Effects of hot pixels on pixel performance in light and dark environments have been investigated in pinned photodiode 0.18 μm backside illuminated CMOS image sensors irradiated by 10 MeV protons. After exposure to protons, hot pixels and normal pixels are selected from the whole pixel array, and their influences on key parameters are analyzed. Experimental results show that radiation-induced hot pixels have a significant impact on pixel performance in dark environments, such as dark signal nonuniformity, long integration time, and random telegraph signal. Hot pixels are caused by defects with complex structures, i.e., cluster defects. Furthermore, the dark current activation energy result confirms that the defects causing the hot pixels have defect energy levels close to mid-gap.
1 August 2020 in IEEE Transactions on Nuclear Science
As a power management chip widely used in various electronic systems, the low dropout regulator (LDO) plays a crucial role in the normal operation of electronic systems. Ionizing radiation and electromagnetic pulse (EMP) radiation can cause interference and damage to the LDO, posing risks to the proper functioning of electronic systems in large-scale scientific devices. In this study, through separate experimental investigations on the Total Ionizing Dose (TID) effects, EMP effects, and synergistic effect of the LDO, it was found that parameters such as the LDO output voltage decreases with increasing irradiation dose, with more severe degradation observed under grounded bias. The EMP effects mainly cause oscillations in the LDO output voltage and a slight increase in its mean value. The results of the synergistic effect experiments indicate that there is a certain synergistic interaction between the TID effects and the EMP effects. The synergistic effects lead to an increase in the amplitude of the oscillations and changes in the mean value of the output voltage.
Star sensors are widely used by satellites for their precise pointing accuracy. However, protons in space will cause cumulative effects and single-event transients in the imaging systems of star sensors. These effects will affect the success rate of star map recognition of star sensors. In this paper, proton irradiation experiments and field tests were carried out in turn, and three typical star recognition algorithms were used to recognize the star maps. The results showed that cumulative effects led to a decrease in the number of identifiable stars, which greatly affected the recognition success rate of the grid algorithm. Hot pixels caused by displacement damage effects increased the star centroid positioning error, leading to a decrease in the recognition success rate of the triangle algorithm and pyramid algorithm. Single-event transients produced by protons hitting the image sensor are similar to the grayscale value and shape of a star, and were recognized as “false stars”, which had a significant impact on the success rate of the three recognition algorithms. In general, the pyramid algorithm was more effective than the other two algorithms in identifying the affected star map, and the recognition success rate of the grid algorithm was significantly reduced.
The nuclear industry and other high-radiation environments often need remote monitoring equipment with advanced cameras to achieve precise remote control operations. CMOS image sensors, as a critical component of these cameras, get exposed to γ-ray irradiation while operating in such environments, which causes performance degradation that adversely affects camera resolution. This study conducted total ionizing dose experiments on CMOS image sensors and camera systems and thoroughly analyzed the impact mechanisms of the dark current, Full Well Capacity, and quantum efficiency of CMOS image sensors on camera resolution. A quantitative evaluation formula was established to evaluate the impact of Full Well Capacity and quantum efficiency of the CMOS image sensor on camera resolution. This study provides a theoretical basis for the evaluation of the radiation resistance of cameras in environments with strong nuclear radiation and the development of radiation-resistant cameras.
19 January 2023 in Radiation Effects and Defects in Solids
In order to investigate the effect of temperature on proton radiation in the charge-coupled device (CCD), charge transfer efficiency (CTE) and dark current are tested at different temperatures on interline transfer CCD irradiated with protons. The aim of this paper is to analyze the characteristics of the defects introduced by proton irradiation in CCD and describe the mechanism of temperature effect on sensitive parameters of proton radiation effect in CCD. For the increasing temperature of −50°C ∼40°C, CTE begins with a decrease, followed by a minimum of 0°C, and ends with an increase; dark current (DC) increases significantly with the increasing temperature. By combining these results, a conclusion is made that temperature will affect the effect of defect introduced by proton, including the effect of the defect on the carrier mobility and lifetime, so as to affect the performance parameters of CCD.