The supersonic molecular beam injection (SMBI) technique is widely used in magnetic fusion devices for plasma fueling and active control of particles. The beam flow formed by the SMBI system is directly visualized by a newly established schlieren diagnostic system on the SMBI testing platform. This schlieren system could provide a 2D density distribution of the beam with the sub-mm spatial resolution by detecting the change in the refractive index of the medium caused by the SMBI in the low-pressure vacuum chamber. The structure and the divergence angle of the supersonic molecular beam for fusion plasma fueling are first measured. Additionally, the density profile of the supersonic molecular beam is reconstructed from the measured light intensity by the schlieren system. The experimental comparison between the standard nozzle and the optimized nozzle of the SMBI system shows the great potential of the diagnostic system in optimizing the beam characteristics.
An intrinsic evolution in the decoupling–coupling–decoupling (DCD) of the electron density and temperature responding to the magnetic field change is observed in a cylindrical laboratory plasma device. Experimental results show that the density and the temperature decouple in the low magnetic field, couple with higher magnetic field, and decouple again with a continuous magnetic field increase. An element physical picture of the DCD regime is unraveled based on the analyses of gradient lengths, the turbulence propagation directions, the turbulence spatial scales, and the relationship between the normalized collision rates and the poloidal mode numbers.
An O-mode microwave reflectometry system has been developed to measure the density fluctuation on Zheda Plasma Experiment Device (ZPED). The microwave frequency range of this diagnostic system is from 10 GHz to 18 GHz, corresponding to the cutoff densities from 0.13×1019m-3 to 0.4×1019m-3. The density fluctuations are measured with a fixed microwave frequency for plasma in different magnetic field. It has been observed that the density fluctuation power changes with the magnetic field nonlinearly: the density fluctuations increase linearly with the magnetic field when the magnetic field is less than the critical magnetic field, while almost no change when the magnetic field is larger than the critical magnetic field.
We report the experimental results on the turbulence energy transfer in a cylindrical laboratory plasma based on the data obtained by a set of quadruple Langmuir probe on Zheda plasma experiment device. The turbulence energy transfer is directly embodied in the alternating change in the fluctuation amplitudes between the low frequency turbulence at ∼0.1–0.2 kHz and the drift wave (DW) turbulence at ∼1–2 kHz. The estimation of the radial electric field and the bispectral analysis of the experiments suggest that the DW turbulence gains the energy from the low frequency turbulence with the magnetic field increase. The energy transport due to the interaction between the low frequency turbulence and the DW turbulence is a possible reason to drive the turbulence energy transfer associated with the magnetic field increase in the laboratory plasma.
1 November 2025 in Review of Scientific Instruments
A two-photon absorption laser induced fluorescence (TALIF) diagnostic system is designed for measuring the density of deuterium atoms in the scrape-off layer (SOL) region of the Huanliu-3 (HL-3) tokamak. The system employs laser pulses at 10 Hz with an energy of 10 mJ per pulse (pulse width <8 ns) at 205 nm. To enhance the fluorescence intensity, a semi-confocal lens was designed to achieve a relatively large solid angle for fluorescence collection. A calibration experiment was conducted, establishing the relationship between fluorescence intensity and atomic deuterium (D) density using krypton (Kr) atoms as a reference. Experimental verification of the whole TALIF system has been successfully performed in a plasma environment. The feasibility of the TALIF for the measurements of the neutral particles is discussed, and an experimental result in the HL-3 tokamak edge plasma region is shown in this paper.