Position recognition is one of the core technologies for driving a robot because of differences in environment and rapidly changing situations. This study proposes a strategy for estimating the position of a camera mounted on a mobile robot. The proposed strategy comprises three methods. The first is to directly acquire information (e.g., identification (ID), marker size and marker type) to recognize the position of the camera relative to the marker. The advantage of this marker system is that a combination of markers of different sizes or having different information may be used without having to update the internal parameters of the robot system even if the user frequently changes or adds to the marker’s identification information. In the second, two novel markers are proposed to consider the real environment in which real robots are applied: a nested marker and a hierarchical marker. These markers are proposed to improve the ability of the camera to recognize markers while the camera is moving on the mobile robot. The nested marker is effective for robots like drones, which land and take off vertically with respect to the ground. The hierarchical marker is suitable for robots that move horizontally with respect to the ground such as wheeled mobile robots. The third method is the calculation of the position of an added or moved marker based on a reference marker. This method automatically updates the positions of markers after considering the change in the driving area of the mobile robot. Finally, the proposed methods were validated through experiments.
1 September 2021 in Journal of Korea Robotics Society
This paper proposes a robotic system that automatically identifies and removes spatters generated while removing the back-bead left after the electric resistance welding of the outer and inner surfaces during pipe production. Traditionally, to remove internal spatters on the front and rear of small pipes with diameters of 18–25 cm and lengths of up to 12 m, first, the spatter locations (direction and length) are determined using a camera that is inserted into the pipe, and then a manual grinder is introduced up to the point where spatters were detected. To optimize this process, the proposed robotic system automatically detects spatters by analyzing the images from a front camera and removes them, using a grinder module, based on the spatter location and the circumferential coordinates provided by the detection step. The proposed robot can save work time by reducing the required manual work from two points (the front and back of the pipe) to a single point. Image recognition enables the detection of spatters with sizes between 0.1 and 10 cm with 94% accuracy. The internal average roughness, Ra, of the pipe was confirmed to be 1 µm or less after the spatters were finally removed.
31 August 2021 in Journal of Power System Engineering
Recently, various in-pipe robots have been developed, but they are difficult to apply to the field due to their short driving distance. In order to increase the mileage of the piping robot, traction is an essential element, especially for running in pipes. In this paper, we propose a high traction piping robot capable of running mid to long distance inside pipes. The running performance of the designed piping robot was confirmed through multi-body dynamics analysis, and structural stability of the robot was reviewed through structural analysis. In addition, the performance of the manufactured robot was verified by comparing the traction force of the manufactured robot with the analysis result, and the climbing performance was confirmed through a driving test on the pipe test bed. As a result, a high-traction pipe robot can tow 400 kgf of auxiliary equipment and can move vertical and horizontal curved pipes with a diameter of 500 to 800 mm up to 45 degrees.