Feiyan Zhang

Dr. Feiyan Zhang


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 December 2022 in Materials
Verified
Journal Article
Open access
PDF file
FZFeiyan Zhang
Feiyan Zhang
FFFan Feng
Fan Feng
XLXiang Liu
Xiang Liu
In concrete structures, replacing conventional steel bars with high-strength steel reinforcement (HSSR) can effectively save the use of materials. However, the deformation properties and strength dispersion of HSSR are different from those of conventional steel reinforcement, which restricts or conservatively uses them in practical applications. For example, the partial safety factor of HRB500 grade steel bars (the yield strength is 500 MPa) in guideline GB50010-2010 is larger than that of conventional steel bars, and there is no relevant guidance for HRB600 grade steel bars (the yield strength is 600 MPa). Based on this, this paper will propose the limit state design method of high-strength steel reinforced concrete beam (HSSRCB) based on reliability analysis, which is convenient for the popularization and use of HSSR. Firstly, the flexural performance test of HSSRCBs was introduced, and the flexural capacity of HSSRCB was analyzed based on the existing prediction model. Second, a sectional numerical analysis model was established, where the section was discretized into several points, and then the curvature was gradually increased to obtain the corresponding bending moment through integration. A large number of samples were calculated to obtain statistical characteristics of the error of prediction model. Then, the limit state functions were established for two kinds of format, including partial safety factor format (PSSF) and resistance reduction factor format (RRFF), respectively, and the reliability of HSSRCBs was analyzed based on Monte Carlo simulation. Finally, the recommended values of partial safety factor of material and reduction factor of bearing capacity were proposed, in which the design strength of HRB500 and HRB600 reinforcement was 454 MPa and 545 MPa for PSSF, respectively, and the resistance reduction factor for the flexural capacity of HSSRCB was 0.8 and 0.75 for RRFF, respectively.

14 June 2023 in Materials
Verified
Journal Article
Open access
PDF file
FZFeiyan Zhang
Feiyan Zhang
XLXiang Liu
Xiang Liu
FGFang-wen Ge
Fang-wen Ge
LWLei Wu
Lei Wu
Ductility-based structural design is currently the mainstream method. In order to analyze the ductility performance of concrete columns with high-strength steel reinforcements under eccentric compression, corresponding experimental studies have been performed. Numerical models were established, and their reliability was verified. Based on the numerical models, the parameter analysis was carried out, where eccentricity, concrete strength, and reinforcement ratio were considered to systematically discuss the ductility of the concrete column section with high-strength steel reinforcement. The results show that the ductility of the section under eccentric compression increases with the strength of the concrete and eccentricity, and decreases with the reinforcement ratio. Finally, a simplified calculation formula capable of quantitatively evaluating the section ductility was proposed.

25 May 2026 in Materials
Verified
Journal Article
Open access
PDF file
QWQing Wu
Qing Wu
FZFeiyan Zhang
Feiyan Zhang
ZWZonghua Wu
Zonghua Wu
YCYunzhou Chen
Yunzhou Chen
HZHuiqiang Zhao
Huiqiang Zhao
XLXiang Liu
Xiang Liu
Negative Poisson’s ratio (NPR) bars, as novel materials, exhibit a significant volumetric dilation effect under tension. Compared to conventional reinforcement, NPR bars offer distinct advantages, including high ductility, high strength, and superior corrosion resistance. This study investigates the tensile properties of three types of NPR bars: the bare round bar, spiral ribbed bar, and steel strand. Their bond behavior with concrete was examined through central pull-out tests, considering the influences of bar type, NPR bar diameter, and anchorage length. The analysis focuses on the tensile mechanical properties, characteristics of the bond–slip curves, failure modes, and the development of predictive models for key bond–slip parameters. The results indicate that all three NPR types possess a high elastic modulus and exceptional ductility. The bare round bar achieved an elongation at break of 51.2%, with only minor necking observed at the fracture surface. The bond failure mode is influenced by bar type, NPR bar diameter, and anchorage length: pull-out failure occurred for the bare round bar, spiral ribbed bar with short anchorage length, and small-diameter steel strand, whereas splitting failure was observed for the spiral ribbed bar with long anchorage length. The large-diameter strand exhibited a combined splitting–pull-out failure. Furthermore, the bond–slip curves for the bare round bar and steel strand displayed two distinct peak strengths. The bond strength of the bare round bar increased with longer anchorage length, while it decreased for both the spiral ribbed bar and steel strand. Empirical models developed based on experimental data demonstrate good predictive accuracy for the bond performance of the different bar types.