Membranes based on polyvinyl alcohol crosslinked with furfural, both unmodified and modified with aminosulfonic acid with and without tetraethoxysilane (TEOS), and membranes not crosslinked with furfural but modified with aminosulfonic acid are obtained and studied. The composition, surface morphology, degree of swelling in water, and specific electrical conductivity are studied. It is found that an electrolytic membrane based on polyvinyl alcohol crosslinked with furfural modified with tetraethoxysilane and aminosulfonic acid has the highest specific electrical conductivity (2.35 × 10–2 S/cm at a temperature of 95°С) and a wider range of temperature stability (20–160°С) in comparison with other obtained membranes based on polyvinyl alcohol and the reference membrane Nafion-115. It is determined that the degree of swelling of the developed membranes is rather high in comparison with the reference membrane Nafion-115.
Hybrid ion-conducting membranes (HIMs) are obtained by the liquid-phase synthesis method, and the degree of their swelling in water and ionic conductivity are studied. The design of a multifactorial experiment by the Latin square method makes it possible to select the optimum ratio of the functional components of the HIMs. It is found that the obtained hybrid membranes are anion-conducting.
1 April 2023 in Inorganic Materials: Applied Research
The influence of atmospheric corrosion inhibitors NOTECh, N-M-1, and FMT and phosphating primer VL-02 on the electrochemical properties of anticorrosion coatings based on a new modification of OS-51-03M organosilicate composition is considered. For corrosion tests using the method of potentiodynamic polarization, plates made of carbon steel grade St3sp5 were used, on which coatings were applied by the paint and varnish method. It was found that the NOTECh aqueous phosphating composition and the N‑M-1 corrosion inhibitor significantly increase the corrosion resistance of organosilicate coatings in an aggressive environment—3% NaCl solution. For these coatings, it is impossible to register the current and corrosion potential after 1 month of exposure of the coatings in a corrosive environment. Under similar measurement conditions, the electrochemical parameters of steel plates with an unmodified organosilicate coating were determined: the corrosion current density is 8 × 10–9 A/m2; the corrosion potential is –144 mV. It was found that the VL-02 phosphating primer has little effect on increasing the duration of anticorrosive protection of the organosilicate coating system. The type of inhibitory protection of atmospheric corrosion inhibitors is determined.