Ilmi Abdullah

Prof. Dr. Ilmi Abdullah


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 August 2023 in Energies
Verified
Journal Article
Open access
PDF file
SSSuherman Suherman
Suherman Suherman
IAIlmi Abdullah
Ilmi Abdullah
MSMuhammad Sabri
Muhammad Sabri
Arridina Susan SilitongaArridina Susan Silitonga
Arridina Susan Silitonga
Waste cooking oil (WCO) biodiesel has some disadvantages, such as poor cold flow properties, low oxidation stability, and flash point during storage. These poor physicochemical properties can be improved by different ways, such as the addition of non-edible oil. The aim of this study to analyse physicochemical properties of the biodiesel made by between WCO and Schleichera oleosa (SO). The biodiesel produced with 70:30% of WCO and SO respectively as crude oil, further introducing of different KOH-based catalyst into this oil to obtained the methyl ester. The optimum yield transesterification process are 94% with 60 min. of the reaction time, 1 wt.% KOH, and 12:1 molar ratio the methanol to oil. On the other hand, the Schleichera oleosa blend shows oxidation stability at 6.8 h and 3.3 h for Waste cooking oil methyl ester (WCME). The reduction of cold flow and, on the contrary, the flash point increase were obtained with a 70:30% ratio of WCO and SO. The cold flow properties and flash point of the fuel. Thus, mixed WCO and Schleichera oleosa oil improve the physiochemical properties such as oxidation stability, flash point, and cold flow of biodiesel without the need for synthetic antioxidants.

24 November 2023 in Automotive Experiences
Verified
Journal Article
Open access
PDF file
SSSuherman Suherman
Suherman Suherman
IAIlmi Abdullah
Ilmi Abdullah
MSM. Sabri
M. Sabri
MTMuhammad Turmuzi
Muhammad Turmuzi
Arridina Susan SilitongaArridina Susan Silitonga
Arridina Susan Silitonga
MYMarnida Yusfiani
Marnida Yusfiani
Biodiesel is one of the renewable energy sources, non-fossil. The chosen feedstock should ideally be low-cost. Using waste cooking oil can reduce synthetic biodiesel's price by up to 70%. However, biodiesel has the advantage of lower heating value and higher density, causing increased fuel consumption and NOx emissions. Biodiesel has physicochemical properties such as a more significant cetane number than fossil diesel, a high flash point, and the absence of sulfur. This study identifies the potential availability of WCO as biodiesel and summarizes recent studies on the physiochemical properties of WCO biodiesel. This study also aims to clarify the use of WCO biodiesel on engine performance and exhaust emission characteristics (H.C., CO, CO2, NOx) when this biodiesel is used. Engine type and biodiesel ratio were identified for all articles. This study also discusses the effect of adding nanoparticles on engine performance and exhaust emissions in WCO biodiesel. This study also clarifies material compatibility (corrosion, wear, and friction). The corrosion rate in various types of materials and corrosion testing methods. Finally, this paper presents the opportunity for WCO biodiesel to be very feasible to reduce fossil diesel use.

31 July 2022 in IRA Jurnal Teknik Mesin dan Aplikasinya (IRAJTMA)
Verified
Journal Article
Open access
PDF file
IAIlmi Abdullah
Ilmi Abdullah
BYBagus Giri Yudanto
Bagus Giri Yudanto
ANArjanggi Nasution
Arjanggi Nasution
RARendi Andiko
Rendi Andiko
Penelitian ini mempelajari analisa performance bahan bakar biogas terhadap emisi gas buang yang dihasilkan oleh mesin generator set dan sebagai operasional genset berbahan bakar bensin menjadi berbahan bakar biogas perlu dilakukan modifikasi pada bagian karburator. Dalam reaksi pembakaran sempurna terdapat gas penghambat seperti karbon dioksida, gas pengotor seperti hidrogen sulfida, gas yang dibutuhkan pembakaran seperti oksigen dan pembakaran tidak sempurna akan menghasilkan gas monoksida. Pengujian ini dilakukan dengan menggunakan gas chromatographi pada pembebanan 0/tanpa beban, 300, 600, 900 Watt. Analisa yang dilakukan dalam penelitian ini meliputi nilai kalor yang terjadi, reaksi pembakaran, daya, torsi, tekanan efektif rata-rata, pemakaian bahan bakar spesifik, dan thermal yang terjadi pada genset. Berdasarkan hasil penelitian yang dilakukan lebih efisien menggunakan biogas hasil purifikasi untuk emisi gas buang CO2 terendah sebesar 9,1089 %, untuk O2 sebesar 16,7165 % tetapi dari segi kwalitas pembakaran bensin lebih baik digunakan daripada biogas disebabkan kandungan unsur karbon bensin lebih tinggi.

30 November 2024 in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Verified
Journal Article
Open access
PDF file
EEEswanto Eswanto
Eswanto Eswanto
SSSiman Siman
Siman Siman
MPMuhammad Nuh Hudawi Pasaribu
Muhammad Nuh Hudawi Pasaribu
SSSuherman Suherman
Suherman Suherman
IAIlmi Abdullah
Ilmi Abdullah
MHMohd Adnin Hamidi
Mohd Adnin Hamidi
Water is one of the energy sources that has the potential to contribute to replacing energy from fossil materials. This research focuses on picohydro scale hydropower, namely water-based electricity generation as a turbine driving source. Picohydro-scale hydropower is an important part to implement, because the system is not difficult to implement. The aim of the research is to determine the performance of the pico-hydro renewable power plant in terms of the number of turns of the turbine blade screw. The research method was carried out by direct experimentation from a device that had been made using water fluid which was circulated in a closed cycle in pico-hydro hydropower. In the initial stage of the research, drawing designs were carried out, after validation, the tool manufacturing process was carried out. After completion of the manufacturing process, it continues with the testing and measurement process to obtain the desired data. Measurements start from the water flow produced, turbine shaft rotation, transmission rotation, load and power produced. The test model consists of variations in the number of screw turns, namely 9 turns, 11 turns and 13 turns. The results of this research are from data processing and are contained in the discussion obtained under certain operational conditions and discharges ranging from 2 m3/h to 30 m3/h in driving a screw turbine. However, the results obtained are still different, which can be seen in the trend lines in the graphic illustration. The performance in this research can be described in the highest power results reaching 434 Watts with a rotation of 298 rpm at a flow rate of 30 m3/h on a test model with 11 screw winding. This condition is the best result compared to other test models, which is possible because due to several factors, such as being too heavy for an increasing number of screws, uneven distribution of the water fluid flow that pushes the turbine blades.

31 January 2025 in Journal of Advanced Research in Applied Sciences and Engineering Technology
Verified
Journal Article
Open access
PDF file
SLSudirman Lubis
Sudirman Lubis
FNFarel Hasiholan Napitupulu
Farel Hasiholan Napitupulu
IAIlmi Abdullah
Ilmi Abdullah
TSTulus Burhanuddin Sitorus
Tulus Burhanuddin Sitorus
MKMalik Abdul Karim
Malik Abdul Karim
A cooling tank functions as a heat exchanger utilising water as the working fluid material, while air facilitates water cooling through direct contact, inducing partial water evaporation. The cooled water circulates within the hollow roof, aiming to absorb heat along its path. This paper undertakes a comparative analysis of four roof structures integrating composite layers to discern the most efficient and superior option. The assessment encompasses performance evaluation, thermal insulation properties, environmental resistance, heat absorption capability, energy efficiency, and economic feasibility of the composite layers applied to the roofs. The study aims to determine the effectiveness of the heat transfer rate within the hollow roof, ascertain the hourly energy discharge potential from the cooling water tank, and identify the requisite water flow to supply the hollow roof. Based on the experimentation, Roof 3 exhibited the highest room temperature, followed by Roof 1, Roof 4, and Roof 2. Ultimately, it was observed that Roof 2 possesses a superior ability to absorb heat energy from sunlight compared to other materials.

7 November 2024 in Mechanical Engineering for Society and Industry
Verified
Journal Article
Open access
PDF file
IAIlmi Abdullah
Ilmi Abdullah
SSSuherman Suherman
Suherman Suherman
EFErna Frida
Erna Frida
Nurin Wahidah Mohd ZulkifliNurin Wahidah Mohd Zulkifli
Nurin Wahidah Mohd Zulkifli
JJJufrizal Jufrizal
Jufrizal Jufrizal
This study explores the growing field of biolubricants as sustainable alternatives to petroleum-based lubricants. This paper highlights the gap in the current literature regarding biolubricants from Waste Cooking Oil (WCO) using a mixed-methods approach of bibliometric analysis and systematic literature review (SLR). A bibliometric analysis was conducted using data from the Scopus database, covering 650 publications from 2000 to 2024. Furthermore, a systematic literature review provides a comprehensive analysis of the methods used for synthesizing biolubricants from WCO, particularly evaluating the types of catalysts and methods employed that influence the physicochemical properties. The findings show a significant increase in research activity from 2018 to 2022, with Malaysia and India leading in this area. Key research trends identified include catalysts, oxidation stability, and transesterification processes. Optimal conditions for biolubricant production from WCO were achieved using an Amberlyst catalyst at 81°C, yielding a 99% conversion rate. These results highlight the potential of WCO-derived biolubricants to support more sustainable industrial applications. This study is the first to combine bibliometric analysis and systematic literature review methods to provide a comprehensive overview of research on WCO-based biolubricant production. Through a systematic review of existing studies, this research provides a useful resource for industry professionals and renewable energy policymakers in their efforts.