We propose that the crystallinity of two-dimensional (2D) materials is a crucial factor for achieving highly effective work function (WF) modification. A crystalline 2D MoO3 monolayer enhances substrate WF up to 6.4 eV for thicknesses as low as 0.7 nm. Such a high WF makes 2D MoO3 a great candidate for tuning properties of anode materials and for the future design of organic electronic devices, where accurate evaluation of the WF is crucial. We provide a detailed investigation of WF of 2D α-MoO3 directly grown on highly ordered pyrolytic graphite, by means of Kelvin probe force microscopy (KPFM) and ultraviolet photoemission spectroscopy (UPS). This study underlines the importance of a controlled environment and the resulting crystallinity to achieve high WF in MoO3. UPS is proved to be suitable for determining higher WF attributed to 2D islands on a substrate with lower WF, yet only in particular cases of sufficient coverage. KPFM remains a method of choice for nanoscale investigations, especially when conducted under ultrahigh vacuum conditions. Our experimental results are supported by density functional theory calculations of electrostatic potential, which indicate that oxygen vacancies result in anisotropy of WF at the sides of the MoO3 monolayer. These novel insights into the electronic properties of 2D-MoO3 are promising for the design of electronic devices with high WF monolayer films, preserving the transparency and flexibility of the systems.
29 September 2025 in The Journal of Physical Chemistry C
Molybdenum trioxide shows many attractive properties, such as a wide electronic band gap and a high relative permittivity. Monolayers of this material are particularly important, as they offer new avenues in optoelectronic devices, e.g., to alter the properties of graphene electrodes. Nanoscale electrical characterization is essential for potential applications of monolayer molybdenum trioxide. We present a conductive atomic force microscopy study of an epitaxially grown 2D molybdenum oxide layer on a graphene-like substrate, such as highly oriented pyrolytic graphite (HOPG). Monolayers were also investigated using X-ray photoelectron spectroscopy, atomic force microscopy (semi-contact and contact mode), Kelvin probe force microscopy, and lateral force microscopy. We demonstrate mobility of the unpinned island under slight mechanical stress as well as shaping and detachment of the material with applied electrical stimulation. Non-stoichiometric MoO3-x monolayers show heterogeneous behavior in terms of electrical conductivity, which can be related to the crystalline domains and defects in the structure. Different regions show various I–V characteristics, which are correlated with their susceptibility to electrodegradation. In this work, we cover the existing gap regarding nanomanipulation and electrical nanocharacterization of the MoO3 monolayer.
The presented research shows that commercially available graphene on quartz modified with rhenium oxide meets the requirements for its use as a conductive and transparent anode in optoelectronic devices. The cluster growth of rhenium oxide enables an increase in the work function of graphene by 1.3 eV up to 5.2 eV, which guarantees an appropriate adjustment to the energy levels of organic semiconductors used in organic light-emitting diode devices.
The heterostructure consisting of graphene and two-dimensional (2D) crystalline molybdenum trioxide (MoO3) layers was fabricated through a wet transfer method using a polymer to transfer the MoO3 layers from the mica crystal surface. Using a heating plate method, this crystalline MoO3 was initially grown on mica under normal atmospheric air conditions. Furthermore, the authors demonstrated that the only MoO3 phase forms on the molybdenum foil following annealing in air, as confirmed by X-ray photoelectron spectroscopy (XPS) study. The resulting graphene heterostructure was examined using optical and atomic force microscopy (AFM). The fabrication method introduced here offers a cost-effective alternative to the more costly and complex ultra-high vacuum techniques used for epitaxial layer fabrication. This graphene heterostructure holds potential as a conductive and transparent anode for the organic light-emitting diode (OLED) technology.
A graphene/NPB structure with Re2O7 as an interfacial layer in the context of its potential use in the design of an organic light-emitting diode (OLED) is investigated. The X-ray photoelectron spectroscopy (XPS) study shows the formation of the Re2O7 phase on a monolayer graphene on quartz during thermal deposition in ultra-high vacuum (UHV). The ultraviolet photoelectron spectroscopy (UPS) study shows an enhancement of the work function of the graphene heterostructure after deposition of the Re2O7 layer up to 5.4 eV. The hole injection barrier between the Re2O7/graphene heterostructure and the N-bis-(1-naphthyl)-N,N-diphenyl-(1,1-biphenyl)-4,4-diamine (NPB) layer was estimated to be 0.35 eV, which is very promising for a good OLED performance.