The investigation results for the fine dispersion of the prerefined oxides of rare-earth elements using electric discharges in an aqueous medium are presen

Water treatment, such as disinfection, is an integral stage of its use for human life. The use of plasma technology with high-voltage electric discharge in a liquid for obtaining a bactericidal effect is discussed. It has been experimentally shown that among the factors accompanying a high-voltage electric discharge in a liquid and affecting the viability of bacteria, cavitation is the main one. Simultaneous use of electric discharge in the special cavitation mode and oxidizing agents makes it possible to achieve stable disinfection of water. At the same time, bactericidal doses of the oxidizing agent are reduced by a factor of 10 relative to existing standards, and the energy costs for electric discharge exposure, enhanced by small doses of an oxidizing agent, are reduced by 6 times compared to the costs of disinfection by only an electric discharge.

An analysis of the physical and chemical phenomena accompanying electrical discharges is carried out, and the main factors influencing microorganisms’ abatement are studied. The similarity of the cavitation processes in water systems induced by underwater electric discharges and ultrasound is experimentally demonstrated. The characteristic features of electrical discharge in the cavitation mode, providing effective water disinfection with electric discharges with a significantly reduced amount of active chlorine, are identified in order of importance. The inactivation of microorganisms is intensified, firstly, by the generation of chemically active particles from the water medium itself, due to the integral action of the electro-discharge cavitation of the whole treated volume, and by local shock waves, acoustic flows, and ultraviolet radiation in the area near the cavitating bubbles. The main advantages of electric discharge cavitation over ultrasonic range are the wider range of high-frequency acoustic radiation inherent in an electric discharge, the high intensity and power of the cavitation processes, and the possibility of a significant increase in the volume of disinfected liquid. This study allows for a better understanding and prediction of the bacterial effects that occur during a high-voltage underwater electrical discharge.

The article deals with the study of factors participating in the extraction of humic acids from plant substrates under the action of electric discharges. U

The electric discharge in special cavitation mode is an effective instrument for water disinfection, intensification of extraction, and material dispersion. The object of this work is to study the influence of individual elements and characteristics of electric discharge installations on the...

Increasing the energy efficiency of production processes is closely related to minimizing the impact on the environment and is one of the priorities of the concept of sustainable development. Electric discharge is an effective tool for multilevel grinding of non-metallic materials in various working fluids and obtaining coarse and fine suspensions. We introduce the technique for calculating the electrotechnological parameters necessary for energy-efficient electric discharge dispersion. This technique considers the strength characteristics of the crushed material (dispersed phase) and the electrical conductivity of the working fluid (dispersed medium). It is also essential to consider the energy stored in the capacitor bank, the energy criterion, the critical value of the working fluid’s electrical strength, the radius of the high-voltage electrode point, and the distance from the discharge channel axis to the disintegration object. All this allows obtaining a given granulometric composition of the dispersed phase with minimal energy consumption. Experiments confirmed the validity of the proposed calculation technique. We obtained the water-brown coal suspension with a given dispersion two times faster and consumed four times less energy in comparison with the known methods that did not take into account the electrical conductivity of the working liquid and the mechanical strength of the crushed material.