Fang-wen Ge

Dr. Fang-wen Ge


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 June 2023 in Materials
Verified
Journal Article
Open access
PDF file
FZFeiyan Zhang
Feiyan Zhang
XLXiang Liu
Xiang Liu
FGFang-wen Ge
Fang-wen Ge
LWLei Wu
Lei Wu
Ductility-based structural design is currently the mainstream method. In order to analyze the ductility performance of concrete columns with high-strength steel reinforcements under eccentric compression, corresponding experimental studies have been performed. Numerical models were established, and their reliability was verified. Based on the numerical models, the parameter analysis was carried out, where eccentricity, concrete strength, and reinforcement ratio were considered to systematically discuss the ductility of the concrete column section with high-strength steel reinforcement. The results show that the ductility of the section under eccentric compression increases with the strength of the concrete and eccentricity, and decreases with the reinforcement ratio. Finally, a simplified calculation formula capable of quantitatively evaluating the section ductility was proposed.

31 May 2023 in Mathematics
Verified
Journal Article
Open access
PDF file
YYYan Yang
Yan Yang
FGFang-wen Ge
Fang-wen Ge
XLXiang Liu
Xiang Liu
For plate structures, their random parameters can be regarded as a two-dimensional random field in the plane. To solve the plate theory considering a two-dimensional random field, an efficient strategy for the stochastic finite element method was adopted. Firstly, the stochastic finite element method was used to establish the plate structural model, in which the random field characteristics of the parameter were considered, and the mathematical expression of its random field was obtained through the Karhunen–Loève expansion; secondly, the point estimate method was applied to calculate the statistics of random structures. The computational efficiency can be significantly improved through the reference point selection strategy. The accuracy and efficiency of the calculation strategy were verified, and the influences of correlation length and coefficient of variation of the parameter on the random response of plate structures under different plate types (including Kirchhoff plate and Mindlin plate) and boundary conditions (including simply supported and clamped supported) were discussed. The proposed method can provide some help in solving static problems of plate structures.

26 February 2026 in Buildings
Verified
Journal Article
Open access
PDF file
FGFang-wen Ge
Fang-wen Ge
WDWen-Qing Deng
Wen-Qing Deng
HCHao Chen
Hao Chen
XLXuhong Liu
Xuhong Liu
XLXiang Liu
Xiang Liu
Geopolymer concrete, with its waste-reutilization property and reduction in carbon footprint relative to conventional concrete, combined with high-mechanical properties, has gained very broad recognition during the last few years. In real-life applications, however, there exists some variation in its mechanical properties, which has a direct impact on the structural safety and reliability. Thus, there is a strong need to thoroughly explore this variability in performance and its implications for the structure. This paper has used response surface methodology to explore the influence of three factors, namely fly ash to binder ratio, aggregate to binder ratio, and water to binder ratio (W/B). Mix proportions had been developed to 13 mixes, and 260 specimens were tested in compressive strength, splitting tensile strength, elastic modulus, and slump. There were statistical properties calculated. The findings have shown that the effect of W/B on the coefficient of variation (COV) of compressive and splitting tensile strength is a significant one. W/B below 0.45 indicates that the COV of compressive and splitting tensile strengths is kept at a low level of 0.05–0.08. Nevertheless, at W/B above 0.48, the COV is so high as above 0.15. Through statistical testing, the compressive strength was found to be normally distributed (p = 0.0585, μ = 0.9800, σ = 0.572) and this is consistent with the normal distribution general structure of ordinary Portland cement concrete and the splitting tensile strength was found to be of a Weibull distribution (p = 0.6673, μ = 0.9427, σ = 0.1678), which reflects the standard deviation of the strength pattern and brittle nature of the material when it is subjected to a tensile load.