Fouling organisms reduce a ship’s fuel efficiency and disturb the ecosystem. Therefore, the International Maritime Organization (IMO) and many nations have enacted laws that mandate periodic hull cleaning for removing fouling organisms. However, cleaning niche areas of the ship hull is extremely difficult. Due to their complex shape, applying antifouling paint and cleaning with hull cleaning robots is difficult, but about 80% of fouling organisms are concentrated in the niche areas. To resolve this issue, this research proposes the use of an autonomous cleaning robot with a hydraulic polyarticular robot arm to clean niche areas of the ship hull. This robot can approach niche areas of the ship hull with complex shapes using its polyarticular arm. It was designed to be able to scan the cleaning area, establish a cleaning plan, and clean accordingly. This robot autonomously cleaned a propeller blade, which is a typical niche area of the ship hull, to verify the applicability of this system. The experiment results show that approximately 80% of the biofouling was removed from the hull crevices and 81% of the cleaned biofouling was recovered.

The Crabster CR200 is an underwater walking robot inspired by crabs and lobsters, designed for precise seabed inspection and manipulation. It maintains stability and position on the seafloor, even in strong currents, by adjusting its posture through six legs, each with four degrees of freedom. The key advantage of the CR200 lies in its ability to resist drifting in strong currents by adapting its posture to maintain its position on the seafloor. However, information is still lacking on which specific posture generates the maximum downforce to ensure optimal stability in the presence of currents and the seabed. This study aims to determine the fluid forces acting on the CR200 in various postures using Computational Fluid Dynamics (CFD) and identify the posture that generates the maximum downforce. The posture is defined by two parameters: angle of attack and seafloor clearance, represented by the combination of the robot’s pitch angle and distance to the seabed. By varying these parameters, we identified the posture that produces the greatest downforce. Through a series of analyses, we identified two main fluid dynamic principles affecting the downforce on a robot close to the seabed. First, an optimal pitch angle exists that generates the maximum downward lift on the robot’s body. Secondly, there is an ideal distance from the seabed that produces maximum suction on the bottom surface, thereby creating a strong Venturi effect. Based on these principles, we determined the optimal robot posture to achieve maximum downforce in strong current conditions. The optimal underwater robot posture identified in this study could be applied to similar robots operating on the seafloor. Furthermore, the methodology adopted in this study for determining the optimal posture can serve as a reference for establishing operational postures for similar underwater robots.