This article presents the mineralogical and chemical characteristics of zinc and lead smelting slags, with particular reference to the slags formed during the simultaneous production of Zn and Pb by the Imperial Smelting Process. These slags, because of the presence of many metals in their composition, mainly in the form of crystalline phases, are a valuable source for their extraction. Slags from Zn-Pb metallurgy are processed on an industrial scale using pyrometallurgical and hydrometallurgical methods, alongside which a number of experiments conducted to recover metals as efficiently as possible, including bioleaching experiments.
Cenospheres, which are the by-product of hard coal combustion, are characterized by properties allowing for a broad use of this material. The article presents the results of the chemical composition analysis of the cenospheres obtained from various power plants. It has been exhibited that depending on the place of origin, their chemical composition is similar and comparable to fly ash produced in hard coal combustion. A great majority of analysed cenospheres may be classified similarly as the sialic ashes—slightly acidic. The analysis of dependence of refractoriness of the cenospheres on their chemical composition confirmed the correlation between this parameter and the content of SiO2 and Al2O3. At the same time, the content of each of the chemical components indicates a correlation with the size of the cenospheres. A trend of SiO2/Al2O3 ratio decreasing along with the increasing size of the cenospheres has been noted. Also the content of K2O and—to a lesser extent—Na2O decreases along with increasing diameter of grains. An inverse correlation was noted in case of Fe2O3. The higher the diameter of the grains, the higher the content of this component. In view of the obtained results, it should be assumed that the division of cenospheres into grain-size classes before further industrial use could extent the current range of use of this material.
The aim of this study was to examine the physico-chemical and phase characteristics of ash obtained in the process of the combustion of Polish poultry manure in a laboratory reactor with a bubbling fluidized bed. Three experiments, differing in the grain size and morphology of the raw material, the method of its dosing and the type of fluidized bed, were carried out. The contents of the main chemical components and trace elements in the obtained ash samples were determined using WDXRF, and the phase composition was examined through the XRD method. The morphology and the chemical composition of grains in a given micro-area using the SEM/EDS method were also investigated. The highest concentration of phosphorus (from 28.07% wt. to 29.71% wt. as P2O5 equivalent), the highest proportion of amorphous substance (from 56.7% wt. to 59.0% wt.) and the lowest content of unburned organic substance (LOI from 6.42% to 9.16%) (i.e., the best process efficiency), was obtained for the experiment in which the starting bed was quartz sand and poultry manure was fed to the reactor in the form of pellets. It has been calculated that in this case, the amorphous phase contains more than half of the phosphorus. The method of carrying out the combustion process has a significant impact on the phase composition and, consequently, on the availability of phosphorus.
The paper presents the characteristics of products annealing at the temperatures of 2400 and 3000 °C of unburned carbon from coal fly ash in terms of its possible use as a starting material in the graphitization process. An amorphous substance (organic substance) with an admixture of some minerals has been found in samples subjected to graphitization. However, the graphite phase is dominant in products subjected to graphitization. Studies have also shown a diverse grain morphology in individual samples. The presence of plate-shaped and tube-shaped grains was found. As the graphitization temperature of the starting material increases (2400 and 3000 °C), the specific surface area in the graphitization products decreases. The total pore volume in the samples after the graphitization process was significantly lower than the pore volume of active carbons produced from other unburned carbon. Average pore diameter is similar to the pore diameter in active carbons. The reflectance value of the matrix for the sample graphitized at 3000 °C is characteristic for graphite. Unburned carbon from Polish fly ash can be used as the starting material for graphitization.
17 April 2023 in Case Studies in Construction Materials