The friction and wear properties of nitrile rubber (NBR) against 316L stainless steel pairs were investigated by using a sphere-on-disc test device. The in
9 April 2018 in Chinese Journal of Mechanical Engineering
Spiral groove dry gas seal (S-DGS), the most widely used DGS in the world, encounters the problem of high leakage rate and inferior film stability when used in high-speed machinery equipment, which could not be well solved by optimization of geometrical parameters and molded line of spiral groove. A new type of bionic cluster spiral groove DGS (CS-DGS) is proved to have superior film stability than S-DGS at the condition of high-speed and low-pressure numerically. A bionic CS-DGS is experimentally investigated and compared with common S-DGS in order to provide evidence for theoretical study. The film thickness and leakage rate of both bionic spiral groove and common spiral groove DGS are measured and compared with each other and with theoretical values under different closing force at the condition of static pressure, high-speed and low-pressure, and the film stiffness and stiffness-leakage ratio of these two face seals are derived by the relationship between closing force and film thickness at the steady state. Experimental results agree well with the theory that the leakage and stiffness of bionic CS-DGS are superior to that of common S-DGS under the condition of high-speed and low-pressure, with the decreasing amplitude of 20% to 40% and the growth amplitude of 20%, respectively. The opening performance and stiffness characteristics of bionic CS-DGS are inferior to that of common S-DGS when rotation speed equals to 0 r/min. The proposed research provides a new method to measure the axis film stiffness of DGS, and validates the superior performance of bionic CS-DGS at the condition of high-speed and low-pressure experimentally.
12 November 2018 in Journal of Zhejiang University-SCIENCE A
The film stiffness of dry gas seal must be sufficient to keep gas film stable at high and low speed. A generalized geometric model based on triangles is proposed to characterize spiral grooves. A mathematical model is established and solved using the finite difference method to obtain steady performance. The optimum spiral grooves for maximum opening force and film stiffness are obtained at low speed, and their steady performance is compared with conventional spiral grooves numerically and experimentally. The pressure and flow field of optimum spiral grooves and conventional spiral grooves are simulated to reveal the mechanism of the performance difference. Results show that through-combined spiral grooves outperform the other derived spiral grooves. Their film stiffness is up to 15% larger than that of conventional spiral grooves at low speed.
25 April 2022 in Journal of the Brazilian Society of Mechanical Sciences and Engineering