In recent years, the presence of numerous xenobiotic substances, such as antibiotics, has been detected in water environments. They can be considered as environmental contaminants, even if their effect on human health has yet to be totally understood. Several approaches have been studied for the removal of these kinds of pollutants. Among these compounds, tetracycline (TC), a broad-spectrum antibiotic, is one of the most commonly found in water due to its widespread use. In the context of reducing the presence of TC in aqueous solution, in this contribution, a composite catalyst based on zinc oxide (ZnO) and iron oxide (γ-Fe2O3) was developed and its photocatalytic properties were investigated. The catalytic materials were synthesized by a microwave-assisted aqueous solution method and characterized by Field Emission Scanning Electron Microscope (FESEM), X-Ray Fluorescence (XRF) and Brunauer−Emmett−Teller (BET) analysis. The TC concentration was evaluated by spectrophotometer measurements at specific time intervals. The performed photocatalytic experiments clearly demonstrated that the ZnO/γ-Fe2O3 composite catalyst presents significant photocatalytic activity, indeed a TC degradation efficiency of 88.52% was registered after 150 min. The presence of iron oxide in the structure of the catalyst enhances both the surface area and the pore volume, facilitating the adsorption of the analyte on the surface of nanostructures, a fundamental phase to optimize a photodegradation process. Moreover, ZnO was found to play the key role in the photocatalytic process assisted by γ-Fe2O3 which enhanced the TC degradation efficiency by 20%.
High-speed metal-semiconductor-metal (MSM) photodetectors based on Schottky-contacted core/shell GaAs/AlGaAs and bare GaAs nanowires were fabricated and characterized. The measured core/shell temporal response has a full-width at half-maximum and an estimated corrected value less than 5 ps. The bare GaAs devices exhibit a slower response along with a slow decaying persistent photocurrent . The core/shell devices exhibit significantly improved dc and high-speed performance over bare nanowires and comparable performance to planar MSM photodetectors. The picosecond temporal response, coupled with picoampere dark current, demonstrate the potential for core/shell nanowires in high-speed imaging arrays and on-chip optical interconnects.
25 August 2005 in The Journal of Physical Chemistry B
Au-catalyzed self-assembly of GaAs nanowires on GaAs by metalorganic vapor phase epitaxy is reported between 375 and , using tertiarybutylarsine and trimethylgallium in . The nanowires are aligned and kink-free. Below the nanowires have narrow base diameter distributions, closely matching the size of the Au nanoparticles at their tip (no tapering). Above the nanowires show a hexagonal-based pyramidal shape with base edges normal to the in-plane substrate directions and base diameters which increase exponentially with temperature, indicating a kinetics limited growth along the nanowire sidewalls. Activation energies in the range of were estimated for growth along both the sidewalls and the direction.
Optical reflection, transmission, and absorption in arrays of GaAs and GaAs/AlGaAs core-shell nanowires are studied using transfer matrix and photonic bandgap formalisms, analyzing the effects of size, geometry, height, packing density, and polarization. Energy dependence of the spectra demonstrates optical modes in the dielectric, similar to guided resonant modes, and also the air bands. Simulation of polarization dependence verifies higher absorption with the electric field along the wire axis. Higher absorption at much lower volume compared to thin film, combined with excellent charge transport, make core-shell nanowire arrays excellent candidates for optoelectronics applications.