Shijia Wang

Dr. Shijia Wang

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 March 2020 in IEEE Access
Verified
Journal Article
Open access
SWShijia Wang
Shijia Wang
Shibo WangShibo Wang
Shibo Wang
The shearer positioning method with an inertial navigation system (INS) is feasible in a longwall mining face. However, INS error greatly increases with time, which reduces the shearer positioning accuracy. This study aims to improve the shearer positioning accuracy using the shearer motion constraints. Firstly, according to the longwall mining method, two constraints on the shearer velocity and position were obtained. Then, velocity constraint information and position constraint information were modeled to obtain the observation equations in the filter. In order to improve the shearer positioning accuracy, an information filter was utilized to integrate the velocity constraint information and position constraint information. Finally, an experiment was performed to validate the effectiveness of the proposed algorithm. The result showed that the shearer positioning accuracy improved by 56% in the east and 54% in the north.

24 January 2024 in Analytical Chemistry
Verified
Journal Article
Closed access
MSMingqian Suo
Mingqian Suo
YFYiqian Fu
Yiqian Fu
SWShijia Wang
Shijia Wang
SLSiqi Lin
Siqi Lin
JZJiahui Zhang
Jiahui Zhang
XWXiuhong Wang
Xiuhong Wang

1 January 2017 in The Journal of Engineering
Verified
Journal Article
Open access
PDF file
SWShijia Wang
Shijia Wang
SLShaoqi Lu
Shaoqi Lu
YHYuqiang Hou
Yuqiang Hou
FLFusuo Liu
Fusuo Liu
Zheng XuZheng Xu
Zheng Xu
At present, the main control strategies for HVDC projects are derived from the ABB strategy and the SIEMENS strategy. In this paper, the difference between the two strategies in dealing with the inverter side ac fault is firstly analysed. It is pointed out that commutation failure (CF) with the SIEMENS strategy lasts longer than that with the ABB strategy, for the reason that the SIEMENS strategy still relies on PI regulation during the fault period and its response speed is relatively slow compared to the decreasing rate of the extinction angle. Then, a compound phase‐shifting control is proposed for the SIEMENS strategy, including control considering the rising rate and magnitude of dc current as well as control considering both unbalance and magnitude of ac voltage. The simulation results show that the application of the compound phase‐shifting control contributes to shortening the duration of CF, as well as improving power recovery and system response after fault cleared.

9 November 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
WDWeiwei Dai
Weiwei Dai
SWShijia Wang
Shijia Wang
Shibo WangShibo Wang
Shibo Wang
The shearer positioning method is of great significance to the automation of longwall mining. The research teams in the Longwall Automation Steering Committee (LASC) of Australia and China University of Mining and Technology (CUMT) have focused on shearer positioning and identified the shearer inertial navigation system, the measurement of longwall retreat and creep displacement, and the backward calibration of the shearer trajectory as three key technologies to obtain accurate shearer positioning information. In underground environments without GPS, due to the characteristics of inertial navigation system (INS) autonomous full-parameter navigation, shearer positioning based on INS is adopted by the LASC and CUMT, and error reduction algorithms are proposed to inhibit the rapid error accumulation of INS. In order to obtain the periodic calibration information when the shearer reaches the end of the longwall face, it is necessary to measure the retreat and creep displacements in order to back-correct the shearer trajectory. Finding a suitable measurement method for this task is challenging, especially in the presence of dust and moisture. The LASC used a scanning laser and FMR 250 microwave radar to measure these two displacements, while CUMT adopted an ultra-wideband (UWB) radar. In terms of the backward calibration method, minimum-variance fixed-interval smoothing (MFS) proposed by LASC and the global optimization model (GOM) for the shearer trajectory from CUMT are described in detail. The experiment demonstrates that the GOM outperforms MFS in terms of accuracy but requires more computational resources. Therefore, our next research objective is to develop an efficient and accurate algorithm for performing backward calibration on the shearer trajectory.

7 August 2023 in IEEE Transactions on Automation Science and Engineering
Verified
Journal Article
Closed access
SWShijia Wang
Shijia Wang
Shibo WangShibo Wang
Shibo Wang
The longwall retreat and creep displacements are two important parameters for the safety production in underground coal-mine. At present, the problem restricting the displacements measurement of longwall retreat and creep is mainly the influence of coal dust and water vapor at the end of longwall face. Therefore, this paper introduces UWB radar imaging method with strong imaging capability all day and all weather to measure the longwall retreat and creep displacements. That is, the radar moves along the slide-way mounted on the head of armored face conveyor (AFC) to scan the bolt plates fixed in the roadway. Two images obtained before and after the longwall face movement are matched to acquire displacements. The data processing has two steps: radar imaging and image registration. First, according to the signal model of synthetic aperture radar (SAR), the modified range-doppler (RD) algorithm with the fourth-order range model is derived to obtain near-field high-resolution image. Second, on the basis of SAR-scale invariant feature transform (SARSIFT) algorithm, this paper replaces Gaussian filter (GF) with bilateral filter (BF) to remove the speck noise, and designs an principal component analysis-improved feature matching (PCAIFM) algorithm to eliminate the wrong matching points. Therefore, the proposed image registration algorithm is called BF-SARSIFT-PCAIFM. According to the correct-match pairs, the similarity transformation model is calculated to acquire the information of retreat and creep displacements. The simulation experiment in building corridor and field test in underground coal mine are carried out, and the results show that the measurement errors of these two displacements are less than 10 mm. Note to Practitioners —The sliding up and down of mining equipment along longwall face, called the longwall creep phenomenon, often occurs during the mining processing, which may cause the roof falling accident, affect the overall advancement of longwall face, and so on. In addition, if the measured retreat displacement is larger or smaller than the normal value, the safety risk may arise and the mining efficiency would be reduced. Therefore, the monitoring of longwall retreat and creep displacements is an urgent problem to be solved. This paper proposes the UWB radar imaging method to measure the retreat and creep displacements. Due to its imaging capacity all-day and all-weather, UWB radar imaging method has the potential for application in underground coal-mine. The experiment results performed in this paper verify the effectiveness and practicability of the proposed method. However, because the two-dimensional (2D) radar image has only range and azimuth resolutions and not height, the radar movement route must be in the same horizontal plane as bolt plates to be scanned, which increases the difficulty of practical application. In addition, the scanning mode of radar linear motion is unsuitable for underground limited space. Therefore, UWB radar three-dimensional (3D) imaging method under new scanning mode is the focus of our next research.

11 May 2020 in Mathematical Problems in Engineering
Verified
Journal Article
Open access
PDF file
SWShijia Wang
Shijia Wang
Shibo WangShibo Wang
Shibo Wang
WLWanli Liu
Wanli Liu
The measurement of longwall retreat and creep displacements is of great significance for the safety production of a coal mine. In order to reliably and accurately obtain the longwall retreat and creep displacements, this paper proposes an ultrawideband (UWB) radar imaging method. The bolt plates fixed in the roadway coal wall are imaged as the target points. First, a signal model is built, and a modified nonlinear chirp scaling (NLCS) imaging algorithm is designed to obtain the high-resolution image. Then, the retreat and creep displacements are estimated based on the imaging results. Finally, simulation and experiment are performed. The simulation results show that the radar imaging method is theoretically feasible to measure the retreat and creep displacements. The measurement errors in the experiment are 0.058 m and 0.040 m, respectively. In the experiment, the radar velocity fluctuation and signal attenuation cause the target azimuth and range errors in the imaging results, which makes the measurement errors in the experiment larger than that in the simulation. This method requires no additional roadway information except for the bolt plates fixed in the coal wall. In addition, the signal propagation of UWB radar is rarely affected by the dust and moisture in the harsh environment.