To design a soft robotic fish with high performance by a biomimetic method, we are developing a soft robotic fish using piezoelectric fiber composite (PFC) as a flexible actuator. Compared with the conventional rigid robotic fish, the design and control of a soft robotic fish are difficult due to large deformation of flexible structure and complicated coupling dynamics with fluid. That is why the design and control method of soft robotic fish have not been established and they motivate us to make a further study by considering the interaction between flexible structure and surrounding fluid. In this paper, acoustic fluid-structural coupling analysis is applied to consider the fluid effect and predict the dynamic responses of soft robotic fish in the fluid. Basic governing equations of soft robotic fish in the fluid are firstly described. The numerical coupling analysis is then carried out based on different structural parameters of soft robotic fish. Through the numerical analysis, a new soft robotic fish is finally designed, and experimental evaluation is performed. It is confirmed that the larger swimming velocity and better fish-like swimming performance are obtained from the new soft robotic fish. The new soft robotic fish is developed successfully for high performance.
25 April 2022 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
Taking the mechanical seal of the submersible as the object, a transient coupled heat transfer model was established, and the deformation of the seal face under stable and alternating conditions was investigated by considering the thermal–mechanical coupling effect. The deformation characteristics of the seal face under two different alternative forms of amplitude and period were analyzed. The morphology and wear characteristics of the seal face were measured and discussed based on the pseudo-real test of the mechanical seal under alternating loads. The results showed that the seal face tended to be squeezed near the inner diameter and a tapered convergent gap appeared at the outer diameter of the seal face under alternating loads. The deformation of the seal face presented obvious alternating transient characteristics under alternating loads, and the deformation under alternating rotational speed was greater than that of alternating medium pressure. The deformation of the seal face increased with the amplitude of the alternating loads, while the period of the alternating loads had little influence on it. The wear mechanism of the seal face under alternating conditions was mainly abrasive wear, and the wear caused by alternating rotational speed is more significant.
Robotic fishes using artificial muscle as actuators have been described recently. The purpose of this work is to develop a flexible robotic fish using the piezoelectric fiber composite (PFC). To achieve the good flexibility and mobility of the robotic fish, we proposed a simple and compact structure. The load simulation method of piezoelectric actuator was employed to improve the fish's movement performance and swimming efficiency. By the analysis of the driving characteristics of the PFC, the robot structure with symmetrical distribution was designed based on the caudal fin propulsion mode. This structure was verified reasonable in the theoretical and simulation method. The dynamic characteristics of this underwater robot were both analyzed through the experiments and numerical analysis of Finite Element Method (FEM). The calculated results were congruent well with the experiment measurements of the prototype. Relatively high swimming speed was achieved during the experimental tests for a prototype. This indicated the numerical methods can be applied in the structural optimization and dynamic analysis of the robotic fish. More information will be available for the fluid-structure interaction analysis in future.
1 January 2012 in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
Using piezo-electric fiber composite as actuators suitable for soft robotics, we have constructed a prototype trunk flexion prpulsion type underwater robot. Macro Fiber Composite is a new piezoelectric fiber composite material. In addition to the basic characteristics of a conventional piezoelectric material, it has excellent flexibility and impact resistance. In this paper, a control method to reach the target pose from the initial pose(PTP), is proposed and its effectiveness was verified by experiments.
1 January 2014 in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
Aimming to design a soft robotic fish for more flexible and efficient fish-like motion by biomimetic method, we are developing a snake-like robot with body undulating propulsion using the piezoelectric fiber composite (PFC) as soft actuator by mimicking the sea snake. Due to the large deformation of flexible structure and complicated dynamics with fluid, the design method for soft fish robots has not been established, and we need to study it by considering the coupling between them. In this paper, the sea snake-like robot using PFC is developed by the analytical simulation with considering the coupling between flexible structure and fluid. The efficient body undulating propulsion based on meandering motion is realized successfully from the prototype, and its swimming efficiency is similar to the real sea snake's.