Omid Mehrabi

Dr. Omid Mehrabi

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 July 2023 in Optics & Laser Technology
Verified
Journal Article
Closed access
Omid MehrabiOmid Mehrabi
Omid Mehrabi
SSS.M. Hossein Seyedkashi
S.M. Hossein Seyedkashi
MMMahmoud Moradi
Mahmoud Moradi

12 June 2023 in Metals
Verified
Journal Article
Open access
PDF file
Omid MehrabiOmid Mehrabi
Omid Mehrabi
SSS. M. Hossein Seyedkashi
S. M. Hossein Seyedkashi
Mahmoud MoradiMahmoud Moradi
Mahmoud Moradi
Direct Laser Metal Deposition (DLMD) is a state-of-the-art manufacturing technology used to fabricate 316L stainless steel/Inconel 625 functionally graded material (FGMs) in this research. For the practical application of these materials in the industry, the effects of process parameters on the geometric characteristics and surface roughness require more investigation. This FGM was additively manufactured in five layers by changing the 316L stainless steel/Inconel 625 ratio in each layer. The effects of laser power on geometric characteristics, height stability, and surface roughness were investigated. The microstructural analysis and microhardness profiles were studied. The results show that despite the high solidification rate, the segregation of alloying elements into dendritic areas occurred. It was also found that increasing the laser power will increase the height, width, height stability, and surface roughness of the gradient walls. The maximum width and height of the deposited layers were 1.615 and 6.42 mm, respectively, at the highest laser power (280 W). At the laser power of 220 W, the least surface roughness (Ra = 105 µm) and the best height stability (0.461 mm) will be obtained. The microhardness values will differ in various sections of the gradient walls in a range of 225–277 HV.

27 August 2024 in Micromachines
Verified
Journal Article
Open access
PDF file
Mahmoud MoradiMahmoud Moradi
Mahmoud Moradi
Omid MehrabiOmid Mehrabi
Omid Mehrabi
FRFakhir A. Rasoul
Fakhir A. Rasoul
AMAnas Abid Mattie
Anas Abid Mattie
Friedemann SchaberFriedemann Schaber
Friedemann Schaber
RKRasoul Khnadan
Rasoul Khnadan
The rapid advancement of additive manufacturing (AM) technologies has provided new avenues for creating three-dimensional (3D) parts with intricate geometries. Fused Deposition Modeling (FDM) is a prominent technology in this domain, involving the layer-by-layer fabrication of objects by extruding a filament comprising a blend of polymer and metal powder. This study focuses on the FDM process using a filament of Copper–Polylactic Acid (Cu-PLA) composite, which capitalizes on the advantageous properties of copper (high electrical and thermal conductivity, corrosion resistance) combined with the easily processable thermoplastic PLA material. The research delves into the impact of FDM process parameters, specifically, infill percentage (IP), infill pattern (P), and layer thickness (LT) on the maximum failure load (N), percentage of elongation at break, and weight of Cu-PLA composite filament-based parts. The study employs the response surface method (RSM) with Design-Expert V11 software. The selected parameters include infill percentage at five levels (10, 20, 30, 40, and 50%), fill patterns at five levels (Grid, Triangle, Tri-Hexagonal, Cubic-Subdivision, and Lines), and layer thickness at five levels (0.1, 0.2, 0.3, 0.4, and 0.5 mm). Also, the optimal factor values were obtained. The findings highlight that layer thickness and infill percentage significantly influence the weight of the samples, with an observed increase as these parameters are raised. Additionally, an increase in layer thickness and infill percentage corresponds to a higher maximum failure load in the specimens. The peak maximum failure load (230 N) is achieved at a 0.5 mm layer thickness and Tri-Hexagonal pattern. As the infill percentage changes from 10% to 50%, the percentage of elongation at break decreases. The maximum percentage of elongation at break is attained with a 20% infill percentage, 0.2 mm layer thickness, and 0.5 Cubic-Subdivision pattern. Using a multi-objective response optimization, the layer thickness of 0.152 mm, an infill percentage of 32.909%, and a Grid infill pattern was found to be the best configuration.

4 November 2024 in International Journal of Pressure Vessels and Piping
Verified
Journal Article
Closed access
VSV. Salarvand
V. Salarvand
FAF. Ahmadian
F. Ahmadian
MTM. Torabpour
M. Torabpour
MEMasoud EsmaeilZadeh
Masoud EsmaeilZadeh
Mustufa Haider AbidiMustufa Haider Abidi
Mustufa Haider Abidi
Dermot BrabazonDermot Brabazon
Dermot Brabazon

23 August 2024 in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Verified
Journal Article
Closed access
HSHashem Sabri
Hashem Sabri
Omid MehrabiOmid Mehrabi
Omid Mehrabi
MKMohammad Khoran
Mohammad Khoran
MMMahmoud Moradi
Mahmoud Moradi
In this study, the experimental investigation of the laser cutting process of polyethylene terephthalate glycol (PETG) sheets fabricated by the fused deposition modeling (FDM), was studied. The PETG sheets, with dimensions of 50 × 100 mm and thicknesses of 2.5, 5, and 7.5 mm, were fabricated using the FDM technique. Then, postprocessing laser cutting of the PETG sheets was undertaken by utilizing a 120-watt CO 2 laser cutting. Response surface methodology was used to evaluate the influence of laser power (75–105 W), sheet thickness (2.5–7.5 mm), and cutting speed (4–10 mm/s) on the upper kerf width (UKW), lower kerf width (LKW), the ratio of UKW to LKW (ratio), and upper heat affected zone (HAZ) of the cutting kerf wall. The kerf wall was photographed byusing an optical microscope; and the kerf geometry dimension values were measured by ImageJ software. The results showed that all three parameters of sheet thickness, cutting speed, and laser power have impact on the kerf geometry characteristics. The reduction in the cutting speed and rise in the laser power increased the UKW and LKW, due to the increase in laser input heat. Furthermore, by increasing the sheet thickness and laser power and decreasing the cutting speed, the ratio decreased. Considering the minimum speed of 4 mm/s and maximum power of 105 W in the PETG sheet with a thickness of 7.5 mm, the highest values of the UKW and LKW were 336.6 and 582.2 μm, respectively. The HAZ decreased as power was reduced and speed was increased. The minimum HAZ value of 118 μm was achieved at a maximum speed of 10 mm/s with a sheet thickness of 7.5 mm.

14 March 2024 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Verified
Journal Article
Closed access
Omid MehrabiOmid Mehrabi
Omid Mehrabi
SSS. M. Hossein Seyedkashi
S. M. Hossein Seyedkashi
MMMahmoud Moradi
Mahmoud Moradi
Three types of walls were produced by the direct laser metal deposition (DLMD) process; SS316L, Inconel 625 (IN625), and SS316L-Inconel 625 FGM. The thin walls were deposited on an AISI 4130 austenitic steel substrate in five layers with a length of 2 cm. The solidification behavior, secondary dendrite arm spacing (SADS) value, chemical composition, and hardness of samples were studied. Microstructures were evaluated using optical microscopy (OM) images, scanning electron microscopy (SEM), EDS Line, EDAX, and Map analyses. OM and SEM images showed an acceptable bonding between the layers in all samples. The main solidification was equiaxed dendritic and columnar dendritic in most parts. The growth of dendrites was perpendicular to the substrate. Some dendrites grew epitaxially at the interface of two sequential layers. The standard deviation of SDAS value for SS316L, IN625, and SS316L-IN625 FGM was 0.63, 0.71, and 0.73, respectively. The lowest value of SDAS was obtained in layer one, while the highest value was obtained in layer five of the thin walls. The average SDAS values for SS316L, IN625, and SS316L-IN625 FGM were 4.40, 4.53, and 4.76 µm, respectively. Therefore, the difference between the SDAS values was not significant. EDAX and Map analyses showed that the segregation of Nb and Mo to the dendritic boundary and the formation of eutectic, secondary phases, and brittle Laves phases have occurred. Additionally, the segregation of Nb and Mo to the dendritic boundary in the SS316L-IN625 FGM sample was higher than SS316L and IN625 samples. The microhardness values oscillated significantly and decreased by moving away from the substrate (in the build direction). The microhardness values of different points of the SS316L-IN625 FGM walls were in the range of 218–278 HV. EDS line scan, microstructure, and microhardness analyses indicated the successful fabrication of the SS316L-IN625 FGM by the DLMD process.