This paper proposes a secondary voltage, frequency, and active power sharing control for autonomous inverter-based microgrids with event-triggered communications. A proportional-integral consensus-based control scheme is introduced which benefits from need-based (event-triggered) data exchange among distributed generators. The employed event-triggering condition i) ensures the system stability, ii) ensures that the system is Zeno-free and there exists a controllable minimal inter-event time, iii) removes the redundant communications during both transient and steady-state stages, iv) accounts for directed communication network architectures, and v) is fully distributed from both design and implementation standpoints. Effectiveness of the proposed controller for various case studies is verified via MATLAB/Simulink-based simulations. Comparison between different cases and conventional strategies are also included.
13 March 2019 in IEEE Transactions on Power Systems
This paper proposes a distributed control scheme to compensate for droop-induced frequency deviations in autonomous microgrids. In this scheme, no extra direct frequency control and proportional-integral compensation are employed to remove the frequency deviations; that is, the deviations are compensated instantaneously. To reduce the communication burden, the scheme is then equipped with a need-based (eventtriggered) data exchange strategy. An event-triggering mechanism is introduced which, i) highly reduces the amount of communications in both transient and steady-state stages and ii) ensures that the intervals between consecutive communication instants are positive (i.e., the system is Zeno-free). Stability and equilibrium analyses of the resultant system considering the whole system dynamics are provided, as well. Effectiveness of the proposed controller for different cases is verified by simulating a microgrid in MATLAB/SimPowerSystems software environment.
Reactive power sharing and voltage containment for inverter-based resources (IBRs) are two important but related objectives in inverter-based grids. In this paper, we propose a distributed control technique to achieve these objectives simultaneously. Our controller consists of two components: a purely local nonlinear integral controller that adjusts the IBR voltage setpoint, and a distributed primal-dual optimizer that coordinates reactive power sharing among the IBRs using neighbor-to-neighbor communication. The controller prioritizes the voltage containment objective over reactive power sharing at all times; except for the IBRs with saturated voltages, it provides reactive power sharing among all IBRs. Considering the voltage saturation and the coupling between voltage and angle dynamics, a formal closed-loop stability analysis based on singular perturbation theory is provided, which provides practical tuning guidance for the overall control system. To validate the effectiveness of the proposed controller for different case studies, we apply it to a low-voltage microgrid, the modified CIGRE medium-voltage network benchmark, and the IEEE 33 bus radial distribution system, all simulated in the MATLAB/Simulink environment.
This article proposes a distributed secondary control scheme that drives a dc microgrid to an equilibrium point where the generators share optimal currents, and their voltages have a weighted average of nominal value. The scheme does not rely on the electric system topology nor its specifications; it guarantees plug-and-play design and functionality of the generators. First, the incremental model of the microgrid system with constant impedance, current, and power devices is shown to admit a port-Hamiltonian (pH) representation, and its passive output is determined. The economic dispatch problem is then solved by the Lagrange multipliers method; the Karush-Kuhn-Tucker conditions and weighted-average formation of voltages are then formulated as the control objectives. We propose a control scheme that is based on the Control by Interconnection design philosophy, where the consensus-based controller is viewed as a virtual pH system to be interconnected with the physical one. We prove the regional asymptotic stability of the closed-loop system using Lyapunov and LaSalle theorems. Equilibrium analysis is also conducted based on the concepts of graph theory and economic dispatch. Finally, the effectiveness of the presented scheme for different case studies is validated with a test microgrid system, simulated in both MATLAB/Simulink and OPAL-RT environments.
6 November 2019 in IEEE Transactions on Industrial Electronics
Herein, a distributed switched control system is proposed which aims at frequency regulation and total generation cost minimization within a droop-based microgrid considering generator and line power constraints. The minimization is solved with Lagrange method and is achieved by realizing the equal incremental cost criterion via consensus algorithm. An online network reconfiguration is also proposed which bypasses a distributed generator when it violates the generation limits or gets disconnected, or when its corresponding line power flow exceeds its upper limit. It is mathematically probed that the proposed reconfiguration is a distributed online Kron reduction which leads to a new reduced data network; it preserves the existing spanning trees from cutting when a distributed generator is bypassed. Equilibrium analyses are conducted to show that the proposed switched system converges to desired steady state. Stability of the system based on common quadratic Lyapunov function is discussed. Effectiveness of the proposed controller for different case studies is verified by adapting it to a test microgrid system.
20 October 2022 in IEEE Transactions on Power Systems
This letter proposes a general nonlinear control framework for load-sharing and voltage containment of dispatchable generators in dc networks. Our framework covers centralized, distributed, and decentralized control techniques and provides a unified perspective. First, we formulate the control objective as a steady state optimization problem and derive the Karush-Kuhn-Tucker (KKT) conditions. Second, we propose a nonlinear integral controller that drives the system towards a steady state where the KKT conditions are satisfied and the voltages stay within limits. Third, we propose different model-free methods for obtaining the integral set-point, based on the optimality conditions. Finally, we verify the effectiveness of our proposal via MATLAB-based simulations.