A heat sink is a specific type of heat exchanger integrated with heat generating devices - mostly electronics - for the sake of thermal management. In the design procedure of heat sinks, several considerations such as manufacturing cost, reliability, thermal and hydraulic performance have to be included. In the past few decades, the prevailing trend of electronics design miniaturization has led to high-power-density systems necessitating high performance cooling concepts. This paper intends to provide a comprehensive review on various employed heat transfer enhancement techniques in cooling procedures of electronics thermal management devices, with a focus on core ideas. The main motivation is to give a rapid overview on the key concepts in different high-performance cooling designs along with a quantitative comparison between the different concepts all in one reference which is missing in literature. For this, the key idea of each design is firstly categorized, and then a detailed description is provided for each case. The discussed categories consist of concepts based on channel cooling in various scales, phase transition, jet impingement, spray cooling and hybrid design. At the end, quantitative comparison is illustrated for thermal and hydraulic performance of a selection of the reviewed references covering all these different categories. Based on this comparison, an overview on thermo-hydraulic performance of the presented categories is provided, and recommendations for future studies are given based on this and the detailed review of references.

Multi-droplet impingement is a fundamental aspect inherent to all kinds of technical spray processes which typically aim at enhancing the convective exchange of reagents or heat at the impinged surface. In this paper, the impingement of multiple droplets onto a structured surface is investigated by a comprehensive CFD model, which resolves the dynamics of the individual droplets and the film on a micro-scale level based on the Volume of Fluid (VOF) method. The considered surface topology includes cavities and is typical for protective masks used in the spray etching of Printed Circuit Boards (PCBs). The agitation of the liquid film in terms of the convective mass transfer rates across virtual horizontal evaluation planes is studied and the influence of film height and droplet impaction velocity is elaborated. Passive tracer tracking is employed to investigate the release and re-entrainment of fluid at the surface cavities. Two modes of mass exchange between the cavities and the main flow upon droplet impingement are identified, which are central inflow accompanied by lateral outflow (1) and lateral inflow with outflow at the opposing side (2). A statistical analysis of the allocation of tracer particles shows that high impaction velocities and low film heights correlate with an enhanced decay of tracer particles within the cavities. The susceptibility to re-entrainment is also reduced by high impaction velocities, whereas increased film heights are found to promote re-entrainment.

As a consequence of rapid development of additive manufacturing (3D printing) methods, the academic/industrial demand has been continuously increasing. One field of application is the manufacturing of heat exchanging devices using this promising method. In this regard, understanding the underlying mechanisms from a thermo-hydraulic viewpoint becomes important. Therefore, in this study, scale-resolving large eddy simulation (LES) is applied to reveal the flow details in combination with a model of roughness topology occurring in additive manufacturing. To process the transient LES results, proper orthogonal decomposition (POD) is used to extract the coherent flow structures, and the extended POD is used to rank the flow modes based on thermal importance. The main aim of the present work is to go beyond the conventionally applied methodologies used for the evaluation of surface roughness, i.e., averaged numerical study or experimental overall performance evaluation of the flow/thermal response of additively manufactured surfaces in heat exchangers. This is necessary to reveal the underlying flow mechanisms hidden in the conventional studies. In this study, the behavior of the flow over the micro-scale surface roughness model and its effects on heat transfer are studied by assuming cone-shaped roughness elements with regular placement as the dominant surface roughness structures. The major discussions reveal the footprint of flow mechanisms on the heat transfer coefficient spatial modes on the rough surface. Moreover, comparative study on the flow/thermal behavior at different levels of roughness heights shows the key role of the height-to-base-diameter ratio of the roughness elements in thermal performance.

In this work, selected numerical simulation aspects are analyzed in terms of their effect on predictions of the m-c interface. The fixed-grid enthalpy porosity phase change model, which is highly attractive in the field of modeling sapphire crystallization processes, is examined for its sensitivity to the mushy zone parameter as well as the grid resolution. A further focus is set to the simulation of thermal transport including internal radiation in the crystal and the melt via the finite volume method. Depending on the purpose of the investigation, different requirements on the angular resolutions are relevant. While most of the m-c interface as well as the temperature distribution remain practically unchanged at reasonable resolutions, a high sensitivity of the m-c interface in the near-wall region is demonstrated. This sensitivity is also observed in terms of radiative transport and, hence, the total heat transfer.

As a key process subsequent to continuous casting, the cooling of cast slabs is of central importance for achieving desirably low internal stresses, thereby minimizing the risk of crack formation and structural breakage. Although the primary and secondary cooling process in continuous casting are well-established in research, studies on the thermo-metallurgical-mechanical phenomena during slab yard cooling remain critically limited. In this work, a coupled thermo-metallurgical-mechanical model is presented that elucidates the process of slab cooling, addressing the combined effects of specific alloys and cooling conditions. Three universal stages of stress accumulation are identified: the pre-transformation stage (1), the transformation stage (2), and the post-transformation stage (3). Specifically, the early ferrite transformation—which is key to many concepts of cracking susceptibility—is carefully analyzed. While stress accumulation in the transformation stage is substantially driven by the intrinsic material physics, it is shown that the potential for reducing room-temperature residual stresses resides in the application of innovative process designs in the post-transformation stage. Accordingly, a stress reduction of 50% can be achieved in critical locations. The developed model represents a versatile tool for process design and optimization, thereby contributing to the production of advanced, next-generation high-strength steels.