Ground-based high-power lasers are, in principle, able to de-orbit any kind of space debris object from the low Earth orbit (LEO) by remotely inducing laser-ablative momentum. However, the assessment of efficiency and operational safety depends on many factors, like atmospheric constraints or the risk of debris disintegration during irradiation. We analyze laser momentum for a great variety of target geometries and sizes and—for the first time in a large-scale simulation—include thermal constraints in the laser irradiation configuration. Using a coherently coupled 100 kJ laser system at 1030 nm wavelength and a 5 ns pulse duration in an optimized pointing elevation angle range, the pulse frequency should amount to less than 10 Hz to prevent fragment meltdown. For mechanically intact payloads or rocket bodies, repetition rates should be even lower. Small debris fragments sized between 10 and 40 cm can be de-orbited by employing around 100 to 400 station passes with head-on irradiation, while objects exceeding 2 m typically require far more than 1000 irradiations for de-orbit. Hence, laser-based debris removal cannot be considered a prime space sustainability measure to tackle the highest-risk large debris, yet it can provide the remediation of a multitude of small-sized debris using small networks of globally distributed laser sites.
Environmental pollution exists not only within our atmosphere but also in space. Space debris is a critical problem of modern and future space infrastructure. Congested orbits raise the question of spacecraft disposal. Therefore, state-of-the-art satellites come with a deorbit system in cases of low Earth orbit (LEO) and with thrusters for transferring into the graveyard orbit for geostationary and geosynchronous orbits. No practical solution is available for debris objects that stem from fragmentation events. The present study focuses on objects in LEO orbits with dimensions in the dangerous class of 1 to 10 cm. Our assumed method for the change of trajectories of space debris is laser ablation for collision avoidance or complete removal by ground-based laser systems. Thus, we executed an experimental feasibility study with focus on thermal and impulse coupling between laser and sample. Free-fall experiments with a 10 ns laser pulse at nominally 60 J and 1064 nm were conducted with GSI Darmstadt’s nhelix laser on various sample materials with different surfaces. Ablated mass, heating, and trajectory were recorded. Furthermore, we investigated the influence of the sample surface roughness on the laser-object interaction. We measured impulse coupling coefficients between 7 and 40 µNs/J and thermal coupling coefficients between 2% and 12.5% both depending on target fluence, surface roughness, and material. Ablated mass and changes in surface roughness were considered via simulation to discriminate their relevance for a multiple shot concept.
A conceptual study has been carried out on laser station networks to enhance Space Situational Awareness and contribute to collision avoidance in the low Earth orbit by high-precision laser tracking of debris objects and momentum transfer via photon pressure from ground-based high-power lasers. Depending on the network size, geographical distribution of stations, orbit parameters, and remaining time to conjunction, multipass irradiation enhances the efficiency of photon momentum coupling by 1–2 orders of magnitude and has the potential to eventually yield a promisingly significant reduction of the collision rate in low Earth orbit.
Depositing a reasonable amount of power ahead of a body, that is the so‐called ‘energy deposition,’ is promising for drag reduction in high‐speed flows. This paper experimentally demonstrates that by repetitively depositing laser‐pulse energies up to 80 kHz a quasi‐steady‐state active air spike is built up in the bow shock layer, and an efficiency of energy deposition of up to 600% is obtained. The drag decrease is an almost‐linear function with respect to a laser‐pulse repetition frequency.
Ground-based high-power lasers enable to, in principle, deorbit any kind of space debris object from the low Earth orbit (LEO) by remotely inducing laser-ablative momentum. However, the assessment of efficiency and operational safety depends on many factors like atmospheric constraints or the risk of debris disintegration during irradiation. We analyze laser momentum for a great variety of target geometries and sizes, and – for the first time in a large-scale simulation – include thermal constraints for laser irradiation configuration. Using a coherently coupled 100 kJ laser system at 1030 nm wavelength, 5 ns pulse duration in an optimized pointing elevation angle range, the pulse frequency should amount to less than 10 Hz to prevent fragment meltdown. For mechanically intact payloads or rocket bodies, repetition rates should be even lower. Small debris fragments sized between 10 and 40 cm can be de-orbited by around 100 to 400 station passes with head-on irradiation while objects exceeding 2 m typically require far more than 1000 irradiations for deorbit. Hence, laser-based debris removal cannot be considered a prime space sustainability measure tackling the top-risk large debris, yet it can provide for remediation of a multitude of small-sized debris using small networks of globally distributed laser sites.