Intraplate earthquakes induced by anthropogenic fluid injection present unexpected seismic risk to previously quiescent or low seismicity-rate regions. Despite many studies of induced seismicity, there are relatively few with detailed openly accessible constraints on the interaction between seismic sources and subsurface structures. In this study of the Raton Basin, we refine source observations from a dense nodal array and constrain basin structure using teleseismic receiver functions. The cross-correlation-based relocated hypocentres and a new set of focal mechanisms light up active fault segments and show clear spatiotemporal patterns. The geometric complexity of reactivated fault clusters appears greatest near higher rate injection wells. Simpler normal fault structure is found farther from injection wells and near abrupt structural transitions suggested by receiver functions. While less induced seismicity in the crystalline basement is expected when injection is >1 km from the top of the basement (like Raton), our receiver function analysis identified a basin thickness ~3 km beneath the nodal array and lateral variations in sedimentary structures. Our results explain potential fluid connectivity between the injection depths focused at ~1–1.5 km below the surface and basement fault activity that begins at ~3 km and reaches peak activity at ~4–8 km depths. This article is part of the theme issue ‘Induced seismicity in coupled subsurface systems’.
We examine the coseismic influence of the 5 July 2019, MW7.1 Ridgecrest and the 24 June 2020 MW5.8 Owens Lake earthquakes on rockfall distributions in two undisturbed high-altitude areas of the southern Sierra Nevada Mountains, California, USA. These events occurred within the geologically recent (<2 Mya) Walker Lane/eastern California shear zone. While both study areas are characterized as plutonic, the Owens Lake event largely affected terrain that was formerly glaciated and oversteepened while the Ridgecrest event affected non-glaciated terrain. Our inventory of rockfall locations was derived from analysis of Sentinel-2 images acquired just prior to and immediately after the events. This difference mapping approach using readily-available Sentinel-2 imagery allows for rapid rockfall and landslide mapping. GIS analysis shows that even though the total area assessed for both earthquakes was similar (~1500 km2), the significantly lower magnitude Owens Lake event produced nearly twice as many (102) mappable rockslides as the significantly stronger Ridgecrest event (58), a difference likely due to slope oversteepening in the formerly glaciated area. Significant seismic amplification by topography and reactivation of preexisting failures was apparent for both areas. Inclusion of these factors may improve failure predictions and rockfall probability estimation.
In February 2019, 302 nodal seismometers were deployed every 1 km along the Parks Highway in Alaska, from Nenana to Trapper Creek, for a period of 35 days. Concurrently, 95 seismometers were deployed away from the highway, in a 1.3 km array spanning the Denali fault. The Parks Highway seismometers recorded a variety of signals, including from local, regional, and teleseismic earthquakes, mining blasts, helicopters, planes, trains, and automobiles. Our overarching goal is to characterize the seismic soundscape for this region, composed of source types—defined by durations and frequency ranges—as well as temporal and spatial variations in ambient noise. We present several novel observations for this region, including air-to-ground coupled waves from mining blasts, loaded-versus-unloaded trains, the noise produced by a river frozen at its surface, and the influence of sedimentary basin structures on ambient noise. This documentation of events and noise provides a step toward quantifying the seismic soundscape, establishing distance-based detection limits for different source types, and providing guidance for future detailed studies and deployments in Alaska.
27 October 2020 in Bulletin of the Seismological Society of America
The complex postdetonation geologic structures that form after an underground nuclear explosion are hard to constrain because increased heterogeneity around the damage zone affects seismic waves that propagate through the explosion site. Generally, a vertical rubble‐filled structure known as a chimney is formed after an underground nuclear explosion that is composed of debris that falls into the subsurface cavity generated by the explosion. Compared with chimneys that collapse fully, leaving a surface crater, partially collapsed chimneys can have remnant subsurface cavities left in place above collapsed rubble. The 1964 nuclear test HADDOCK, conducted at the Nevada test site (now the Nevada National Security Site), formed a partially collapsed chimney with no surface crater. Understanding the subsurface structure of these features has significant national security applications, such as aiding the study of suspected underground nuclear explosions under a treaty verification. In this study, we investigated the subsurface architecture of the HADDOCK legacy nuclear test using hybrid 2D–3D active source seismic reflection and refraction data. The seismic data were acquired using 275 survey shots from the Seismic Hammer (a 13,000 kg weight drop) and 65 survey shots from a smaller accelerated weight drop, both recorded by three‐component 5 Hz geophones. First‐arrival, P‐wave tomographic modeling shows a low‐velocity anomaly at depth, likely an air‐filled cavity caused by partial collapse of the rock column into the temporary postdetonation cavity. A high‐velocity anomaly between 20 and 60 m depth represents spall‐related compaction of the shallow alluvium. Hints of low velocities are also present near the burial depth ( ). The reflection seismic data show a prominent subhorizontal reflector at depth, a short‐curved reflector at , and a high‐amplitude reflector at depth. Comparisons of the reflection sections to synthetic data and borehole stratigraphy suggest that these features correspond to the alluvium–tuff contact, the partial collapse cavity, and the spalled layer, respectively.
We conduct a high-resolution teleseismic receiver function investigation of the subducting plate interface within the Alaskan forearc beneath Kodiak Island using data collected as part of the Alaska Amphibious Community Seismic Experiment in 2019. The Kodiak node array consisted of 398 nodal geophones deployed at ~200-300 m spacing on northeastern Kodiak Island within the southern asperity of the 1964 Mw9.2 Great Alaska earthquake. Receiver function images at frequencies of 1.2 and 2.4 Hz show a coherent, slightly dipping velocity increase at ~30-40 km depth consistent with the expected slab Moho. In contrast to studies within the northern asperity of the 1964 rupture, we find no evidence for a prominent low-velocity layer above the slab Moho thick enough to be resolved by upgoing P-to-S conversions. These results support evidence from seismicity and geodetic strain suggesting that the 1964 rupture connected northern (Kenai) and southern (Kodiak) asperities with different plate interface properties.