Feng Qin

Mr. Feng Qin


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 March 2024 in Materials
Verified
Journal Article
Open access
PDF file
YZYongqiang Zhang
Yongqiang Zhang
PZPeng Zhao
Peng Zhao
YTYiqi Tong
Yiqi Tong
HDHonggang Dong
Honggang Dong
JZJun Zhou
Jun Zhou
Peng LiPeng Li
Peng Li
In recent years, for the structural characteristics and design requirements of the integral rotor and disc shaft of the integrated engine, the welding quality and mechanical properties of superalloy weldments have received increasing attention. In this paper, inertia friction welding (IFW) of FGH96 alloy was carried out using different welding parameters, and the homogeneous connection of FGH96 alloy hollow bars was successfully realized. The microstructure evolution, mechanical properties and fracture failure of the welded joints at room and high temperatures were investigated. The FGH96 alloy IFW joints were divided into the weld nugget zone (WNZ), the thermo-mechanically affected zone (TMAZ), the heat-affected zone (HAZ) and the base metal (BM), and there were significant differences in grain structure and distribution of the γ′ phase in each of the characteristic zones. The microhardness and tensile properties of the IFW joints were investigated, and the results showed an “M”-shaped curve in the microhardness distribution, with the lowest point of hardness observed in the HAZ. The tensile test results indicated that the fracture position moved from the BM to the WNZ with the increase in temperature, the microstructure at the fracture changed significantly and the tensile strength decreased from 1512.0 MPa at room temperature to 1201.3 MPa at 750 °C. The difference in the mechanical properties of the joints was mainly attributed to the changes in the dissolution and precipitation of the γ′ phase.

9 September 2023 in Metals
Verified
Journal Article
Open access
PDF file
JZJun Zhou
Jun Zhou
YWYanquan Wu
Yanquan Wu
CZChunbo Zhang
Chunbo Zhang
WLWu Liang
Wu Liang
RLRui Li
Rui Li
FQFeng Qin
Feng Qin
The welded joint of a dissimilar titanium alloy was obtained via inertial friction welding technology. The characteristics of the bonding interface and the microstructure of the welded joint were investigated via optical microscopy, scanning electron microscopy and electron backscattered diffraction. The results show that fine, equiaxed grains and interdiffusion bands of the elements Mo and Sn were formed in the weld zone under the high temperature and plastic deformation of the inertial friction welding. The weld zone and thermo-mechanically affected zone formed ⟨1¯21¯0⟩ α texture and ⟨111⟩ β texture, respectively.

10 November 2023 in Materials
Verified
Journal Article
Open access
PDF file
FQFeng Qin
Feng Qin
XZXinmeng Zhang
Xinmeng Zhang
CZChunbo Zhang
Chunbo Zhang
YWYanquan Wu
Yanquan Wu
WLWu Liang
Wu Liang
JZJun Zhou
Jun Zhou
As a major load-bearing component of trains, the weld quality of the bogie beam is critical to the safety of railway operations. This study specifically investigates the inertia friction welding process of S355 bogie crosshead tubes, with the aim of improving the weld quality and achieving one-time formation of the crosshead tube and tube seat. The microstructural features and mechanical properties of S355 inertia-welded joints were also compared with the base metal. Research indicates that inertia friction welds have no visible defects, and that the microstructure of the welding seam (WS) consists of granular bainite, acicular ferrite and little pearlite. The thermo-mechanically affected zone (TMAZ) consists of granular bainite bands and ferrite + pearlite bands. The hot work strengthening mechanism of inertia friction welding results in a higher level of hardness for both WS and TMAZ. The tensile property of the welded joints can be compared to the base metal. The yield strength, tensile strength and elongation of the welded joints, respectively, reach 87.5%, 100% and 79.5% of S355. However, the impact toughness of the welds at room temperature is lower than that of the base material, particularly in the TMAZ zone. Conversely, in an environment with a temperature of −40 °C, WS’s impact toughness surpasses that of the parent material.

7 January 2026 in Frontiers in Materials
Verified
Journal Article
Open access
PDF file
YWYanquan Wu
Yanquan Wu
FQFeng Qin
Feng Qin
CZChunbo Zhang
Chunbo Zhang
ZWZhiyong Wang
Zhiyong Wang
RLRui Li
Rui Li
JZJun Zhou
Jun Zhou
Introduction: Inertia friction welding (IFW) has emerged as a critical solid-state joining technology for manufacturing high-performance steel pistons in heavy-duty diesel engines, particularly where complex hollow geometries and stringent reliability requirements preclude conventional fusion welding. However, its application to large-scale components—such as pistons exceeding 450 mm in diameter—remains underexplored, especially regarding the interplay among joint geometry, thermal–mechanical history, and resulting microstructure–property relationships. Methods: This study demonstrates the successful IFW of a Ø480 mm forged 42CrMo steel piston. A systematic investigation was conducted on the microstructural evolution and mechanical integrity of both the inner (thick-walled) and outer (thin-walled) weld zones, leveraging metallographic analysis, hardness testing, and tensile characterization to correlate processing conditions with performance outcomes. Results: Geometric asymmetry between the thick inner and thin outer walls induced markedly different cooling rates during welding, leading to distinct microstructures and mechanical responses. Both weld zones exhibited excellent tensile ductility; however, their strength–ductility trade-offs were microstructurally governed. The inner weld showed localized embrittlement due to rapid cooling-induced banded phases and grain-boundary carbides, whereas the outer weld benefited from more favorable thermal conditions that promoted dynamic recrystallization and phase stability. Consistent flash formation across both interfaces confirmed robust process control. Discussion: These findings validate the technical feasibility of scaling IFW to large-diameter steel pistons for next-generation heavy-duty engines. Moreover, they highlight how joint geometry directly influences thermal management during welding, thereby offering a design lever to tailor microstructure and mechanical performance. This work provides fundamental insights to support the broader adoption of solid-state welding in high-value, safety-critical powertrain applications.