact and can endure the high power of the laser module; thus, it has a promising potential in high lumen laser projector applications.
In this paper, a method is proposed to create a pair of one dimensional binary phase modulator matrices 1D-BPMs, which is mathematically equivalent to a single two-dimensional binary phase modulator matrix 2D-BPM based on Sylvester constructed Hadamard matrices. An advantage of 1D-BPM over 2D-BPM is that the number of drive electrodes can be reduced from N2 to 2N for a N×N Hadamard phase matrix, thus simplifying the drive interconnects and drive electronics. 1D-BPM can be based on electro-optical material and hence can be driven electrically, which is an advantage over the 2D-BPM which is usually etched on a glass substrate and actuated mechanically to implement the speckle reduction in laser projectors. We have discussed the algorithm for constructing the pair of dynamic 1D-BPMs to replace the 2D-BPM. Preliminary experiments are performed to demonstrate the validity of our concept.
We study laser speckle reduction by light pipes, and we propose a new method to improve its efficiency. Proof-of-concept refractive optical elements (ROEs) with a staircase-like structure are introduced before a holographic diffuser to split a laser beam into laser sub-beams. Optical paths of the laser sub-beams after transmitting through the ROEs are different, and these partially correlated (or uncorrelated) laser sub-beams are added in intensity basis because of the folded mirror reflections by the light pipe. Thus, laser spatial coherence is suppressed, which helps to reduce speckle. We demonstrate this method in a simplified laser projection system, where subjective speckle contrast is reduced from 0.33 to 0.24 before and after introducing a two-dimensional ROE, respectively. Comparing with other improved speckle reduction methods by light pipes, the proposed method is motionless and simpler.
Laser speckle reduction with a macro refractive optical element (mROE) is restricted by the limited entrance facet size of light pipe. Here, we have fabricated a micro-ROE (μROE) that incorporates three-dimensional micro-optical structures. The μROE with 2 × 2 duplicated multi-level cells is made of SU-8 photoresist with the help of multi-exposure lithography process. When the μROE works together with the mROE, objective speckle contrast is reduced to 0.2, where the light source is a low-coherence multimode laser diode. In principle, more speckle reduction can be obtained by fabricating μROEs with more cells and larger height differences among the cells.