Zhang Tao

Dr. Zhang Tao


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 December 2017 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
LMLihong Mo
Lihong Mo
XZXiaoyong Zhu
Xiaoyong Zhu
ZTZhang Tao
Zhang Tao
LQLi Quan
Li Quan
YWYeqin Wang
Yeqin Wang
JHJuan Huang
Juan Huang
The flux-switching permanent-magnet double-rotor machine (FSPM-DRM) used for hybrid electric vehicles has attracted considerable attention due to the compact structure and high torque density. Compared with conventional machine, the FSPM-DRM suffers from more severe thermal problems in its inner rotor. This paper aims to make an accurate prediction of the performances and temperature distributions in the FSPM-DRM. First, the eddy current loss in windings with an improved analytical method is discussed and the results are validated by those from a 2-D finite-element (FE) model. With the obtained power losses, the lumped-parameter scheme considering end effect is compared with a 3-D FE thermal model to predict the temperature in each part of the FSPM-DRM at hybrid driving mode, in which both yield similar results. Then the maximum temperatures of different parts at the rated load and 160% load under various operational modes are simulated. Some experimental results are reported, validating the numerical and simulated results.

2 July 2021 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
QLQing Lu
Qing Lu
YWYeqin Wang
Yeqin Wang
LMLihong Mo
Lihong Mo
ZTZhang Tao
Zhang Tao
In order to improve the dynamic performance of the sensorless permanent magnet synchronous motor drive system, the modified pulsating high frequency voltage injection method is proposed. Firstly, the second order generalized integrator can be used to extract the high frequency voltage signal instead of band-pass filters. The specific frequency harmonic elimination unit is applied to obtain the rotor position error signal to avoid using the low-pass filter. Therefore, the system dynamic performance can be improved. In addition, the system parameter is easier to adjust than traditional methods with band-pass filters and low-pass filters. Finally, the simulation model and experimental platform are built to verify the effectiveness of the proposed method. The simulation and experimental results present that the dynamic performance of motor drive system can be improved.

10 January 2019 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
LMLihong Mo
Lihong Mo
ZTZhang Tao
Zhang Tao
QLQing Lu
Qing Lu
A fast and precise lumped-parameter thermal network (LPTN) model is presented for a flux-switching permanent-magnet double-rotor machine used for hybrid electric vehicles (HEVs), which has attracted attention due to the compact structure. The three-dimensional (3-D) LPTN model provides the steady-state thermal solution to derive the temperatures at different parts of the machine, in which the power losses of various working conditions are used as heat sources for calculating the temperatures of different operational modes. In the LPTN studies, a transformation of an irregular slot structure into a regular one is applied to simplify the calculation of the winding thermal resistance. A 3-D finite element thermal model of this machine is also established to calculate the temperatures of the main machine components for a comparative study purpose. Tests performed on the designed machine verify that the defined LPTN model has a high ability to predict the nodal temperatures accurately.

16 November 2017 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
ZTZhang Tao
Zhang Tao
XLXinfeng Liu
Xinfeng Liu
LMLihong Mo
Lihong Mo
XYXiaoting Ye
Xiaoting Ye
WNWei Ni
Wei Ni
XWXue Wang
Xue Wang
The traditional bearingless permanent magnet synchronous motor has complex decoupling control problems. To overcome the drawbacks above, a novel hybrid permanent magnet type bearingless motor (HPMTBM) is proposed in this paper, which has integrated the merits of hybrid excitation permanent magnet motor and magnetic bearings. The main advantages of this HPMTBM are the simple control mechanism and the low power consumption. First, the principle and theoretical background of this motor are introduced. Then, the mathematical models of radial suspension force and torque are established using Maxwell stress tensor method, and air-gap magnetic fields, radial suspension forces are calculated by finite-element analysis. Finally, the prototype motor is designed and constructed. The radial suspension forces and rotor radial displacements are tested. The simulation and experimental results show the feasibility of the proposed HPMTBM.

4 March 2021 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
ZTZhang Tao
Zhang Tao
JCJie Chen
Jie Chen
WZWeiguo Zhu
Weiguo Zhu
To solve the coupling between torque and suspension force in the conventional bearingless switched reluctance motor (BSRM) and improve suspension performances, the novel hybrid stator type bearingless switched reluctance motor (HSTBSRM) with double-slice structures is proposed. The torque magnetic circuit is completely independent of the suspension magnetic circuit, and the natural decoupling between the torque and suspension force is achieved. First, the structure, magnetic circuits, suspension, and rotation mechanism are analyzed. The mathematical models of radial suspension forces are deduced in detail. According to the maximum radial bearing capacity, the main parameters of the suspension part are designed. Finally, the 3-D finite-element analysis is carried out to verify the magnetic circuit, suspension mechanism, and models.

3 January 2019 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
LMLihong Mo
Lihong Mo
ZTZhang Tao
Zhang Tao
QLQing Lu
Qing Lu