Walking along a beach one may notice debris being washed ashore from the vast oceans. Then, turning your head up at night you even might noticed a shooting star or a bright spot passing by. Chances are, that you witnessed space debris, endangering future space flight in lower earth orbit. If it was possible to turn cm-sized debris into shooting stars the problem might be averted. Unfortunately, these fragments counting in the 100 thousands are not controllable. To possibly regain control we demonstrate how to exert forces on a free falling debris object from a distance by ablating material with a high energy ns-laser-system. Thrust effects did scale as expected from simulations and led to speed gains above 0.3 m/s per laser pulse in an evacuated micro-gravity environment.
When one discovers a shooting star at night, this usually means an opportunity to make a secret wish. For astronauts, this moment means that one wish has already come true: whatever could have harmed or even terminated their mission, burns up now in the atmosphere instead. Man-made space junk meanwhile poses a serious threat to any space mission—being it manned space flight or one of the numerous satellites whose usage has become part of our daily life.
Environmental pollution exists not only within our atmosphere but also in space. Space debris is a critical problem of modern and future space infrastructure. Congested orbits raise the question of spacecraft disposal. Therefore, state-of-the-art satellites come with a deorbit system in cases of low Earth orbit (LEO) and with thrusters for transferring into the graveyard orbit for geostationary and geosynchronous orbits. No practical solution is available for debris objects that stem from fragmentation events. The present study focuses on objects in LEO orbits with dimensions in the dangerous class of 1 to 10 cm. Our assumed method for the change of trajectories of space debris is laser ablation for collision avoidance or complete removal by ground-based laser systems. Thus, we executed an experimental feasibility study with focus on thermal and impulse coupling between laser and sample. Free-fall experiments with a 10 ns laser pulse at nominally 60 J and 1064 nm were conducted with GSI Darmstadt’s nhelix laser on various sample materials with different surfaces. Ablated mass, heating, and trajectory were recorded. Furthermore, we investigated the influence of the sample surface roughness on the laser-object interaction. We measured impulse coupling coefficients between 7 and 40 µNs/J and thermal coupling coefficients between 2% and 12.5% both depending on target fluence, surface roughness, and material. Ablated mass and changes in surface roughness were considered via simulation to discriminate their relevance for a multiple shot concept.
Thin-disk lasers are indispensable in photonics research as well as in a multitude of industrial applications. They represent a unique class of laser and amplifier architecture that provides kW output power with excellent properties concerning beam quality, long-term stability, thermal management, and power scalability. For many applications, a reduced complexity of the laser and its size would be highly beneficial. The necessary multipass transitions in thin-disk lasers and amplifiers typically require sophisticated multi-mirror arrangements. Here, we present a monolithic version of the pump concept for thin-disk lasers and amplifiers, where the thin disk is replaced by a thin, wedged gain medium acting as a wedged optical trap. The wedge is coated in a peculiar manner in order to allow for efficient in- and out-coupling of the pump and laser radiation from the wedge. This concept transfers the complexity of the multi-mirror optics into the thin disk itself in a monolithic fashion. With this concept, we achieved 890 W of CW output power, 59% slope efficiency, optical-to-optical efficiency of 50%, and a gain factor greater than 10 for small signals. This demonstrates that this new concept is capable of reaching the kW power regime with minimum complexity and size.
Ablating surfaces with a pulsed laser system in milling processes often leads to surface changes depending on the milling depth. Especially if a constant surface roughness and evenness is essential to the process, structural degradation may advance until the process fails. The process investigated is the generation of precise thrust by laser ablation. Here, it is essential to predict or rather control the evolution of the surfaces roughness. Laser ablative milling with a short pulse laser system in vacuum (≈1 Pa) were performed over depths of several 10 µm documenting the evolution of surface roughness and unevenness with a white light interference microscope. Power spectral density analysis of the generated surface data reveals a strong influence of the crystalline structure of the solid. Furthermore, it was possible to demonstrate that this effect could be suppressed for gold.
We present a modified version of the two-arm, two-color, single second harmonic generation heterodyne dispersion interferometer, as introduced by Irby et. al. [Rev. Sci. Instrum. 70, 699 (1999) ]. The amount of optical elements is reduced and digital in-phase and quadrature demodulation is used to retrieve the phase shift from a single photodetector signal. The intrinsic system noise and drift for this device are analyzed by measuring the Allan deviation. We investigate the use of this device for relative atmospheric pressure measurement. Relative pressure measurements are performed in a pressure chamber and referenced against a piezoresistive pressure transceiver to demonstrate the concept. It was found that the deviation was less than 150 Pa and an error estimation has been derived.Published by Optica Publishing Group under the terms of the Creative Commons Attribution 4.0 License. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI.