In order to improve the dynamic performance of the sensorless permanent magnet synchronous motor drive system, the modified pulsating high frequency voltage injection method is proposed. Firstly, the second order generalized integrator can be used to extract the high frequency voltage signal instead of band-pass filters. The specific frequency harmonic elimination unit is applied to obtain the rotor position error signal to avoid using the low-pass filter. Therefore, the system dynamic performance can be improved. In addition, the system parameter is easier to adjust than traditional methods with band-pass filters and low-pass filters. Finally, the simulation model and experimental platform are built to verify the effectiveness of the proposed method. The simulation and experimental results present that the dynamic performance of motor drive system can be improved.
In this paper, to improve the adjustment ability of air gap flux, a new IPM synchronous machine with permeability modulation characteristics is proposed for EVs potential applications. The main trait of the machine structure is that a bridge between the rotor poles is intentionally established, and which can produce a smooth magnetic path for the leakage flux. Thus, the flux leakage state can be adjusted by controlling the magnetic saturation of the bridge according to the machine load current. To clarify this feature, the machine performances are investigated by theoretical analysis and finite element method. Finally, the designed machine is manufactured and its performances are verified by experiments. Both simulation and experimental results prove that torque of the proposed machine under loaded conditions can be flexibly adjusted by the magnetic permeability modulation without any complex control strategy.
The open-winding driving system can improve power density and torque output capacity of the motor. However, the open-winding topology with a common direct current (DC) power supply provides a path for the zero-sequence current, which contributes to the power loss but not the torque output. The zero-sequence current is produced by the common-mode voltage and zero-sequence components of the back electromotive force (EMF). For the purpose of eliminating the common-mode voltage as well as improving the utilization of DC supply voltage, a 120˚ decoupling space vector pulse width modulation strategy is adopted. Meanwhile, a proportional unit combined with second order generalized integrator (SOGI) is proposed to suppress the zero-sequence current caused by the zero-sequence components of the back EMF. A test bench is built for the experiment. The effectiveness of the proposed suppression strategy is verified by the experimental results.
14 November 2018 in IEEE Transactions on Applied Superconductivity
To reduce the volume of the five degrees of freedom (DOF) magnetic suspension system and increase the critical speed, a slice hybrid magnetic bearing (SHMB) is proposed. First, the mathematical models of the radial suspension are deduced using the equivalent magnetic circuit method based on the suspension mechanism analysis. Then, the parameters of the five DOF-SHMB are designed. The magnetic circuits are analyzed, and the relationships between the radial suspension force and the suspen-sion currents are calculated. Furthermore, the relationships be-tween the axial force and the axial offset are also calculated. Fi-nally, The experimental prototype five DOF-SHMB is designed and the suspension forces are tested. The research results have shown that the rotor can be levitated stably in five DOF.
In order to improve the performance of motor drive systems, this paper introduces a sensorless control method for interior permanent magnet synchronous motors (IPMSM) based on the rotating high-frequency voltage injection method. The demodulation method using a synchronous frequency filter (SFF) instead of a bandpass filter (BPF) and a high pass filter (HPF) is proposed. The structure and transfer function of SFFs are introduced, and their characteristics are simulated and analyzed. Therefore, the center frequency of SFFs can be adaptively adjusted according to the estimated rotational speed, which is convenient for frequency setting. Finally, according to the proposed rotating high-frequency voltage injection method, the simulation model is built. The experimental results verify that the control strategy can maintain good position estimation accuracy, better speed tracking performance and anti-load disturbance performance.
16 October 2020 in Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering
In this article, to improve the accuracy of rotor position estimation in sensorless permanent magnet synchronous motor drives, a reduced-order resonant regulator for the rotor position sliding mode observer is proposed. Since fundamental back electromotive force can be utilized to calculate the rotor position, a mathematical model for the observer is first established based on the analysis of estimation fluctuation error, where a reduced-order resonant regulator is applied to extract the fundamental back electromotive force. Then, the phase-locked loop with back electromotive force normalization is used to compute the rotor position and speed. Finally, the experimental bench of permanent magnet synchronous motor driving system is built. The experimental results verify that the proposed strategy can effectively reduce the estimation error and meanwhile improve estimation accuracy.