The Qinghai–Tibet Plateau is the highest and largest permafrost area in the middle and low latitudes of China. In this region, permafrost thaw settlement is the main form of expressway subgrade disaster. Therefore, the quantitative analysis and regionalization study of permafrost thaw settlement deformation are of great significance for expressway construction and maintenance in the Qinghai–Tibet region. This paper establishes a thaw settlement prediction model using the thaw settlement coefficient and thaw depth. The thaw depth was predicted by the mean annual ground temperatures and active-layer thicknesses using the Radial Basis Function (RBF) neural network model, and the thaw settlement coefficient was determined according to the type of ice content. Further, the distribution characteristics of thaw settlement risk of the permafrost subgrade in the study region were mapped and analyzed. The results showed that the thaw settlement risk was able to be divided into four risk levels, namely significant risk, high risk, medium risk and low risk levels, with the areas of these four risk levels covering 3868.67 km², 1594.21 km², 2456.10 km² and 558.78 km², respectively, of the total study region. The significant risk level had the highest proportion among all the risk levels and was mainly distributed across the Chumar River Basin, Beiluhe River Basin and Gaerqu River Basin regions. Moreover, ice content was found to be the main factor affecting thaw settlement, with thaw settlement found to increase as the ice content increased.

Soil thermal conductivity is a dominant parameter of an unsteady heat-transfer process, which further influences the stability and sustainability of engineering applications in permafrost regions. In this work, a laboratory test for massive specimens is performed to reveal the distribution characteristics and the parameter-influencing mechanisms of soil thermal conductivity along the Qinghai–Tibet Engineering Corridor (QTEC). Based on the measurement data of 638 unfrozen and 860 frozen soil specimens, binary fitting, radial basis function (RBF) neural network and ternary fitting (for frozen soils) prediction models of soil thermal conductivity have been developed and compared. The results demonstrate that, (1) particle size and intrinsic heat-conducting capacity of the soil skeleton have a significant influence on the soil thermal conductivity, and the typical specimens in the QTEC can be classified as three clusters according to their thermal conductivity probability distribution and water-holding capacity; (2) dry density as well as water content sometimes does not have a strong positive correlation with thermal conductivity of natural soil samples, especially for multiple soil types and complex compositions; (3) both the RBF neural network method and ternary fitting method have favorable prediction accuracy and a wide application range. The maximum determination coefficient (R²) and quantitative proportion of relative error within ±10% ( $P_{\pm 10\%}$ ) of each prediction model reaches up to 0.82, 0.88, 81.4% and 74.5%, respectively. Furthermore, because the ternary fitting method can only be used for frozen soils, the RBF neural network method is considered the optimal approach among all three prediction methods. This study can contribute to the construction and maintenance of engineering applications in permafrost regions.

The comprehensive understanding of the variation law of soil thermal conductivity is the prerequisite of design and construction of engineering applications in permafrost regions. Compared with the unfrozen soil, the specimen preparation and experimental procedures of frozen soil thermal conductivity testing are more complex and challengeable. In this work, considering for essentially multiphase and porous structural characteristic information reflection of unfrozen soil thermal conductivity, prediction models of frozen soil thermal conductivity using nonlinear regression and Support Vector Regression (SVR) methods have been developed. Thermal conductivity of multiple types of soil samples which are sampled from the Qinghai‐Tibet Engineering Corridor (QTEC) are tested by the transient plane source (TPS) method. Correlations of thermal conductivity between unfrozen and frozen soil has been analyzed and recognized. Based on the measurement data of unfrozen soil thermal conductivity, the prediction models of frozen soil thermal conductivity for 7 typical soils in the QTEC are proposed. To further facilitate engineering applications, the prediction models of two soil categories (coarse and fine‐grained soil) have also been proposed. The results demonstrate that, compared with nonideal prediction accuracy of using water content and dry density as the fitting parameter, the ternary fitting model has a higher thermal conductivity prediction accuracy for 7 types of frozen soils (more than 98% of the soil specimens’ relative error are within 20%). The SVR model can further improve the frozen soil thermal conductivity prediction accuracy and more than 98% of the soil specimens’ relative error are within 15%. For coarse and fine‐grained soil categories, the above two models still have reliable prediction accuracy and determine coefficient (R²) ranges from 0.8 to 0.91, which validates the applicability for small sample soils. This study provides feasible prediction models for frozen soil thermal conductivity and guidelines of the thermal design and freeze‐thaw damage prevention for engineering structures in cold regions.