This work presents a comprehensive study on a particular kind of conveyor called second-generation voltage conveyor (VCII). This building block is based on voltage conveying concept and is the dual of second generation current conveyor (CCII). It is shown that VCII is a very useful block in those configurations where CCII is limited, in terms of number of active blocks. The results of this study are helpful in choosing the best building block between CCII and VCII for each specific application. Finally, for the first time, the CMOS implementation of VCII is also presented. Simulation results with PSPICE using 0.35μm CMOS technology and supply voltage of ±1.65V are given to approve the theory.

The development of Internet of Things (IoT) systems is a rapidly evolving scenario, thanks also to newly available low-power wide area network (LPWAN) technologies that are utilized for environmental monitoring purposes and to prevent potentially dangerous situations with smaller and less expensive physical structures. This paper presents the design, implementation and test results of a flood-monitoring system based on LoRa technology, tested in a real-world scenario. The entire system is designed in a modular perspective, in order to have the capability to interface different types of sensors without the need for making significant hardware changes to the proposed node architecture. The information is stored through a device equipped with sensors and a microcontroller, connected to a LoRa wireless module for sending data, which are then processed and stored through a web structure where the alarm function is implemented in case of flooding.

The authors here propose an analog interface for differential capacitance estimation, able to reveal and quantify capacitive variations. Different from other works in the literature, the proposed interface can operate on a full-range scale. This solution takes inspiration from a preliminary work of the same authors, whose working principle is based on a modified De-Sauty AC bridge configuration; in particular, two (differential) capacitors and two resistors are employed, one of which is implemented by a voltage-controlled resistor (VCR). In this paper, the electronic interface has been redesigned to obtain full-range operation and a linear input-output characteristic. The implemented autobalancing mechanism controls the VCR generating a reference voltage following the sensor output. Simulation results in two different circuit configurations performed by OrCAD PSpice have shown a very good agreement with a theoretical model implemented in MATLAB/Simulink environment. In addition, an evaluation of the goodness of the experimental measurements at steady and unsteady conditions is given. Experimental tests on a discrete-component prototype have been carried out using an automated test equipment including National Instruments tools and a dedicated software in the LabVIEW environment. Measurements have shown satisfactory results, the standard deviation being on the order of 0.01, in the worst case. The linearity error has been evaluated as well, resulting in lower than 1% full scale.

It is necessary to ensure safety in terms of health and accidents through the real-time monitoring of the construction site environment and workers. This problem has become of great importance due to the economic and social implications. Therefore, a sensor-based approach has been found to be beneficial in Building Information Modeling (BIM). Wireless Sensor Network (WSN) technologies are well-suited for the deployment of monitoring systems. A suitable technical solution for node communication in a WSN is Long Range (LoRa) modulation technology. In this study, an autonomous LoRa-based system for the monitoring of a construction site in Lungro, Calabria, Italy, is presented. The spatial monitoring of working personnel is achieved by employing a tracker device with an Inertial Measurement Unit (IMU) and a Global Positioning System (GPS) device. Accesses of personnel and gear to the site are registered using Radio Frequency Identification (RFID) tags equipped with protective gear. Fixed-position solar-powered sensor nodes are also employed for structural monitoring, i.e., movement sensors are used to monitor the variation of scaffolding, building structures, and under-work housing inclinations. Long Range Wide Area Network (LoRaWAN) gateways interface with the nodes and the internet for data exchange, enabling an Internet of Things (IoT) paradigm for the monitoring solution. A comprehensive overview of the workers and structural nodes, along with the RFID access management system and LoRaWAN gateway features, is provided in this article. A description of the web interface is also reported.

In this paper, a new low-voltage low-power dual-mode universal filter is presented. The proposed circuit is implemented using inverting current buffer (I-CB) and second-generation voltage conveyors (VCIIs) as active building blocks and five resistors and three capacitors as passive elements. The circuit is in single-input multiple-output (SIMO) structure and can produce second-order high-pass (HP), band-pass (BP), low-pass (LP), all-pass (AP), and band-stop (BS) transfer functions. The outputs are available as voltage signals at low impedance Z ports of the VCII. The HP, BP, AP, and BS outputs are also produced in the form of current signals at high impedance X ports of the VCIIs. In addition, the AP and BS outputs are also available in inverting type. The proposed circuit enjoys a dual-mode operation and, based on the application, the input signal can be either current or voltage. It is worth mentioning that the proposed filter does not require any component matching constraint and all sensitivities are low, moreover it can be easily cascadable. The simulation results using 0.18 μm CMOS technology parameters at a supply voltage of ±0.9 V are provided to support the presented theory.