Air quality monitoring is a very important aspect of providing safe indoor conditions, and carbon dioxide (CO${}_2$) is one of the pollutants that most affects people’s health. An automatic system able to accurately forecast CO${}_2$ concentration can prevent a sudden rise in CO${}_2$ levels through appropriate control of heating, ventilation and air-conditioning (HVAC) systems, avoiding energy waste and ensuring people’s comfort. There are several works in the literature dedicated to air quality assessment and control of HVAC systems; the performance maximisation of such systems is typically achieved using a significant amount of data collected over a long period of time (even months) to train the algorithm. This can be costly and may not respond to a real scenario where the habits of the house occupants or the environment conditions may change over time. To address this problem, an adaptive hardware–software platform was developed, following the IoT paradigm, with a high level of accuracy in forecasting CO${}_2$ trends by analysing only a limited window of recent data. The system was tested considering a real case study in a residential room used for smart working and physical exercise; the parameters analysed were the occupants’ physical activity, temperature, humidity and CO${}_2$ in the room. Three deep-learning algorithms were evaluated, and the best result was obtained with the Long Short-Term Memory network, which features a Root Mean Square Error of about 10 ppm with a training period of 10 days.

Sarcopenia, affecting between 1–29% of the older population, is characterized by an age-related loss of skeletal muscle mass and function. Reduced muscle strength, either in terms of quantity or quality, and poor physical performance are among the criteria used to diagnose it. The current gold standard methods to evaluate sarcopenia are limited in terms of their cost, required expertise, and portability. A possible alternative for sarcopenia detection and monitoring is surface electromyography, which offers comprehensive information on muscle function, but a systematic synthesis of the existing literature is lacking. This systematic review aims to evaluate the application of sEMG in diagnosing and monitoring sarcopenia, focusing on the muscles involved, signal processing techniques, artificial intelligence models, and statistical analysis methods used for data interpretation. Following PRISMA guidelines, a search was performed in PubMed, Scopus, and IEEE databases from 2014 up to December 2024. Original studies using sEMG for sarcopenia diagnosis or assessment in older populations were included. After removing duplicates, 145 articles were identified, of which 18 were included in the final analysis. The findings indicate a growing interest in the adoption of sEMG in sarcopenia assessment. However, methodological heterogeneity among studies limits comparability. sEMG represents a promising option for the early detection of sarcopenia, but standardized guidelines for data collection and interpretation are needed. Future studies should focus on clinical validation and results reproducibility.

In the medical field, there are several very different movement disorders, such as tremors, Parkinson’s disease, or Huntington’s disease. A wide range of motor and non-motor symptoms characterizes them. It is evident that in the modern era, the use of smart wrist devices, such as smartwatches, wristbands, and smart bracelets is spreading among all categories of people. This diffusion is justified by the limited costs, ease of use, and less invasiveness (and consequently greater acceptability) than other types of sensors used for health status monitoring. This systematic review aims to synthesize research studies using smart wrist devices for a specific class of movement disorders. Following PRISMA-S guidelines, 130 studies were selected and analyzed. For each selected study, information is provided relating to the smartwatch/wristband/bracelet model used (whether it is commercial or not), the number of end-users involved in the experimentation stage, and finally the characteristics of the benchmark dataset possibly used for testing. Moreover, some articles also reported the type of raw data extracted from the smart wrist device, the implemented designed algorithmic pipeline, and the data classification methodology. It turned out that most of the studies have been published in the last ten years, showing a growing interest in the scientific community. The selected articles mainly investigate the relationship between smart wrist devices and Parkinson’s disease. Epilepsy and seizure detection are also research topics of interest, while there are few papers analyzing gait disorders, Huntington’s Disease, ataxia, or Tourette Syndrome. However, the results of this review highlight the difficulties still present in the use of the smartwatch/wristband/bracelet for the identified categories of movement disorders, despite the advantages these technologies could bring in the dissemination of low-cost solutions usable directly within living environments and without the need for caregivers or medical personnel.

Surface electromyography (sEMG) is increasingly important for prevention, diagnosis, and rehabilitation in healthcare. The continuous monitoring of muscle electrical activity enables the detection of abnormal events, but existing sEMG systems often rely on disposable pre-gelled electrodes that can cause skin irritation and require precise placement by trained personnel. Wearable sEMG systems integrating textile electrodes have been proposed to improve usability; however, they often suffer from poor skin–electrode coupling, leading to higher impedance, motion artifacts, and reduced signal quality. To address these limitations, we propose a preliminary model of smart socks, integrating biocompatible hybrid polymer electrodes positioned over the target muscles. Compared with commercial Ag/AgCl electrodes, these hybrid electrodes ensure lower the skin–electrode impedance, enhancing signal acquisition (19.2 ± 3.1 kΩ vs. 27.8 ± 4.5 kΩ for Ag/AgCl electrodes). Moreover, to the best of our knowledge, this is the first wearable system incorporating hydrogel-based electrodes in a sock specifically designed for the analysis of lower limb muscles, which are crucial for evaluating conditions such as sarcopenia, fall risk, and gait anomalies. The system incorporates a lightweight, wireless commercial module for data pre-processing and transmission. sEMG signals from the Gastrocnemius and Tibialis muscles were analyzed, demonstrating a strong correlation (R = 0.87) between signals acquired with the smart socks and those obtained using commercial Ag/AgCl electrodes. Future studies will further validate its long-term performance under real-world conditions and with a larger dataset.

Gait is a complex motor process that involves the coordination and synchronization of various body parts through continuous interaction with the environment. Monitoring gait is crucial for the early detection of abnormalities, such as toe walking, which is characterized by limited or absent heel contact with the floor during walking. Persistent toe walking can cause severe foot, ankle, and musculature conditions; poor balance; increased risk of falling or tripping; and can affect overall quality of life, making it difficult, for example, to participate in sports or social activities. This study proposes a new approach to detect toe walking using surface Electromyography (sEMG) on lower limbs. sEMG sensors, by measuring the electrical activity of muscles, can see signals before the movement corresponding to muscle activation, contributing to an early detection of a possible problem. The sEMG signal presents significant complexity due to its noisy nature and the challenge of extracting meaningful features for classification. To address this issue and enhance the model’s robustness across different devices and configurations, a Transfer Learning (TL) approach is introduced. This method leverages pre-trained models to effectively handle the variability of sEMG data and improve classification accuracy. In particular, Continuous Wavelet Transform (CWT) is applied to sEMG-filtered signals (with time windows of 1 s) to convert them into 2D images (scalograms). Preliminary tests were performed on a public dataset using some of the most well-known pre-trained architectures, obtaining an accuracy of about 95% on InceptionResNetV2.